The helpful folks at Pro Audio Engineering (https://proaudioeng.com/)
have made up a custom cable for me to I can use a short stub connected
to both my KX3 and PX3 with single Anderson Powerpole on the stub. My
understanding is they will make this more widely available, so you might
ask them i
Any update on this? I just got my k-pod and experience the same issue.
I would really like to have the same counts on the k-pod as the VFO on the
K3.
73 Ake SA6BNV
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing
Hi,
I just got my K-pod.
I notice that if I don't turn the knob slowly, it doesn't change frequency
very smoothly.
Anyone else also experiencing this?
My main usage will by contesting in CW and I want to be able to quickly scan
the band but as it is right now that doesn't work very well. The VFO o
Update: The above is only valid when the K3 is in diversity mode, I just
noted.
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth
Just trying to get on FT8 with K3. Receive fine but unable to transmit.
Settings are as follows:
Com1, 38400,DB 8,2,No handshake,DTR Com1, Data/Pkt
What am I doing wrong? Any help would be appreciated.
73, Jim, W5ODD
---
This email has been checked for viruses by Avast antivirus software.
h
I have same experience on quickly turning K-Pod main nob with mostly SSB mode.
I guess K3 MPU is too busy to respond to the turning.
Activating a macro with F1 -F8 button while some PC application is monitoring
or controlling K3 through serial port does not sometimes work properly. For
example,
All, I'm trying to find a copy of either sdr14.dll or sdrIQx.dll. If any of
you could point me towards it, I'd really appreciate it.
73 Joe N9OK
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://
Jim,
Are you setting your audio correctly to produce 4 bars with the 5th bar
flickering on the ALC meter? If not, you will not transmit properly.
See the article on my website www.w3fpr.com. Scroll down in the left
column to the last article and click the link.
Ignore the recommendations on
I am assuming you are running WSJT-X.
I don't think you can use the same COM port for the CAT Control and PTT
Method. If you don't want to use a separate COM port for PTT then you
should be able to get it to work by selecting CAT instead of DTR.
Mike - KI0HA
On 2/18/2018 16:00, James Bobo
Mike,
The same COM port can be used for both control and PTT. You must set
the K3 KEY-PTT menu to the correct setting (depends on the PTT setting
you have chosen in your software application. If the red TX indicator
does not turn on, you have not set it correctly.
OTOH, using PTT via CAT c
Good Evening,
Forty meters was OK this evening. Fast QSB, noise, but decent
signals. After last week's unseasonably warm weather it's gone the
other way with snow, ice, rain & wind. The wind is kicking up so I may
lose power and antennas. However, the snow is pretty dry it may just
blo
Found it. Thanks!
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This lis
I do not have the same issues. I have programmed mine and it works as I want.
I don't know if you have programmed yours, but would be ok to send you what I
have done. However, you most likely won't like mine. So I suggest using the
manual to do your own. Just attaching... I think you must d
13 matches
Mail list logo