Gentlemen,
My first post to the list , although an avid reader.
Has anyone here done the connection of a K3S plus a P3 Panadaptor with the
P3SVGA and Monitor functions , to a SPE 2K Amp?
Is there special cabling?
What Config Menu settings are used?
The cable supplied with the Amp is a
On Sun, Jun 4, 2017 at 7:22 PM, Marvin Wheeler wrote:
> The only way I can tell
> the noise blanker is working is that if I turn the setting to high
Hmmm,
The noise blanker has two separate components, the first is a smart
control of traditional IF noise blanking which
Every summer, Reno Nevada hosts an event called "Hot August Nights," in
August but you probably figured that out. I have no idea how many
classic vehicles it attracts, the number is huge, and affectionados will
make their hotel reservations for next year before they leave this year.
They can
Mine works great at least after I learned to configure/use it
properly granted, I am new to Elecraft, but very few of the
advanced tools are trivial to learn/use.
But it all works, and works well.
__
Clay Autery, KY5G
On 6/4/2017 6:22 PM, Marvin Wheeler wrote:
> I
Right!!!
Sent from my iPhone
...nr4c. bill
> On Jun 4, 2017, at 10:36 AM, Jim Miller wrote:
>
> or a hobby shop that sells remote control accessories. this is typically used
> to connect to servos.
>
> jim ab3cv
>
>> On Sun, Jun 4, 2017 at 10:28 AM, Nr4c
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
The last sentence of my post should have said and CLRspkr by West Mountain
Radio.
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
__
Elecraft mailing list
Home:
I have a K3S that was new in January of this year. I am very impressed with
the radio and its' receiver. Compared to previously owned Yaesu FT1000D,
75A4, KWM-2, S-Line, Drake twins, it has the best receiver by far of the
whole bunch. I do have a problem/complain in that the Noise Blanker has
Observation:
My K3 stops transmitting after 30 seconds of dashes already.
(Makes it tough curing an RFI issue single handed...)
So it appears to have a "stuck key" deadman of sorts.
Haven't checked whether it does that in other transmit conditions.
Obviously, it doesn't in JT65, PSK, SSTV.
73
In reviewing what I need to do to remote my K-Line a good solution to a
hung transmitter has remained elusive. The only sure way to kill the
transmitter is by pulling the plug, potentially scrambling the firmware.
Note that sending commands from an attached PC is not a solution since it
may have
But K3S has direct USB, no need for KUSB which is a USB to Serial converter.
Sent from my iPhone
...nr4c. bill
> On Jun 3, 2017, at 11:44 PM, Clay Autery wrote:
>
> Connecting a USB-only computer (laptops especially) to the radio would
> be my SWAG...
>
>
I experienced this problem when I first got my P3. The fix was simple:
replace the coax patch cable between the K3and the P3. It has been fine
ever since.
Bill W2BLC K3-line
--
Many of life's problems can be solved by simply deciding what
we can do without. - John Dolan
It's leakage of an internal signal from the K3 [or maybe even the P3 but
I doubt it] into your P3, most probably through the cabling. It moves
when you tune because it's coming from the radio. It's like some fairy
tale or bad dream... you can chase it but you'll never ever catch it. [:-)
Well Don, now I have understood that a LCD screen doesnt have "pixels" to
program...Thanks es 73Ian IK4EWX
Messaggio originale
Da: donw...@embarqmail.com
Data: 4-giu-2017 18.03
A: "IK4EWX",
Ogg: Re: [Elecraft] R: Re: K3 Display is
I have understood. So the display doesnt have "pixels" to program...Thanks
Don.Ian IK4EWX
Messaggio originale
Da: ml+s365791n7631392...@n2.nabble.com
Data: 4-giu-2017 18.04
A: "IK4EWX"
Ogg: Re: R: Re: K3 Display is Dated...
Ian,
That is not
Check that your cables are tight.
On 6/4/2017 10:23 AM, Mike Weir wrote:
Yesterday while on the radio I notice on my P3 screen a signal (so I thought)
the band was basically dead other than this signal. As I tried to tune to it
the signal would move. No matter how close I tried to get to the
Ian,
That is not possible without producing a new display with an icon for
that. The display is not a programmable element.
The VFOa/VFOb is already identified with an arrow which points to the
transmit VFO - it is on the right of the display.
73,
Don W3FPR
On 6/4/2017 11:50 AM, IK4EWX
Messaggio originale
Da: glcazz...@alice.it
Data: 4-giu-2017 17.50
A:
Ogg: R: Re: K3 Display is Dated...
Eric, is it possible for you to add on the K3 display, with a next firmware
release, the VFOa-VFOb shift?
Thanks, 73Ian IK4EWX
Eric, is it possible for you to add on the K3 display, with a next firmware
release, the VFOa-VFOb shift?
Thanks, 73Ian IK4EWX
Messaggio originale
Da: ml+s365791n763138...@n2.nabble.com
Data: 4-giu-2017 17.29
A: "IK4EWX"
Ogg: Re: K3 Display is Dated...
Lets close this thread now in the interest of relieving list reader overload.
Eric
Moderator etc.
elecraft.com
---
Sent from my iPhone 6S
> On Jun 4, 2017, at 4:35 AM, Drew AF2Z wrote:
>
> Not at all. Slightly large than a K3 perhaps. And requiring several separated
> LCD
Yesterday while on the radio I notice on my P3 screen a signal (so I thought)
the band was basically dead other than this signal. As I tried to tune to it
the signal would move. No matter how close I tried to get to the so called
signal it kept the same distance from my VFO A tuning indication.
P1 is a three pin 0.1" spacing PC "Header" type plug (rectangular body -
no lip). The plug housing is 0.30" W x 0.10 T x 0.60" L.
I do not know the manufacturer/part number.
73,
... Joe, W4TV
On 6/4/2017 10:07 AM, Nr4c wrote:
I'd bet on coaxial power connector as used on other Elecraft
or a hobby shop that sells remote control accessories. this is typically
used to connect to servos.
jim ab3cv
On Sun, Jun 4, 2017 at 10:28 AM, Nr4c wrote:
> Sorry. Don't have PR6. Disregard previous answer.
>
> This looks like a typical .1 center. Single row female header.
Sorry. Don't have PR6. Disregard previous answer.
This looks like a typical .1 center. Single row female header. Should find on
Mouser, Digikey or eBay. Also try Amazon.
Sent from my iPhone
...nr4c. bill
> On Jun 3, 2017, at 10:22 PM, Jeffrey Maass wrote:
>
> What is the
I'd bet on coaxial power connector as used on other Elecraft gear. A 5 X 2.1
mm.
Sent from my iPhone
...nr4c. bill
> On Jun 3, 2017, at 10:22 PM, Jeffrey Maass wrote:
>
> What is the manufacturer / type of the 'P1' plug required to provide power
> to the PR6
Not at all. Slightly large than a K3 perhaps. And requiring several
separated LCD panels instead of the "one big display" design.
73,
Drew
AF2Z
On 06/01/17 10:39, Nr4c wrote:
And the front panel would be the size of a 40 inch TV.
Sent from my iPhone
...nr4c. bill
On May 31, 2017, at
26 matches
Mail list logo