Hi Joe,
so is your setting like this...?
Set 50 Hz at -16db
Set 100 Hz at -16db
Set 200 Hz at 0db
Set 400 Hz at 0db
Set 800 Hz at 0db
Set 1600 Hz at 0db
Set 2400 Hz at -16db
Set 3200 Hz at -16db
Thanks for advise.
73 - Petr, OK1RP
-
http://ok1rp.blogspot.com
--
View this mess
Dear Fred
Regarding your hearing aids you may be interested in a product that can send
LF from K3 directly to your hearing aids.
The Danish company Phonak are selling a device under the name of TVLink
which plugs into the line out, Scart, headphone or external speaker
connector and from it's conso
On 8/27/15 at 2:17 PM, matt.vk...@gmail.com (Matt Maguire) wrote:
If you make the cable up as a "Y", better label the two ends
very clearly, or tape up the dangerous end to avoid
accidentally connecting a serial port to the wrong side.
Perhaps using one of the Elecraft USB <--> RS232 cables w
The normal PC to K2 to KAT100 cable *is* a "Y" cable of sorts, look in
the KAT100 manual for the details.
It is not possible to get it backwards because the PC end has female
pins while the KAT100 end has male pins.
The only "problem" that could occur with a properly made cable is that
the conne
Reading the docs and different sources on using the K3/S with a SubRx in
diversity receive the primary and sub DSP settings mirror. Am I miss-reading
or is there the ability to independently configure the SubRx DSP? If this
feature isn't available I'd like to ask for it to be considered. As a
minim
Yes Don,
I for one thought I had a dead USB/serial converter until I realized that I had
it connected backwards (K2 end to KAT100 and KAT100 end to K2)!
It does not harm anything, but the PC will not connect.
/OZ4UN
-Oprindelig meddelelse-
Fra: Elecraft [mailto:elecraft-boun...@mailman.q
I just got my UPS tracking number and my new K3s will arrive on
Wednsday. So now the decision of whether to keep my K3 100 as a backup
or sell it.
It is s/n 8164 and was purchased in April of 2014. It is a basic K3. Has
the KTCX03-1 1ppm TCXO and the 2.8kHz 8 pole filter, KANT3 (no antenna
t
Re "I am anxious to see if the K3s with its new
interface does it all as well as the current
setup.": Please give us a full report, Jim.
73, Phil W7OX
On 8/28/15 5:39 PM, Jim Rogers wrote:
I just got my UPS tracking number and my new K3s
will arrive on Wednsday. So now the decision of
wheth
I can't comment about the K3S vs. the K3 but with my K3S I find it works
well with all my applications running under Windows 10. I do have an
issue with WSJT and CAT control. It doesn't like the TX DATA mode on
the K3S.Other than one issue, all seems quite well with the others.
73
Bob, K
On Fri,8/28/2015 5:39 PM, Jim Rogers wrote:
So now the decision of whether to keep my K3 100 as a backup or sell it.
I would add the new K3SYNA board and hang onto it. It makes a great
second rig, you can leave it set up for your VHF station, it's a spare
for when you need to send the K3S in
Phil,
RF wise, it should be the same as the K3.
Computer-wise, it all depends on the computer and the equipment between
the computer and the K3S. Unfortunately "Universal Serial Bus" is not
so 'universal' when applied to the user.
With the variety of computer and other gear between the K3S and
Hello
My older K2, #771, is still in use after almost 16 years since I built it.
I have the internal sealed lead-acid gel cell battery option. I have the
charge circuit slightly modified using the kit from ProAudio Engineering,
and I use their superb external power supply as well.
I get great r
I was planning to take my KX3 to Italy next week on vacation, but a
consideration of import duties gives me pause. Does any have knowledge on the
legalities?
Thanks.
Tom
K4AEN
Sent from my iPhone
__
Elecraft mailing list
Home: http:
Pretty much what I plan to do with my K3.
Another fellow brings his K3 to our all-QRP Field Day, so I can add mine
to the fray.
Prior to ordering my K3S at the Huntsville Hamfest I had ordered and
received my two K3SYNA cards, so my "old" K3 will have the newer
synthesizer card and the older
Greetings,
I’ve been doing SO2V for a while now (4-5 contests anyway). I use a DB9 serial
cable from one of the desktop computer serial ports driving one W1AN FSK
Adapter and then into the K3 15pin ACC. I have 3 DIs on VFOA (MMTTY and two
2Tone (Flat and Flutter)) and 2 on VFOB (SUB RX) (o
Hi Tom,
My first reaction is that they won’t charge you anything unless you plan on
selling it there, i.e., you’re not importing it. If it’s your personal
property and you’re taking it home with you it’s the same as all the other
things you’re bringing with you.
Of greater importance is knowi
Hi Kjeld,
Yes, my aids are Phonak, I've tried the TVLink [belonged to someone
else] and it does work well. I think it's BlueTooth, my two aids talk
to each other and change programs at the same time. Sadly, they do not
include a boom mic which I need. I also need to shut out surrounding
sou
In a word: I can’t. OK, that’s two words.
I have followed the procedure and am using the PX3s calibration signal as the
signal source. I have recorded the initial Amplitude and Phase settings. I
can see the two sideband peaks on the display and watch them move closer and
further from the ce
You should have a copy of your license with you that should be marked with
something like "This license accords with the requirements of the European
Conference of Postal and Telecommunications Administration (CEPT)". This
should be printed on all US licenses. I'd also carry a copy of the rele
Steve I recommend you get a LiFePO4 charger. The two batteries may occupy
the physical space but they charge differently.
73
Fred, AE6QL
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
inventor61 .
Sent: Friday, August 28, 2015 6:52 PM
To: elecraft@
On 29 August 2015 05:56:38 CEST, Peter Lambert wrote:
>You should have a copy of your license with you that should be marked
>with something like "This license accords with the requirements of the
>European Conference of Postal and Telecommunications Administration
>(CEPT)". This should be printe
21 matches
Mail list logo