[Elecraft] Elecraft CW Net Announcement

Good Evening,    After the first loggers had cleared a path through the northern Coast Range they left open areas between the climax cedar and hemlock forests. Homesteaders filled these areas spending years clearing out the stumps and snags. Once a field was cleared they plowed it and tried

[Elecraft] KAT500: Does SN 12XX require LPF T/R Switch Rework Rev.E modification?

I'm looking to purchase a used KAT500 serial number 12XX and I read online in a few places about needing to upgrade the LPF board if Rev. D or earlier is installed... Is this correct and necessary? Has anyone done this or had it done by Elecraft? How expensive is it? Is it know what KAT500 serial

[Elecraft] K3S TX Noise Gate

When I listen to myself in the monitor while setting Tx EQ and compression, I hear the fans in the background, so I thought I’d try the Transmit Noise Gate. I was a recording engineer, so I know what a gate is and what it should sound like. When I follow the manual instructions on how to

[Elecraft] KAT500: Does SN 12XX require LPF T/R Switch Rework Rev.E modification?

I'm looking to purchase a used KAT500 serial number 12XX and I read online a few places about needing to upgrade the LPF board if Rev. D or earlier... Is this correct and necessary? Has anyone done this or had it done at Elecraft? How expensive is it? Is it know what serial number u it's have the

Re: [Elecraft] Need suggestion for line out issue

Don, Check the Firmware Release Notes for FW 5.51 and FW 5.58. The Line Out was changed to include TX Monitor Out. You should consider the Firmware Release Notes as updates to your manual. 73, Don W3FPR On 3/17/2018 7:19 PM, Don Minkoff wrote: I am having  a new issue with my K3 on line out. 

Re: [Elecraft] Need suggestion for line out issue

Latest firmware? Check release notes. I think there has been changes in this in recent releases. Sent from my iPhone ...nr4c. bill > On Mar 17, 2018, at 7:19 PM, Don Minkoff wrote: > > I am having a new issue with my K3 on line out. I always had the right > channel/

[Elecraft] Need suggestion for line out issue

I am having  a new issue with my K3 on line out.  I always had the right channel/ sub receiver audio out of my line out jack.  Fixed level set at 10.  I no longer have any audio out from the sub receiver from my line out jack unless I press 1 to have phones out.  This works but it is no longer

Re: [Elecraft] RTTY issue (OT?)

HiScore this as another wonderful MS 'feature'.Yes it is. Permissions are made to prevent unknowedgable users and programmers from writing to areas which are under control of the operating system... The error lies with the MTTY developers. It should be in app data, My documents or a folder that

Re: [Elecraft] RTTY issue (OT?)

It may depend on where the file is stored.  If under \programs(X86) that folder needs 'special' permission for software to write that the writers must include.  When that happens, it's best to install that type of program under \MMTTY which does not have the limitations for writing. Score

[Elecraft] P3-F. Panadapter for sale

FOR SALEP3-F Panadapter $650.00 SHIPPED ... (New price $779.95 + shipping) This is my second unit - now surplus to my needs. Will ship with spiral bound manual and connecting cables – IF Cable – E980170 Power Cable – E850427 P3 to RJ45 Connector on K3S - Y Cable - Model

Re: [Elecraft] 2D Fasteners

On 2018-03-17 02:51 PM, hawley, charles j jr wrote: Someone told me the patent office issues patents now with little vetting and lets the courts figure it out. That would explain a lot if true. -- Cheers! Kevin. http://www.ve3syb.ca/| "Nerds make the shiny things that

Re: [Elecraft] 2D Fasteners

On 3/17/2018 11:51 AM, hawley, charles j jr wrote: > Someone told me the patent office issues patents now with little vetting and > lets the courts figure it out. To add to the chaos, disputes of infringement and the legitimacy of a patent are in the Federal arena while the amount of damages,

Re: [Elecraft] RTTY issue (OT?)

On 3/17/2018 11:58 AM, Joe Subich, W4TV wrote: Actually you need to edit *BOTH* MMTTY.ini and USERPARA.ini. I ran into this as well, but it's my understanding the MMTTY.ini is saved each time the program is quit, and saves current settings. So if you have 1275 set, it should be saved. Am I

[Elecraft] OT: Big Business

Wayne and Eric have too much already-demonstrated "class" to even remotely to fit into the "big business" category I referred to earlier. 73! K0PP __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

Re: [Elecraft] RTTY issue (OT?)

Actually you need to edit *BOTH* MMTTY.ini and USERPARA.ini. Replace DefMarkFreq in *BOTH* files with your chosen MARK (also "PITCH" in the K3 for AFSK_A and FSK_D). There will be one instance of DefMarkFreq in MMTTY.ini and one instance in each [Define ] section (typically 10 sections -

Re: [Elecraft] 2D Fasteners

Someone told me the patent office issues patents now with little vetting and lets the courts figure it out. Chuck Jack Sent from my iPhone, cjack > On Mar 17, 2018, at 1:10 PM, Phil Kane wrote: > >> On 3/16/2018 3:56 PM, kevinr wrote: >> >> Re-inventing things over the

Re: [Elecraft] 2D Fasteners

Wayne and others The 2D fasteners - invented, patented or not - they make for some beautiful cabinets. They are both stylish and a delight to use. More good from Elecraft Jim - W4RKS __ Elecraft mailing list Home:

Re: [Elecraft] OT: Kodak

Another example of "Big business has no morality". (;-( 73! K0PP On Mar 17, 2018 12:10, "Phil Kane" wrote: On 3/16/2018 3:56 PM, kevinr wrote: > Re-inventing things over the centuries is quite common. The problem > which needs to be solved pushes the imagination of the

Re: [Elecraft] 2D Fasteners

On 3/16/2018 3:56 PM, kevinr wrote: > Re-inventing things over the centuries is quite common.  The problem > which needs to be solved pushes the imagination of the builder into > crafting similar answers. Inventing something is a no-brainer. Getting patent protection for it is something else!

[Elecraft] Elecraft K3S Raffle Winner!

Feels like Ground Hog Day... The winner of the Elecraft K3S is Lonnie Yee, KE5MLP, from Midland, TX. Some may remember, Lonnie won last year as well. In Lonnie's defense he purchased 15 tickets. Last year he purchased a similar number. Congratulations to the lucky winner! I plan to post a

Re: [Elecraft] RTTY issue (OT?)

I prefer 915 Hz tones, and I ran into the same problem. I learned that there are several things I needed to change. First is to change the HAM default. This will work fine, UNTIL you choose another decoding algorithm, like Flutter, and MMTTY will switch back to 2125 Hz. To really solve this,

Re: [Elecraft] RTTY issue (OT?)

Rich, Jamie, Many thanks, all good now. It was AFSK A, just got confused as after exiting the menu it says DATA on the screen. Of course it was (insert favourite name of some obscure person from history) law that I found out about NET shortly after posting. I guess I never needed that in

Re: [Elecraft] 2D Fasteners

I think Wayne’s short 2D fasteners are kind of special. Being just long enough for the joint, they allow an adjustment that I’ve used so many times constructing the K transceivers, etc. to fit the panels and boards just so. Also light weight. Chuck KE9UW Urbana, IL Sent from my iPhone, cjack

Re: [Elecraft] RTTY issue (OT?)

I'm not sure why you are using DATA A instead of AFSK A, but ... If you don't want MMTTY to transmit on a different frequency from your receive frequency, turn NET on - in AFSK, that will force the TX to follow the RX. Also, you should tell MMTTY that your preferred frequency is 1275 Hz. To do

Re: [Elecraft] RTTY issue (OT?)

It will transmit on high tones, 2125low tones, 1275 is for receive...no matter what receive tones are set, will always transmit on 2125, works fine. ⁣Sent from BlueMail ​ On Mar 16, 2018, 11:53 PM, at 11:53 PM, Martin Sole wrote: >Not sure where to go with this but

[Elecraft] 2D Fasteners

Hi. For the european guys: Try http://www.box73.de/index.php?cPath=241_245 The dimensions are metric, so are the threads. I wouldn't combine those with elecraft products , but if i were to make my own enclosures etc. i'd take these. Hassle-free for the metric native. -- Ohne CW ist es