Elecraft K3 Transceiver-S/N 7442
KPA3 100W Power Amplifier
KANT3 Antenna input module
KXV3A RX ant., IF out and Xverter Interface. Ready for P3.
2.7 khz crystal filter
5 ppm TCXO
Original synthesizers for main and sub receivers. Ready to add sub receiver.
Radio used only indoors in a non-smoking
Way to incent me to spend money. :)
On Sun, Nov 18, 2018 at 14:46 Wayne Burdick n...@elecraft.com [KX3] <
kx3-nore...@yahoogroups.com> wrote:
>
>
> If you're wondering if an AX1 whip antenna might work for you, check out
> the early reviews here:
>
> https://www.eham.net/reviews/detail/14042
>
The current Elecraft newsletter includes a great article by Bruce, NJ3K, about
his experience working DXCC the hard way (QRP mobile CW, using a KX3). We're
hoping to entice more of you to write articles on your experiences with
Elecraft gear, or of general interest. These may appear in the
All: Recently I submitted an issue on the above item. Since then I have put 6
turns of the USB cable on a 1.0 in id 31 toroid and it reduced it. I then put 5
turns on the USB cable going to the multi jack USB adapter and that cleared up
the problem. Make sure that you use 31 mix as othes did
If you're wondering if an AX1 whip antenna might work for you, check out the
early reviews here:
https://www.eham.net/reviews/detail/14042
On a separate note, I'd like to thank everyone who replied to our query about a
40 meter extender for the AX1 (the AXE1). Based on the overwhelmingly
The Side KX end panels and cover will fit just fine the ES80 case! The ends
and cover only protrude above the VFO Knob by about .125” Scott AK6Q
www.gemsproducts.com
Sent from Mail for Windows 10
From: Wayne Burdick
Sent: Sunday, November 18, 2018 09:38
To: e...@elecraft.com;
I think this ES80 case with the KX3 and the PX3 and AX1 is the coolest
thing ever, will the KX3 and PX3 with the KX side panels (with the acrylic
fronts in place) fit okay in the the ES80?
Tnx Mike AB7RU
https://elecraft.com/products/es80_es80-kx3-carrying-case
This is the first I’ve heard of it, but I don’t keep my ear that close to the
ground on these things. It is very strange, however. Reading their website I
get a strong sense they are actually pleading for funds, while trying to tamp
down on the negative feelings about 3Y0Z’s problems.
Then
Thanks for Wayne, I would be differently interested. Take my KX3 stuff in my
RV and this would definitely be a great addition.
-
73
John
N0IB
KX3 #7432
PX3 #1114
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Wayne,
Are you thinking the 40 m extender would be an add-on? I’m close to
ordering an AX1 — should I wait for 40, or is it safe to buy now and add 40
later?
Peter W0LLN
On Fri, Nov 16, 2018 at 7:59 PM Wayne Burdick wrote:
> Hi all,
>
> Sometimes the bands normally covered by the AX1
yes I would be very interested in this
73 peter ve3so
cw for ever
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
Hi,
I was actually very fortunate-- he upgraded from his Collins gear to the
Elecraft K3, then to the new synthesizers. He only got to use his K3
gear for a year or so, then he passed suddenly. His son in law got the
K3, and loves it, so the rig got a good home.
73s and thanks,
Dave
OK1RP wrote:
"try to look for used K3 with appropriate options matched for your needs"
Dick I strongly endorse Petr's excellent advice. You can find some
excellent choices on sites such as qth.com and eham.net. I've bought and
resold 5 or 6 units since my very first SN #111 since I like to
Spectacular results Dave! You are indeed fortunate to have a good neighbor
who understands the issue and was willing to upgrade to the KSYN3A. I can
think of several instances in my 61+ years on the air when I would have
loved to have both my neighbors and myself using KSYN3As. This is
14 matches
Mail list logo
