I now have a buyer for the KAT3 autotuner module. Thanks for the overwhelming
responses to my offering.
73,
Terry K4RX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.ht
P3 feature request: I'd like to be able to connect both a mouse and keyboard
and use the mouse for click to tune operation, drag and zoom, drag and
unzoom.etc..
I'm currently using $50 setup that requires a computer. If the P3 had mouse
features I'd strongly consider and probably buy it instead
The DSP and IF noise blanking are distinct and operate in series when both
are on.
IF NB shuts off the IF for a very short time when spike is detected. The
timing and width of that depends on the IF setting. The DSP NB does various
things in the number soup after the analog to digital converter.
Guys and Girls,
Thanks for pointing me in the right direction.
I will finish the RTFM and look at Fred's book.
I recently got the radio back from Elecraft and the settings were re-set to
factory. I was not aware of two NB's in the receiver.
Thanks for all the help!
Jim
W6AIM
.
-Ori
There was a recent post on a reflector (don’t know which one) that listed n1mm
function key macros for sending FSK using KY commands I think. It didn’t seem
to require any interface other than usual serial cable. I am interested in
this information.
If this will work with DX Labs as well, ple
Got the KPA500 back from Elecraft.
Problem found: L22 and other components in the 60M low pass filter circuit
burnt through the LPF PCB.
Repair $650 later: Replaced low pass filter module and installed QSK mod.
On the phone I asked what caused the failure, answer was no idea other than
component f
On Wed,11/11/2015 12:10 PM, W4GRJ wrote:
Got the KPA500 back from Elecraft.
Problem found: L22 and other components in the 60M low pass filter circuit
burnt through the LPF PCB.
60M LPF??? Last I looked, the US power limit on 60M is 100W relative to
a half wave dipole.
Repair $650 later:
In N1MM+, use the macro {CAT1ASC KY text;} to send "text". Spaces and ;
are significant - see the N1MM+ on-line documentation and the K3/KX3
Programmer's Manual.
You can insert N1MM substitution macros like #, * and ! as long as the
total length of the text to be sent stays below 24 characters
Same in the UK, Jim. Operation on 60m does not require the use of a
KPA500 unless one wants to contravene the terms of one's license.
73 de David G4DMP
In a recent message, Jim Brown writes
On Wed,11/11/2015 12:10 PM, W4GRJ wrote:
Got the KPA500 back from Elecraft.
Repair $650 later: Replac
*§ 97.313 Transmitter power standards*.
"(i) No station may transmit with an effective radiated power (ERP) exceeding
100 W PEP on the 60 m
band. For the purpose of computing ERP, the transmitter PEP will be multiplied
by the antenna gain
relative to a half-wave dipole antenna. A half-wave dipo
The KPA500 is a good small amp I use mine with an IC-9100 most of the time and
have not had any real issues with it in 4 yrs. now. For the K3's and K2 I use
Alpha amps an 87A and a newer 9500 for HF use. All I can say the brick on the
key with forever in the ads they run does say a lot. But it's
Interesting. As a field tester I tried darned hard to break mine,
unsuccessfully, guess I failed again.
Sadly, some components do fail, you just have to take it on the chin.
My experience with several MFJ products has not been good, I successfully broke
all of them at least once.
It's sometime
Hi all
Is the line out jack for a ⅛” plug?
thanks
todd
WB2ZAB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
Anyone using the K3S in cw with no roofing filter(s) and enjoying how it sounds
during a contest?
Does the DSP filtering and the audio peaking filter do the job for you without
a 500 hz roofing filter?
Thank you, in advance for your thoughts72 de Jim Rodenkirch K9JWV
Jim,
There is always the 2.7 (or 2.8) kHz roofing filter in-line even if you
have no other roofing filters.
If your situation is such that you do not encounter strong stations
within that 2.7 kHz bandpass, you can do just fine with only that
filter, the DSP is quite capable of isolating a sing
Todd,
I would think you are asking about the K3 or K3S line out jack.
Yes, it is a 3.5mm (or 1/8 inch) jack - it is stereo, so you should use
a stereo plug.
73,
Don W3FPR
On 11/11/2015 5:04 PM, todd ruby wrote:
Hi all
Is the line out jack for a ⅛” plug?
__
On Wed, 11 Nov 2015 23:00:20 +, you wrote:
When I got my K3s I was surprised how well the rig worked on CW with
the 2.7 filter, but I would sat that if you are serious about working
CW (especialy in pile-ups) You will probably want a filter in the
400Hz or 500 Hz range.
ARS N5GE
>Anyone usi
Be aware - although the line out is stereo, some sound card devices are
mono, especially some found on laptops, so you may need a mono plug on the
other end.
Robin G1MHU
-Original Message-
From: Don Wilhelm
Sent: Wednesday, November 11, 2015 11:51 PM
To: todd ruby ; Elecraft Reflec
Isn't the line out 2-channel mono, except when the sub is turned on? For
example, you won't hear the AFX effects on the line out.
Al W6LX
From: Robin Moseley
To: w3...@embarqmail.com; todd ruby ; Elecraft Reflector
Reflector
Sent: Wednesday, November 11, 2015 3:55 PM
Subject: Re: [E
I think if I chucked the power supply for my TCS12 TX and RX, the K3 and the
KX3 in the lake they would all end up at the bottom maybe take different
times to get there but I can't see any of them floating!
73
Brian KF6C.
-Original Message
Ohhh, and they need to include a power transforme
Folks,
I apologize in advance for the use of bandwidth. I've received a few
inquiries about my website (or lack thereof) and wanted to let all my
customers know that I am still in business. Comcast decided to stop
hosting websites and killed access to them a couple of weeks ago. I did
receive
Hello all
I thank you for all the help. I programmed it and it worked great. The only
thing that didn’t seem
to work is the band switching. maybe its my keyboard. I don’t know.
The power button is most convenient. I love it!
Any other goodies?
George NE2I
On Nov 10, 2015, at 7:57 PM, Paul Sa
Since I have never operated on 60m ever... You figure it out
Jack
W4GRJ
On Nov 11, 2015, at 3:33 PM, Jim Brown-10 [via Elecraft]
wrote:
On Wed,11/11/2015 12:10 PM, W4GRJ wrote:
> Got the KPA500 back from Elecraft.
> Problem found: L22 and other components in the 60M low pass filter circuit
Like I said, never ever operated on 60M, I mean never without the amp.
When discussed with Craig at Elecraft he could not explain the failure, just
referred to a component failure.
Jack
W4GRJ
On Nov 11, 2015, at 3:59 PM, David Pratt [via Elecraft]
wrote:
Same in the UK, Jim. Operation on 60
Gotta add for those that have not dealt with Dave. Super quality work and a
great up front guy to deal with. He keeps you informed as much as possible.
I assume he is still a firefighter so keep in mind his 24 hour shifts.
Looking forward to seeing your site back up and running. Currently doing
som
Well, I guess the Kenwood TS-990S that I just unpacked doesn't qualify,
even by virtue of its 54-pound weight. :-)
No tubes, less than 75 pounds, and no place to tie a rope.
73 de Jim - AD6CW
P.S. I haven't defected from Elecraft. The K3S that I ordered at the
Huntsville Hamfest is waiting
I'm interested in trying to get my MS Surface Pro 3, great to pack on the
motorcycle, hooked up and usable with my KX3, also great to pack on the
motorcycle, for portable PSK31. It's quite a departure from a 17" laptop! I
have a Signalink available also. Anyone have this set up working? What do
27 matches
Mail list logo