Why not ground the antenna and feed it as a Unipole? Most AM BC
stations are doing that these days. They also use a remote tuner,
although it is usually a fixed network as they only use one frequency.
That way the reflected power on the line is nil.
73
Bob, K4TAX
On 2/13/2018 12:29 PM, C
Its fixed. :-)
Eric
/elecraft.com/
On 2/13/2018 10:33 AM, Don Wilhelm wrote:
John and all,
That is a website "quirk" only and you can expect it to be fixed as soon as
the webmaster can get to it.
The KPA500 has NOT been replaced by the KPA1500 - both are viable products.
Note that it is sti
John and all,
That is a website "quirk" only and you can expect it to be fixed as soon
as the webmaster can get to it.
The KPA500 has NOT been replaced by the KPA1500 - both are viable products.
Note that it is still on the Order page. Also this month, the
KAT500/KAT500 Power Combo has a sp
I have been using MFJ tuners outside (MFJ-927) on a 43' vertical in
southwest Florida for many years. The only complaint I have is that they
don't get along with thunderstorms. I've probably gone through half dozen
of these over the years. However, it's worth it to me because when they
work, the
I’ve noticed in the last week or so some errors like prices being off by a
factor or ten, etc. But quickly fixed...like the kids were having fun on dad’s
laptop 😳.
No problem though, I too easily bought a new K3s...
Chuck
ke9uw
Sent from my iPhone, cjack
> On Feb 13, 2018, at 11:33 AM, Eric S
Chris,
If all else fails, cheat. Probably the very simplest thing you can
do is mount an 17 meter element in parallel to the 80 meter element. It
will be cheaper and no less efficient.
73,
Barry
K3NDM
-- Original Message --
From: "Chris Hallinan"
To: "John W2XS"
Cc: ""
Sent: 2
And it is now fixed. Sorry about that! Thanks for the heads up everyone.
No change to KPA500 product status. Still for sale and selling well. :-)
73,
Eric
/elecraft.com/
On Feb 13, 2018, at 6:00 AM, Mark Goldberg wrote:
The KPA500 links seem to have been broken on the Elecraft Website:
N
Working on this problem now. Thanks for catching it.
Wayne
http://www.elecraft.com
> On Feb 13, 2018, at 6:00 AM, Mark Goldberg wrote:
>
> The KPA500 links seem to have been broken on the Elecraft Website:
>
> Not Found
>
> The requested URL /KPA500/KPA500.htm was not found on this ser
Entropy always wins.
Logan, KZ6O
Sent from my iPhone
> On Feb 13, 2018, at 7:52 AM, rich hurd WC3T wrote:
>
> Confucius say, he who play with root, eventually kill tree. :)
>
>
> On Tue, Feb 13, 2018 at 10:36 AM, Bob McGraw K4TAX
> wrote:
>
>> Ya know...when one tinkers with someth
I was thinking of a similar remote setup, wondering which remote autotuner
is recommended?
Thanks,
Frank w4tg
On Feb 13, 2018 8:56 AM, "Chris Hallinan" wrote:
> I have a very similar setup. K3 -> KPA500 -> MFJ 994BRT 600W autotuner
> mounted remote -> Balun Designs 4:1 -> 600 Ohm open wire line
Confucius say, he who play with root, eventually kill tree. :)
On Tue, Feb 13, 2018 at 10:36 AM, Bob McGraw K4TAX
wrote:
> Ya know...when one tinkers with something that works, often they end
> up with something that doesn't work.Just sayin'
>
> 73
>
> Bob, K4TAX
>
>
>
> On 2/13/2018
Ya know...when one tinkers with something that works, often they end
up with something that doesn't work. Just sayin'
73
Bob, K4TAX
On 2/13/2018 9:26 AM, rich hurd WC3T wrote:
Hmm. I'd say that was sort of indicative of the entire Elecraft.com
domain... nothing seems to be online.
Hmm. I'd say that was sort of indicative of the entire Elecraft.com
domain... nothing seems to be online.
On Tue, Feb 13, 2018 at 9:44 AM, j...@kk9a.com wrote:
> The photo also vanished from the products page
> http://www.elecraft.com/elecraft_products_page.htm
>
> I guess it was replaced by
The photo also vanished from the products page
http://www.elecraft.com/elecraft_products_page.htm
I guess it was replaced by the KPA1500 :)
John KK9A
From: Mark W7MLG
Date: Tue Feb 13 09:00:53 EST
The KPA500 links seem to have been broken on the Elecraft Website:
Not Found
The requested URL
Have you tried adding some additional length to the 600 ohm feedline? I
originally couldn't perfectly match 30 meters with the Johnson Matchbox and
added about 15 or 18 feet IIRC. That brought 30m into range and didn't mess
up the other bands too much. Since your worst band is 17m, you might need
Thanks, Don,
Yes I understand the basics - the doublet is not typically used in a
"matched" configuration, thus the need for the tuner. If I understand
correctly, it can present from very low to very high impedances to the
tuner. I will try a 1:1 and/or adding some wire length. Also, as I
menti
Chris,
Try a 1:1 balun instead of the 4:1. You are matching the impedance seen
at the shack end of the feedline, and that can vary from very low to
very high.
The impedance you have to match is NOT the characteristic impedance of
the feedline. The 600 ohm line simply acts as an impedance tra
Continue with the balanced line to the dipole ~ mine is spaced 10cm #
14 wire {home-assembled}
and use the Johnson Match-Box = it is a balanced line output tuner ~ NO
need for a current balun
or similar, like a Z-Match . . . Reference: REFLECTIONS by Maxwell
Cheers, Jan K1ND
___
Thanks, Bob. I'll do just that when I get a chance. And I might just try
the 1:1 also! I have an Array Solutions analyzer, been meaning to scan it
to see exactly what the tuner sees. All of this requires a ladder and some
creative juggling of tools/laptop etc. ;)
73
Chris
On Tue, Feb 13, 2018
Chris;
Add or remove about 6 ft of the open wire line. See if this helps the
17M issue.
I personally don't like the idea of using a 4:1 balun and much prefer a
1:1 current balun. With the 4:1, without measuring the Z on the coax
side, it may be the Z presented to the tuner is very low and
The KPA500 links seem to have been broken on the Elecraft Website:
Not Found
The requested URL /KPA500/KPA500.htm was not found on this server.
73,
Mark
W7MLG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/el
Does it have any upgrades, such as the new Synth and DSP module?
I've just seen a K3 + P3 go for $2670 on eBay UK.
73,
Alan. G4GNX
-Original Message-
From: John Fritze
Sent: Tuesday, February 13, 2018 1:42 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Used K3 price?
I am h
I have a very similar setup. K3 -> KPA500 -> MFJ 994BRT 600W autotuner
mounted remote -> Balun Designs 4:1 -> 600 Ohm open wire line to 80 m
doublet.
It works fantastic on 80-20, but will not tune better than about 2:1 on
17. I cannot use the KPA500 on 17 because the SWR is too high. Nothing
I'
I am helping a friend. What does a used K3 go for today?
K3 Serial number +/- 6500
100 watts
Antenna tuner
No other options. Looks like new (inside and out) non smoker
OK to e-mail me direct, thanks
--
John Fritze Jr
K2QY
k...@arrl.org
ENY Section Manager
Twitter: @k2qy
401 261 4996 (cell)
__
Yes, is very sad.
I am very sorry that Bill left us.
I proudly own his second Elecrat K2 #6254, he built that K2 in the 2007
with all the options and he sold it in 2009.
I don't know how it arrive to me, but i am happy to own it, i love the
K2 and that K2, it will never live my shack.
K3_E
Please consider joining us for the weekly Elecraft
SSB net on Sunday’s at 18:00z (UTC).
We meet at 14.303.5 in the 20m band.
Eric, WB9JNZ, who serves as Net Control sends the
following log from this last week’s net (see below).
73
John, N6JW
Elecraft SSB Net 2-10-2018
WB9JNZ Eric IL K3 4017
In fact my N-connector at my in-line Bird Meter element does get warm
enough at 1500w at 144-MHz to "barely" discern by touch. Since room
temp (70F) is 17c the connector may be at about 25c (nothing to write
home about).
When I first began operation of my 2m-8877 above 1kW it did burn up a
N
27 matches
Mail list logo