He did not say how he was recording the memory but I guess we can assume
that it was done with a key. The utility works very nice. Another work
around and better one in my opinion is to omit the "DE KG7V" from the report
and just send 5NN 80. I have made hundreds of thousands of QSOs without
ever
Thanks for reminding me to look at dumb things.
Yes, the BNC was pugged into the tuner board. Note that the
radio has been working well for a while. I ran FT8 in New
Hampshire using it in April/May. The most recent venture into
the inside was to pull the batteries to recover from a hung
Probably a dumb question, but did you unplug the jumper from the BNC connector
to the main board and plug it into the tuner board?
Grant NQ5T
K3 #2091, KX3 #8342
> On Jun 18, 2018, at 8:04 PM, Bill Frantz wrote:
>
> AE6JV
__
Keith,
The Imic to USB connection only provides the soundcard function, you
also need another USB port to provide the CAT connection to the KX3
through the KXUSB cable.
73,
Don W3FPR
On 6/18/2018 7:43 PM, Keith Onishi wrote:
My KX3 digi-mode set-up is KX3 -> iMic -> USB Hub -> Macbook and
I have a problem with the ATU board for my KX3. With the board
installed in the radio, I get high SWRs (20M settles into 25:1
or so) into a dummy load. When I removed the board and disable
it in the menu, I get good SWRs on the dummy load. These high
SWRs occure when the ATU is disabled in the
Ed,
The audio settings for the K3 and K3 are the same, control the audio so
you have 4 bars solid on the ALC meter with the 5th bar flashing.
Use the computer output controls to establish that level with the KX3
Mic Gain set to mid-range.
You will want to use the headphone output of the KX3
My KX3 digi-mode set-up is KX3 -> iMic -> USB Hub -> Macbook and letting VOX
control TX mode.
This works fine but is unable to CAT control KX3 from WJST-X.
73 de JH3SIF, Keith
> 2018/06/19 7:46、Jim Brown のメール:
>
> WSJT-X works just fine without a radio control interface -- simply let VOX
>
Yes, the stator-stator 15-120pF range applies to the mag loop
butterfly configuration. stator-stator is equivalent to 2 stator-rotor
capacitances (20-250pF) in series, approximately.
Bob NW8L
On Mon, 18 Jun 2018, Walter Underwood wrote:
Here is a link to a butterfly capacitor at Radiohaus,
On 6/18/2018 10:20 AM, Edward R Cole wrote:
Any advice from KX3 users of digital modes (particularly on 6m) would
be appreciated. It can be off-list as this as probably been "hashed
over" before (I just didn't pay attention).
I'll stick to the list. First, temperature stability is a MAJOR
WSJT-X works just fine without a radio control interface -- simply let
VOX put you in TX mode and set the radio to the frequency you want.
And, of course, audio I/O to/from computer.
73, Jim K9YC
On 6/18/2018 6:35 AM, John Newgas wrote:
I want to use my KX3 with a 12” Macbook for FT8 and
The P3 has been sold.
Mike
VE3WDM
Sent from my iPhone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
Pristine KX1 for 40M, 30M, and 20M with installed ATU and KXPD1 kit with
instructions. Includes BNC to dual banana adapter, two E-flite11.1v 2200
mAh LiPo batteries, original unmarked Elecraft manual, and Nifty Quick
Reference card. $375 shipped lower 48.
73 Steve KB3SII ... .. ..
Firstly, I am quite comfortable/experienced running JT65 with my K3,
so hopefully some of that will transfer to setting up the KX3.
I have ordered a West Mountain "RIGblaster Plug & Play" with
RJ45-to-4 ring mic jack optional cable for interfacing my laptop to
the KX3. I still have to
Great photos and story, Scott. You actually made quite a few contacts
considering the power level!
73,
Wayne
N6KR
> On Jun 17, 2018, at 7:17 PM, K9MA wrote:
>
> Last week, I took the KX2 on a little bicycle tour, and did two of the CWT
> sessions:
>
>
K3 10 watt serial number 3619 excellent shape
KAT3 Tuner
KTCX03-1
KSYN3A
KXV3 RX
KIO3
KBPF3
2.7K 5 pole crystal filter
KFL3A-6K
500Hz inrad 8 pole filter
400Hz inrad 8 pole filter
250Hz inrad 8 pole filter
Firmware updated to current release
Power cable
Elecraft mod done so radio can power on P3
Here is a link to a butterfly capacitor at Radiohaus, without the eBay
middleman.
http://www.radiohausamerica.com/produto.php?prod=1703
It looks nice, but I’m not sure I understand what they mean by the three
different capacitance ranges. The normal mag loop configuration would be to
connect
I want to use my KX3 with a 12” Macbook for FT8 and other digi-modes but it
has only one USB port.
I thought it would be elegant and lightweight use a HC05 serial to bluetooth
adaptor module for the ACC1 interface to avoid cables like the KXUSB or KXSER.
The HC05 is designed for Arduino
I just bought one on eBay from "Radiohaus". It is beautiful, high quality, ball
bearings, it spins freely so the torque requirements for a stepping motor are
almost non-existant.
__
Elecraft mailing list
Home:
Since the N6TV Y-Box works using two 2 1/2' cables, you should have no
issues. Longer DE15 cables are available if you look hard enough.
John KK9A
Bill Stravinsky k3wjv wrote:
I purchased two aux cables so I could put the amp on a separate side
table with my Acom 2000A. It was interesting
Look at the memories in K3 Utility.
Sent from my iPhone
...nr4c. bill
> On Jun 17, 2018, at 11:49 PM,
> wrote:
>
> During the All Asia CW contest I tried programming M2 to send my report,
> i.e. de kg7v 59980. Everything worked EXCEPT the play back was z kg7v 59980.
> I cleared the memory
20 matches
Mail list logo
