One other thing, have you perhaps got the PX3 Noise Blanker switched on and the
PX3 NB level turned up high? That causes spikes at the centre. (I am not
referring to the KX3 noise blanker)
73 from David GM4JJJ
> On 16 Jul 2017, at 23:06, Dave Sublette wrote:
>
> I have had my PX3 for a litt
This comes up quite often, and here is a reply from Wayne about it. You can
check your PX3 as follows.
> Are you using a PX3 or P3? Assuming it's a PX3, try this:
>
> - make sure RX I/Q is set to ON (KX3 menu)
> - make sure the PX3->KX3 cables are fully seated
> - connect an antenna to the KX3
>
Good morning all,
I read all of the latest suggestions, and they were good ones. I got into the
menu and determined that the noise blanker was off, as it should have been.
The PX3 seems to be working properly now and the main thing that helped was
turning on the preamp in the KX3. I use the
I, too, have had excellent support from QRPworks with my Ham Central Terminal.
The SideKar is a newer product and does a bit more than the HCT, so I'm sure
anyone would do well with it. I had used my HCT for Field Day to send QSO info
and for logging.
73 de Ray
K2ULR
KX3 #211
___
I have a feeling I've bumble-fingered something on my KX2 configuration for
CW decoding.
CW decoding is not happening anymore with received signals. Though, oddly,
it's working when I touch the paddles.
As background, I had installed for test purposes Ham Radio Deluxe Software.
After I used it th
Not only FM, Ron. In my car it's for both FM, MW and LW
The lines are formed in a strange way, not just horizontal parallel
wires but here and there are openings. It works well on all three bands,
that is until the last MW and LW transmitters are turned off here in
Europe and FM will be left al
Is the RF gain all the way up (-0)? Preamp ON? Is the CWT cursor blinking
with the received CW? Make sure the filter is centered on the PITCH tone
(indicated by the *. Use the SPT to tune the signal.
Just a few thoughts. Hope it helps.
73,
Brian, K0DTJ
> On Jul 17, 2017, at 08:38, Tom Par
In my Model S all AM/FM broadcast reception antennas are hidden in the
driver-side mirror housing.
I suggest you simply make a physically small antenna that can fit under
some plastic part of your car. Wayne has a Prius so it is mostly
plastic bodywork providing lots of opportunities.
Then
I am looking for both the PX3 and the KXPA100 with the tuner installed with
all the associated cables.
If you are thinking about selling yours please let me know what you are
asking.
I also have a beautiful ALS-600S w/PS that I would be willing to trade if
someone has interest in that.
I have found certain instances when using a software program to control
/ communicate with the radio, when closing the software application it
may not terminate correctly and thus leave some odd data in the radio or
leave the radio in questionable or unknown state. This most often
occurs when
Hi Elecraft,
and also a "high five" to David - met you on "HAM radio 2017" at QRP
project!!
Thanks for your time and the nice discussion.
Now my very special problem I try to post to the "masses" to explain
how to improve transverter work at frequencies from 23cm up to 1.5cm with
KX3.
Hopefully o
Would it be possible to add a menu feature to change the Power On/Off
button combo to buttons on the bottom row, for example PRE+DLY.
I find when using the KX3 as a base radio the BAND+ATU TUNER buttons are
more difficult to press at the same time as would buttons across the bottom
row.
Thanks!
That's kinda the idea! It's harder to have the radio accidentally get turned
on while hiking up the mountain in the backpack. After all, it's a PORTABLE HF
radio.
It does however get to be a pain when used on a desk even in the camper.
Sent from my iPhone
...nr4c. bill
> On Jul 17, 2017, a
To clarify, I fully understand the reason the button combo is needed. I'm only
asking if a menu option could be implemented to use the bottom row as an
alternative, not replacing the current setting. With people using the KX3 on
the desk and not portable it feels more natural to press the lower
The power switch pair is not a software controlled option, but a
hard-wired circuit that cannot be made configurable.
73,
Lyle KK7P (designer of the board)
On 7/17/17 3:45 PM, Scott Russell wrote:
On Jul 17, 2017, at 3:22 PM, Scott Russell wrote:
Would it be possible to add a menu feature
Greetings,
I have an older K3 with the digital voice recorder. When I play a
digitally recorded message the monitored audio makes it sound like I’m
listening to a sideband station that’s tuned a couple hundred cycles high.
Others who hear my transmitted signal do not hear this offset. Does anyo
16 matches
Mail list logo