Hi Don,
yes filter board is not inserted during these tests on page
45-46...(resistance and voltage tests)
Thanks for hints,
Petr
-
73 - Petr, OK1RP
"Apple & Elecraft freak"
B:http://ok1rp.blogspot.com
MeWe: https://bit.ly/2HGPoDx
MeWe: https://bit.ly/2FmwvDt
--
Sent from: http://elecraf
So I purchased a used K3, it arrives in a few hours.
Trying to get smart before I unbox, I recall the past user removing the 6kHz
filter and leaving in the 2.7, 500 and 250kHz filters in place.
Somewhere tonight I recall reading that all the filters need to be in
descending order. The fact that
Here is the log for last Sunday's ssb net. Thanks to all who checked in and to
the stations that helped relay stations I could not here. Remember to join us
on Sundays at 18:00Z on 14.303.5 for the net.
Elecraft SSB Net 4-21-2019
WB9JNZ Eric IL K3
I use them to toggle between fan speed 0 and fan speed 1.
Dave wo2x
Sent from my iPad
> On Apr 22, 2019, at 8:18 PM, Jim Miller wrote:
>
> Anyone find some good use for PF1 and PF2?
>
> I'm thinking of putting the KPA1500 RF deck and PSU out of arms reach but
> still in the shack to reduce th
Anyone find some good use for PF1 and PF2?
I'm thinking of putting the KPA1500 RF deck and PSU out of arms reach but
still in the shack to reduce their noise impact. I'll use the KPA1500
Utility if I decide that works for me.
If it doesn't make a real difference in noise I'll just revert to "norm
New K3S used about 2 to 3 months now for sale. It's the loaded
DXer/Contester Version. Want to sell as a complete set. I am discounting
the original price by over $1000.00.Contact Wayne...WV4TN
at qrz.com e-mail address.
_
Hi Greg,
I am afraid that depends on the VFO Setup in the Config Menu.
VFO IND, if set to YES, allows VFO B to be
set to a different band than VFO A.
73 de Chris, DL2MDU
Am 22.04.2019 um 16:31 schrieb Greg Best:
Currently, the K3 VFO A switches to the new band when selecting a new band
but VF
Have used my K3S for less than 3 months and have decided to go a different
route, so am selling the K3S, P3 and speaker. The radio is the loaded
version--meaning the DX'er/Contester version and has the latest software
updates in it. Bought it all new at just over 6200.00 dollars and will sell
at 49
Currently, the K3 VFO A switches to the new band when selecting a new band
but VFO B remains on the previous band. I can see where that might be a
good thing for certain contests but how do I set the default VFO B switch so
that it follows A or so that it also switches to the new band?
73¹s
Greg
Don (and Ed and Heinz),
Thank you for the information. I have Tom's legacy website so will look up the
board.
Don, I enjoyed my day with the Elecraft gang at the hamfest; thanks for the
invite. I'll see you at Dayton, if you can make it.
73 Jay K3BH
On Sun, Apr 21, 2019, at 22:47, Don Wilh
Sorry sorry Don,
You are absolutely correct!!!
73,
Heinz HB9BCB
Am 22.04.2019 um 13:54 schrieb Don Wilhelm :
Heinz,
That buffer amp is for an IF output from the K2, and is NOT an amplifier keying
output.
73,
Don W3FPR
> On 4/22/2019 2:34 AM, Heinz Baertschi wrote:
> There is another sourc
includes one original Y box, one newer revision box, two 15 pin cables,
and one Jameco 5V DC wall wart (non switching), 150.00 shipped in US,
paypal ok.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Hel
Don,
Sorry but I answeted to the originally question?
73,
Heinz HB9BCB
Am 22.04.2019 um 13:54 schrieb Don Wilhelm :
Heinz,
That buffer amp is for an IF output from the K2, and is NOT an amplifier keying
output.
73,
Don W3FPR
> On 4/22/2019 2:34 AM, Heinz Baertschi wrote:
> There is another
You are correct Don, Far Circuits does have the board for the N0SS amp
Keying circuit. I have installed it in both of my K2's and works great.
They also have the board for your fixed Audio out. They are hard to find on
his web page so I just called him and he took care of my order.
Ed AB4IQ
Heinz,
That buffer amp is for an IF output from the K2, and is NOT an amplifier
keying output.
73,
Don W3FPR
On 4/22/2019 2:34 AM, Heinz Baertschi wrote:
There is another source here:
DX ENGINEERING Clifton Labs Buffer Amplifier Kit for Elecraft K2 (Built &
Tested Z1C PCB, Mounting Hard
Hi Don,
I had thought about it, but it's a long way to send it and figured i should be
able to find something more local.
The Doc's suggested an equivalent which I can get ( I'll get a few just in
case), so will give it a go and see if fixes it. It certainly down on
sensitivity, my IC7400 is bet
16 matches
Mail list logo