Re: [Elecraft] Bluetooth latency and CW reception

Thanks for that reply Phil.  Actually I also have Phonak hearing aids and a ComPilot II.  I will give that a try after I get my new K3S installed within the next few days. I have only had the hearing aids for a few weeks but the improvement has exceeded my expectations. 73, Bob N7XY On 8/1

Re: [Elecraft] KPA-1500 PSU mounting position

Yup, you can run the power supply vertically just fine. BillK3WJV On Monday, August 20, 2018, 12:12:16 AM EDT, Peter Dougherty wrote: Hi All, My KPA-1500 arrived over the weekend and I've not gotten a chance yet to set it up. In looking at both the amp and the power supply I noticed bo

[Elecraft] Utilities on Linux

Hello all, I want to install the K3, KPA500, KAT500 & P3 utilities on a Linux mint-18.4 computer. Any detailed guidelines will be much appreciated. TIA, Isaac, 4Z1TL --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus ___

[Elecraft] KPA-1500 PSU mounting position

Hi All, My KPA-1500 arrived over the weekend and I've not gotten a chance yet to set it up. In looking at both the amp and the power supply I noticed both have carrying handles and rubber feet. Are these rubber feet just there for transporting the untis, or can the power supply actually be run vert

[Elecraft] KX3 DX

Just worked TX5T on 14.028 with 5 watts on the KX3. I don't usually brag, but this was a nice QRP contact. 73, Scott N9AA __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq

Re: [Elecraft] KAT100 - Reluctant to come on, K2 often displays "not inst"

OK. I could use a little more help with this issue. Let’s re-cap where we are. Issue: KAT100 doesn’t always turn on right away. When it does this, it may or may not switch low/high power LEDs when the power control is rotated. Pressing Ant 1/2 or Tune, the K2 will indicate “not inst”. Sometime

Re: [Elecraft] WWV/WWVH Closure

Go to change.org, search for “wwv”, and there is only one petition > that matches. There is actually one petition on change.org and *two* petitions on whitehouse.gov right now. Sign *ALL* of them:

Re: [Elecraft] Elecraft's attention to detail

Well said. I own a K3s and also a K3. The K3 was to go to a friend who wanted me to set it up for him. He didn't like the low serial so I gave him the K3 I built instead and I kept the K3, it is my back-up rig and if I unplug the K3s, I plug everything into the K3 exactly the same way, same

Re: [Elecraft] WWV/WWVH Closure

The software in this reflector is murdering this URL. Go to change.org, search for “wwv”, and there is only one petition that matches. wunder K6WRU Walter Underwood CM87wj http://observer.wunderwood.org/ (my blog) > On Aug 19, 2018, at 4:04 PM, Gary Smith wrote: > > The reason why was the orig

[Elecraft] Elecraft's attention to detail

I've owned my K3 for going on 8 years. Over that time I have added various modules, KAT3, module for P3 support, KSYN3A, and now the most ambitious project of them all, last night I added the KRX3 and KBPF3. I had ordered this last upgrade back in November and it sat in the box until a week ago t

Re: [Elecraft] WWV/WWVH Closure

The reason why was the original post had spaces in the URL. This is the corrected URL and a tinyurl to click on. Send that to your friend. https://tinyurl.com/y9db9vs6 It is unfortunate the original link got

[Elecraft] Two KFL3A-1=.K filters for sale or trade

Some years ago I bought a pair of KFL3A-1.0K filters. As I've decided to reconfigure my K3 a bit in the future, I will list them for sale. Given that these are 8 pole filters, I'll accept $105 each or $200 for the pair shipped via USPS to the USA. I'd also consider trading one for a single KFL3A-

Re: [Elecraft] WWV/WWVH Closure

me too, K4WI rkr...@johngalt.biz Sunday, August 19, 2018 5:44 PM Got this from a friend who tried to sign the petition: The confirmation email came and when I clicked on the link ,it says 404 page not found. I tried five times. maybe that is why there are so fe

Re: [Elecraft] WWV/WWVH Closure

Got this from a friend who tried to sign the petition: >  The confirmation email came and when I clicked on the link ,it says > 404 page not found.  I tried five times. > > maybe that is why there are so few signatures? Ray Kruse 73  KK4WPB On 8/19/2018 2:57 PM, Bob McGraw K4TAX wrote: > More i

Re: [Elecraft] WWV/WWVH Closure

Just a heads up, for people like me who don't always read everything. When you to this site and click through they will send you an e-mail verifying that you are real...you MUST respond to that e-mail for your signature to me counted. Looks like they are about 98,000 shy of the 100 K goal, b

[Elecraft] KPA1500 - Temp reading drops when under power

Have the same issue "temp drop under power" with Serail #167.  40m. is the worst by far.   73, Dick- K9OM     In a message dated 8/19/2018 1:46:29 PM Central Standard Time, elecraft-requ...@mailman.qth.net writes:   Subject: KPA1500 - temp reading drops 10C when under power Message-ID: <5b786b90

Re: [Elecraft] WWV/WWVH Closure

Pro-tip: include links in < and > -- most mail clients will not chop them in two: On 8/19/2018 12:36 PM, Gary Smith wrote: https://petitions.whitehouse.gov/petition/ maintain-funding-nist-stations-wwv-wwvh ___

Re: [Elecraft] WWV/WWVH Closure

The link earlier provided was chopped up. This is the correct link: https://petitions.whitehouse.gov/petition/ maintain-funding-nist-stations-wwv-wwvh And here is a tinyurl link to the same link https://tinyurl.com/y9db9vs6 I signed it. 73, Gary KA1J _

Re: [Elecraft] WWV/WWVH Closure

NIST went GPS long before I retired.The Cesium and Rubidium Clocks I calibrated for Space Command had to degrade the accuracy requirements from 10 to the -12 to 10 to -10 to accommodate GPS . Made no real difference to the end users at the time. Leroy AB7CE -Original Message- From

Re: [Elecraft] WWV/WWVH Closure

Need to get casio, citizen and seiko to make a fussmy watch will no longer work right Sent from my Samsung Galaxy smartphone. Original message From: aj4tf Date: 2018-08-19 3:18 PM (GMT-05:00) To: elecraft@mailman.qth.net Subject: Re: [Elecraft] WWV/WWVH Closure Since t

Re: [Elecraft] WWV/WWVH Closure

Since the White House does not control appropriations, it is probably more "appropriate" to contact your representative and senators than to sign a White House petition that doesn't have much chance of getting addressed. 73, David AJ4TF (writing a letter to my Congress members) -- Sent from:

[Elecraft] WWV WWVH Closure ...more info

Here is another link as it is on the 2019 President's Budget "hit list". The link may be too long on this post so use copy/paste https://swling.com/blog/2018/08/nist-fy2019-budget-includes-request-to-shutd own-wwv-and-wwvh/ 73 Tom/K1TL... ___

Re: [Elecraft] WWV/WWVH Closure

More info on the topic.  I view the loss of WWV, WWVH and possibly WWVB to have a major impact on world wide communication technology in many ways.  If WWVB operation is suspended, where would be the reference for many of our atomic clocks? 73 Bob, K4TAX The National Institute of Standards

Re: [Elecraft] WWV/WWVH Closure

On 2018-08-19 01:30 PM, Tom Lizak wrote: They need 100K signatures by 15Sep2018...gonna be tough ! I was only the 1,011th person to sign. We have already lost so many international broadcasters. If we lose WWV/WWVH we lose a lot more. They provided known very accurate frequencies, time infor

Re: [Elecraft] Bluetooth latency and CW reception

On 8/17/2018 10:40 PM, Bob Nielsen, N7XY wrote: > Like many of us of a certain age, I have started wearing hearing aids Welcome to the club. > Has anyone been able to use a bluetooth connection (such as bluetooth > headphones) successfully on CW? My hearing aid devices (Phonax Audeo) use an aro

Re: [Elecraft] WWV/WWVH Closure

Hi, Just copy and paste the entire link. I am in and counted. WWV possibly closing! What a horrible thought! What are we going to do to check our radios' calibration? AB2TC - Knut NK7Z wrote > Mail wrapping cut off the end for you... > > 73s and thanks, > Dave (NK7Z/NNR0DC) > https://www.nk7z.

Re: [Elecraft] WWV/WWVH Closure

Mail wrapping cut off the end for you... 73s and thanks, Dave (NK7Z/NNR0DC) https://www.nk7z.net ARRL Technical Specialist On 08/19/2018 11:08 AM, Clay Autery wrote: Error 404 on that link... __ Clay Autery, KY5G (318) 518-1389 On 19-Aug-18 12:30, Tom Lizak wrote: This ma

Re: [Elecraft] WWV/WWVH Closure

Error 404 on that link... __ Clay Autery, KY5G (318) 518-1389 On 19-Aug-18 12:30, Tom Lizak wrote: This may not be the appropriate place for this but need to have amateur radio ops read this as many rely on the "time standards" for our radios. "NIST station WWV and sis

Re: [Elecraft] WWV/WWVH Closure

By the way, I had to login directly to my gmail account in order for the "Confirm your signature by clicking here" action to work. I initially tried from my Microsoft Outlook email client and the "Click Here" did not work. MikeW5FTD > -Original Message- > From: elecraft-boun...@mail

[Elecraft] WWV/WWVH Closure

This may not be the appropriate place for this but need to have amateur radio ops read this as many rely on the "time standards" for our radios. "NIST station WWV and sister stations are among the oldest radio stations in the United States, having been in continuous operation since May 1920. Th

Re: [Elecraft] KPA1500 - temp reading drops 10C when under power

Elecraft has a fix for this. 73, Scott K9MA -- Scott Ellington --- via iPad > On Aug 18, 2018, at 1:55 PM, Paul Baldock wrote: > > I just checked mine on 40M and when on CW Temp is bouncing all over the > place. Same into a dummy load as the antenna 300ft away. It also does it to

Re: [Elecraft] Elecraft P3 signal intensity

Thanks Fred of your great analysys, those that we can have from a University Professor as you - a true gift for us, amateur radio ops. I have read it from your great book about K3S-P3, that I own, but it is very interesting even reading replica. Anyway I asked hoping exist a setting for alignemen

[Elecraft] Ris: Elecraft P3 signal intensity

__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: ht