On Sat, 2016-07-02 at 19:33 -0700, Ken Arck wrote:
> Oh yes...holding POWER for more than 10 seconds does nothing
> either.
>
What should holding power for more than 30 seconds do?
73's, and thanks,
Dave (NK7Z)
For software/hardware reviews see:
http://www.nk7z.net
_
* On 2016 02 Jul 21:34 -0500, Ken Arck wrote:
> Oh yes...holding POWER for more than 10 seconds does nothing either.
>
> I have a feeling it's going back to Elecraft next week...
How about pulling the PA out and setting the radio back to the way it
was prior to installation (it's been nea
Oh yes...holding POWER for more than 10 seconds does nothing either.
I have a feeling it's going back to Elecraft next week...
-Original Message- From: Ken Arck
Sent: Saturday, July 02, 2016 8:13 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Well Hell I just bricked
Ouch! Sorry to hear that.
You are in the right place to get help
73 Leroy AB7CE
-Original Message-
From: Ken Arck
Sent: Saturday, July 02, 2016 8:13 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Well Hell I just bricked my K3s
Just finished installing the 100 watt PA and
Just finished installing the 100 watt PA and all was going fine until
the 14 mHz 50 watt calibration (using the K3 Utility program). The
radio went dead and nothing I've tried brings it back to
life...GRR
I removed power completely, let it sit for 10 minutes, reconnected
and a
The 2kW monitor works pretty well at 100 watts. The 200W sensor might
have a little better accuracy at 100W and works much better for QRP.
If by "images" you mean seeing the same signal on either side of center
of the pandapter display, that doesn't happen with the P3. Unlike SDR
receivers a
My apologizes.I was working with K9TF and his requirement was N1MM
interacting with the KX3...I did not make that clear and that's my bad..
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Re-Elecraft-KX2-Evaluation-Up-Date-tp7619522p7619533.html
Sent from the Elecr
What a great combination for search and pounce RTTY. Double click the mark
Tone (upper tone peak) and go! The KX3's built in RTTY engine worked 100% with
no other RTTY programs required. MMTTY and fldigi were available but not
necessary.
Very 73 - Mike - K9JRI
___
Jim, not quite. Bob's examples work perfectly with the K3/K3S using CW
keying on DTR (or RTS) of the radio control port, and on any radio
(including the KX2/KX3) if an external keying circuit or Winkeyer is used.
It is only when you don't have a Winkeyer or external serial port keying
circuit to us
After a user reported problems with filter settings in N1MM+ in SO2V with
one VFO in CW and the other VFO in SSB, I did some investigating. I had
never tried mixed-mode dual receive before. After doing some experimenting,
first with N1MM+ and then with the radio on its own, I conclude that there
do
Yes, that was fixed long, long ago. A screw head struck the edge of one of
the boards in early K3 front panel assemblies. It wasn't noticed for a while
because in the process of prying the connectors apart, the edge of the pc
board chafing against the edge of one board was not noticed.
I'm surpri
Hi,
I have my KX1 hooked up to an external filtered adjustable power supply.
Does the below look reasonable for Voltage vs Power on ATU tune-up? SWRs all
read 1.3-1.5 8-14V
14V - 2.8-2.6W (which rapidly dropped to 2.0-2.1 over 3-5sec)
12V - 2.0-2.1W
10V - 1.5-1.6W
8V -0.9-1.1W
Thanks, 73s,
Bret
I received my K-POD this afternoon and proceeded to do the front panel
mod. The instructions say to simply remove the 3 top and 2 bottom front
panel screws and pry off the front panel. In the past I recalled
needing to remove the left side panel but couldn't really remember why.
When I was u
-- Forwarded message --
From: "Ken G Kopp"
Date: Jul 2, 2016 2:51 PM
Subject: Re: [Elecraft] GoBox for the KX-2
To:
Cc:
BUT ... All the TX heat is trapped inside the box with nowhere to go! It
-will- be a serious problem!
73
Ken - K0PP
_
BUT ... All the TX heat is trapped inside the box with nowhere to go! It
-will- be a serious problem!
73
Ken - K0PP
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
P
Yes, just received mine too - Hey Elecraft, where is v 1.16.3.11 hidden???
Beautiful work of art indeed!
73 Dwight NS9I
On 7/2/2016 11:00 AM, Roger Marrotte wrote:
I just received my K-Pod. It looks and feels really nice. Nice and heavy.
Won't wander across the desktop. The manual mentions
Bon - none of your examples will work with an Elecraft KX3 and/or, I believe,
a K3 or KX2...any macro for my KX3 must look like below (everything
after KY and before ;} is what you can alter, up to 24 characters including
spaces):
F1 CQ, {CATA1ASC KY CQ TEST k9jwv k9jwv test;}
72 de Jim R. K
Very nice, almost pristine, Astatic D-104 Silver Eagle. With W2ENY element
and Elecraft 8-pin connector installed. Chrome is fully intact, and you
have to search really hard to find any scuffs. Asking $100 with free
shipping.
__
Elecraft
Jim,
Regarding how to reprogram the F key messages in N1MM, simply right click on
any F key block in the N1MM window and all the messages will pop up in an
editable mode. You can type in anything you want. The format is this:
ExampleF1 CQ,CQ FD de K9TF K9TF The first CQ and anything B
On 6/30/2016 7:20 PM, Keith Onishi wrote:
> Re: K-pod - is it shipping?
Received my K-Pod today via USPS. When updating the K3 firmware to
beta 5.50 to support the K-Pod, the update failed and left me in MCU LD
bootloader mode. Disconnected the P3 power and restarted the K3
Utility. The Utili
I have a couple of questions asking why I am selling the 4m transverter for the
KX3. (Is it no good? etc)
The reason is simply that I want to be able to work on 144 MHz with my KX3 wit
external transverter AND monitor 70 MHz or 50 MHz, so I have another rig that
covers 50/70 MHz and a dual band
I just received my K-Pod. It looks and feels really nice. Nice and heavy.
Won't wander across the desktop. The manual mentions requiring K3 firmware
version 5.50 or later. I found that in the beta section and loaded it
without problem. The manual also mentions "Be sure you have K3 utility
Prog
I'd definitely buy a second P3 for my sub-RX if the IF Out was on the
back panel and it was incorporated into the firmware...
__
Clay Autery, KY5G
MONTAC Enterprises
(318) 518-1389
On 7/1/2016 5:04 PM, Bill Frantz wrote:
> Thanks Don.
>
> Part of my reasoning for posting was t
William,
The images will not be changed by the TX MON.
The resolution of the power display on the P3 will be increased by a
factor of 10 if you change to the DCHF-200a - you can order one from
Elecraft.
73,
Don W3FPR
On 7/2/2016 2:59 AM, will...@zendamateur.nl wrote:
I have a K3 100 Watt an
While attempting to connect Win4K3's AUX1 com port to DXLabs Commander via HHD's Virtual
Serial Port I was unable to communicate from Win4K3 (frequency and mode data)to Commander
even though all commands sent from Commander to Win4K3 were being received and properly
executed. A support request
For anyone in the UK with a KX3 who wants to get on 4m, I have an Elecraft
internal transverter for the KX3 available for sale. I am prepared to fit it to
your KX3 if you bring it to my QTH.
Price £169 fitted to your KX3. (List price is £269)
Can also ship this item, buyer pays postage.
Cas
My K3 has the TCXO 1%
73, Roger
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3S-new-synthesizer-query-tp7619407p7619514.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing lis
Ai4PF wrote
> everything works fine on WSP 2 except I never see any of my numerous TX's
> in the database.
Do you receive (decode) other WSPR stations? If yes, frequency and PC time
are ok.
During TX, does your ALC show 4-5 bars?
73, Markus HB9BRJ
--
View this message in context:
http://elec
Hi group,
I have a K3 100 Watt and i bought a P32 with VGA and TXmon, the TX Monitor
is 2 Kw.
I was thinking because of the fact that I am only working with 100 watt
would it be worth reducing the sensor to 200 Watt ??
1 I don't know if it is possible.
2 I don't know if I see beter ima
29 matches
Mail list logo