* Band pass filters are likely to be specified for operation at any
impedance consistent with a certain maximum allowable swr. Mine (made by
LBS) tolerate swr up to 2:1. As long as the antenna meets that requirement,
there is no need for a tuner between filter and antenna.
* A good multiband anten
I know, QRP SSB during FD at the bottom of the cycle. What a surprise, all 15
or so candidates made one or more contact.
Our regular GOTA guy for Ski Country ARC, K0RV-2A Colorado, took a year off so
I volunteered. We used my VW Camper, end fed UNUN and KX3.
Here are some observations:
1. T
on on
Sent from my T-Mobile 4G LTE Device88imp 8
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: htt
Good evening to all ,
The K2 modifications to put the KPA 100
Should they be made, before putting the KPA 100?
For the first tests step 2 of the KPA100 with dialogue and assembly in the K2,
well step 3 or we have mounted the transistors of the final
Thank you in advance for your remarks
73 , C
Christophe,
If your K2 serial number is 3000 or greater, those modifications do not
have to be done at all, they are already present on the RF Board.
You do need to mount the headers at P3 and P6 and remove pin 4 from the
10 pin header at Control Board P4.
Those changes may be made at any t
Well I took the plunge and just ordered my first Elecraft radio, the
KX2! I also ordered the ATU and battery/charger. Will the ATU be
installed before shipping?
Just a quick hello. Been reading the mail list on the list web site and
just joined it as well.
73!
Tom - KB2SMS
_
Hi Tom,
Yes, the ATU will be installed at the factory. Let me know if you have
questions about the rig.
73,
Wayne
N6KR
> On Jun 26, 2017, at 4:06 PM, Tommy wrote:
>
> Well I took the plunge and just ordered my first Elecraft radio, the KX2! I
> also ordered the ATU and battery/charger. Wil
USB audio with the default settings has been fine for me from the first
day. Check your settings?
On Thu, Jun 22, 2017 at 10:31 AM, Dick via Elecraft <
elecraft@mailman.qth.net> wrote:
> Hello Elecraft,
>
> When feeding the audio from the K3S USB port to the CPU, the K3S audio
> level is extr
Tom,
Your KX2 will come fully assembled with all the options you ordered at
the same time as the KX2.
Options ordered afterward have to be installed by the owner unless the
KX2 is sent back to the factory (you need an RSA assigned for that -
contact support).
73,
Don W3FPR
On 6/26/2017 7:06
Thank you Wayne I will!
73!
On 06/26/2017 07:11 PM, Wayne Burdick wrote:
Hi Tom,
Yes, the ATU will be installed at the factory. Let me know if you have
questions about the rig.
73,
Wayne
N6KR
On Jun 26, 2017, at 4:06 PM, Tommy wrote:
Well I took the plunge and just ordered my first
Welcome aboard both the reflector and the Elecraft owner family. You will love
that rig.
Harlan
K4HES
Sent from my iPhone
> On Jun 26, 2017, at 7:16 PM, Tommy wrote:
>
> Thank you Wayne I will!
>
> 73!
>
>
>
>> On 06/26/2017 07:11 PM, Wayne Burdick wrote:
>> Hi Tom,
>>
>> Yes, the ATU wi
Richard - I second your report, there is no fine adjustment for the USB
audio on the K3s either in received audio or transmitted audio. When the
band is noisy, I have to reduce LIN OUT to 01 or alternatively reduce
the overall system gain with the RF gain (which in the case of the K3
and K3s is
Can't help but wonder, is anyone adjusting the recording and playback in
Windows?
Mine works fine by adjusting those. I don't do any vhf though.
73 Dwight NS9I
On 6/26/2017 7:59 PM, Jim Rogers wrote:
Richard - I second your report, there is no fine adjustment for the
USB audio on the K3s eit
Gotta remember that there's no audio here, just numbers that represent
audio. Somewhere in the PC there is a setting that instructs a program to
set a reference level for the digital signal. It's not at all like running
coax from line out jacks. The digital doesn't pick up hum or flat-top. Just
num
See subject.
Sent from my iPhone
...nr4c. bill
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www
On 6/26/2017 10:00 PM, Guy Olinger K2AV wrote:
Audio from the K3S via USB is never actual audio in the K3S. After
the low IF hits the A/D converter, it's number soup everywhere
between the A/D and the far end of the USB cable.
Wrong! The stereo input of "USB Audio CODEC" is fed by the "Line
Jim,
What are the settings for the K3S CODEC in the computer?
Look at your soundcard settings and set them to something lower. There
is normally no need for an additional control in the K3S other than the
normal LINE IN gain settings. The settings for the K3/K3S computer LINE
OUT (or SPKR) s
Bill,
My FW and CONFIG files are in; C/Users/RICK "or whatever you
use"/AppData/Roaming/Elecraft/K3 Configuration or K3 Firmware/file x
Hope this helps
Rick, W7LKG
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Nr4c
Sen
It's probably under C:\Users\username\Appdata\Roaming\Elecraft. Check K3
Utility Help for Firmware and Configuration tabs for details.
73 de Dick, K3KR
On Monday, June 26, 2017, Nr4c wrote:
> See subject.
>
> Sent from my iPhone
> ...nr4c. bill
>
> _
Sorry for the OT post … but I am thinking of using one of my Elecraft rigs in
the truck … mobile applications.
Does anyone know the amp rating of the two 12v power outlets in the Silverado
1500 for 2017?
And, if you do know, is it switched (with the ignition) or always on?
Thanks in advance.
I would expect to find the info in the owner's manual. Or your
dealership's
service desk.
73!
K0PP
On Jun 26, 2017 22:58, "Eugene Worth" wrote:
> Sorry for the OT post … but I am thinking of using one of my Elecraft rigs
> in the truck … mobile applications.
>
> Does anyone know the amp ratin
Hi all,
In the process of analyzing a recently repaired KX2, we discovered that
key-down times I stated earlier were optimistic. They applied to two prototype
KX2s that didn’t have the final driver and PA bias circuitry that we optimized
to achieve good TX IMD targets. My apologies for quoting
Gene,
Well, my Silverado is 2004, not 2017, but HD2500 Crew Cab, which is a little
bigger than a 1500.
I didn’t bother with trying to use existing wiring, rather I just took my truck
down to the local Car Toys dealership and told them what I wanted and they did
it. They are experts at wiring
23 matches
Mail list logo