I just went through the opposite sideband suppression routine using the signal
generated by the PX3. It worked just as described for 160-10 meters but I could
not get any significant reduction or hardly any movement at all on the opposite
sideband. I verified that I was looking at the correct
This is a capability that's not currently available. There are a few of
us out here who would also like to see it happen, but given that the
K-Pod communicates directly with the radio CPU it might take a good bit
of software to make the radio talk back to the P3. I'm personally more
hopeful tha
Currently when I'm operating my KX3 portable, I have the
advantages of operating from a house. I use mains power and a
splitter to power both the KX3 and the PX3. It's kind of ironic
that I operate pure solar at home and mains power on the road. I
do find the idea of slipping a battery into the
I'm just getting started using macros, and would like to control the P3 via
the KPod as much as possible. Can the Markers be controlled via the KPod
knob. I can turn the markers on and off and qsy to one or the other, but
can find no way to assign the P3 knob to the KPod knob. Am I missing
someth
Hi-
I eagerly updated my KX2 firmware to ver 2.68 and had some fun test driving
the AM RX on some of the SWBC bands. Out of curiosity, I wondered how it
stacked up against my Kenwood TX590S and my EAC R-390A RX. I was impressed
with how well it sounded once I beefed up the audio with some cheap co
Re "a KX2 doesn't have RX IQ out...But you knew that when you bought it, Mark
-- Right?"
Actually that is one of the reasons I have held off buying one for a while. I
am one of the guys whose KX3 became their home station. When I am portable,
simple is better, so for me, a KX2 may be fine as
Come see Elecraft's booth in the vendor building at Shelby!
Don Wilhelm and I will be there with the same special promotion you see on
the main Elecraft page.
Cheers,
David/KG6IRW
International Distributor and Customer Support
Elecraft
831-763-4211
--
View this message in context:
http://ele
There's a really good review on the Amazon site be "bani" (3 stars) which says
the manufacturer's specs are essentially impossible. Based on his write up, I'd
look elsewhere. YMMV.
73,
Brian, K0DTJ
> On Sep 1, 2016, at 14:46, Bob Novas wrote:
>
> There's a TalentCell Rechargeable 72W, 132WH
Re "a KX2 doesn't have RX IQ out :-( ": But you
knew that when you bought it, Mark -- Right? Most
of us sure did :-)
Phil W7OX
On 9/1/16 3:03 PM, Mark via Elecraft wrote:
For those who don't know, Edouard is the author of of the Wizkers:Radio
software.
When I saw this, I thought it looked l
Well, any 12V battery will power a KX3 [or KX1, KX2, K2, K3, K1, FT-817,
etc]. Assuming a totally flat discharge curve, you can calculate for
how long based on the TX and RX drains and the duty cycle.
The TalentCell appear to be Li-ion and they have a fairly flat discharge
curve until nearly
For those who don't know, Edouard is the author of of the Wizkers:Radio
software.
When I saw this, I thought it looked like a cool idea for portable use, an
ideal companion to a KX2...except a KX2 doesn't have RX IQ out :-(
Mark
KE6BB
Original message From: Edouard Lafargue
There's a TalentCell Rechargeable 72W, 132WH 12V 11000mAh battery available
on amazon for $65. (https://www.amazon.com/gp/product/B016BJCRUO). Does
anyone have any experience with these? I'm wondering if this battery would
comfortably power a KX3. Thanks, Bob - W3DK
_
That’s very cool. I’m going to try running the PX3 and KX3 off a 12Ah Bioenno
battery and a Powerpole distribution adapter. Maybe I’ll get rid of the
internal batteries on the KX3.
> On Sep 1, 2016, at 2:27 PM, Bill wrote:
>
> Ed, Thank you for the information. Makes we want to buy the PX3,
Ed, Thank you for the information. Makes we want to buy the PX3, as if
having the P3 wasn't enough ;- )
Bill
K9YEQ
Bill
K9YEQ
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
Edouard Lafargue
With all the discussion on KX2 IQ output going on,
Hi,
The crystal filter section of the Elecraft order page has links to
both filter plots as well as the paper by Wayne and Eric that you
describe:
http://www.elecraft.com/elecraft_prod_list.htm#k3filters
hth,
73, Byron N6NUL
On Thu, Sep 1, 2016 at 12:27 PM, Barry LaZar wrote:
> At one time th
With all the discussion on KX2 IQ output going on, I don't want to muddle
things up even further, but as Mark KE6BB was reminding me earlier, there
is a nice way you can power the PX3 using a standard KX2 battery that I
demonstrated a couple of weeks back:
https://www.dropbox.com/s/39wjrgp1bad3
At one time there was a paper on the web page written by either Wayne or
Eric ( I can't remember which) that had recommendations on filter
selection. You might try and find it or get the author to republish.
73,
Barry
K3NDM
-- Original Message --
From: "Jim Brown"
To: elecraft@mailman
On Thu,9/1/2016 10:19 AM, w...@comcast.net wrote:
My primary usage will be SSB and CW contesting, and very occasional SSB and CW
DXing.
My ears find a 1.8 kHz roofing filter too narrow for SSB, preferring 2.1
kHz. The DSP IF can always be set narrower if desired.
I first bought 400 Hz 8-pol
Hello Andrew, John, Aaron and all,
No need to respond to the email if you want to subscribe.
To opt-out, please click on the "unsubscribe from the list" link
on the bottom of the email.
Thanks,
--
Madelyn Gomez
Elecraft Sales
125 Westridge Drive
Watsonville, Ca. 95076
831/763-4211
I own a K3S from 9 months. I bought it with 500hz 5 poles and 200hz 6poles. On
my old radio, an FT1000MP had INRAD chains, 8 poles. In my Elecraft I preferred
to use 5 pole and 6 poles, wide 500hz for normal operating without the little
ringings that produced tired listening. And for contests. a
Hi all,
To answer the queries, Pro Audio Engineering will not have a booth at
Shelby this year due to a scheduling conflict. To compensate those who
were looking to pick up their purchase there, we will be offering free
shipping for all orders made in the month of September to USA
addresses.
Personally, I find the 1.8 KHz filters best for SSB contesting. Otoh,
haven't used the 2.1s here. I use the 250 Hz filter for CW and some
data modes.
73,
matt W6NIA
On 9/1/2016 10:19 AM, w...@comcast.net wrote:
Hi all,
I'm a new K3 owner, and haven't really even used the radio yet. It's a
I just wanted to say thank you to Elecraft. I built / have the KX1, KX3 and
K2, all fine rigs. But I relocated m K2 up at our rustic, small, cabin in
the high sierras, as my "rig in residence". It had been a while since I
used the old K2 as the KX3 has seen daily use in the WA6ARA shack at home.
It
Hi all,
I'm a new K3 owner, and haven't really even used the radio yet. It's at
Elecraft right now getting the Synthesizer upgrade, and I need some help making
a decision on filter configuration.
My primary usage will be SSB and CW contesting, and very occasional SSB and CW
DXing.
I will ha
Ah, I read the following " You can opt-in at any time by sending us an
email at sa...@elecraft.com." and considered that I needed to opt-in.
-Aaron
On Thu, Sep 1, 2016 at 9:54 AM John Pitz wrote:
> They are not asking for permission to email you, they are assuming that
> permission has been gra
They are not asking for permission to email you, they are assuming that
permission has been granted and are asking you to opt out if that
bothers you.
On Thu, 2016-09-01 at 09:29 -0700, KD6QZX wrote:
> Keep sending..
>
>
> On Thursday, September 1, 2016 9:23 AM, KD3RF [via Elecraft]
>
Keep sending..
On Thursday, September 1, 2016 9:23 AM, KD3RF [via Elecraft]
wrote:
Here's something that's rere DX...
A message from a company ASKING FOR PERMISSION TO E-MAIL ME !
I want to get Elecraft eMails and really appreciate these guys asking.
Thanks guys!
- Forwar
Here's something that's rere DX...
A message from a company ASKING FOR PERMISSION TO E-MAIL ME !
I want to get Elecraft eMails and really appreciate these guys asking.
Thanks guys!
- Forwarded Message -
From: Elecraft
To:
Sent: Thursday, September 1, 2016 12:04 PM
Subject: A M
My K3S is back and has worked properly for 10 days now. Thanks to all for
the helpful comments.
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Power-has-disappeared-tp7620735p7622065.html
Sent from the Elecraft mailing list archive at Nabble.com.
_
29 matches
Mail list logo