Since my radios are not Elecraft, I use them to switch the amp between the
FLEX 64500 and the Yaesu FTdx5000
Neil N4FN
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.ht
Robie,
My K2 had the same problem that you described after a long period of not being
used. After severaldays of being left powered on and daily use, the problem
went away.
My theory is that bypass capacitors in the K2 may have "reformed" and
eliminatednoise in some circuit that was affecting
With no antenna I have a weak bird at 14.221.5 +/- ...Don't hear it on
my other
transceiver. I changed from switching ps to Old School ps and no change.
Is this
normal? BtW with my vertical antenna and present band conditions, it is
totally inaudible with the antenna connected.
_
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: ht
Wes,
FYI, my K2, S/N 7225, also has a faint birdie in about the same spot, but only
with the antenna hooked up, listening to "white" noise. There are several
birdies in all bands with no antenna, but I can only hear most of them with the
AF and RF Gain pots maxed out.
Most will disappear unde
Yes...I operated a K3s for several months with the 1st filter position open.
The K3 will need to be instructed that the position is open. The free K3
utility software will help you do that. When you set up the radio the first
time, follow the manual for setup/calibration and you will find th
OK thank you very much I don’t need any more responses I think that my thoughts
were verified everybody have a good day
Sincerely, Frank Krozel t: 1-630-924-1600 fr...@electronicinstrument.com
BSEE, AASEET, FCC Lic.# PG-18-19178, KG9H
Electronic Instrument Associates - Central, Inc. ...
Jim – you may have to put the RF deck and PSU a bit farther than out of arms
reach. I have my PSU on the other side of a nearby wall (in a utility/workshop
room) and so that unit is completely quiet. With headphones, the RF deck fans
can’t be heard, although I am considering relocating the dec
Selling K2 SN 7629, $400, off list, Paul K5HKX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://ww
Have a K3S, almost new for sale. It is the DXer/Contester Version. Get
ahold of me off the reflector at my qrz.com address.
Wayne
WV4TN
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.q
Afternoon all:
I purchased the following items in hopes of setting up a portable QRP
station/coms go kit of sorts with the Yaesu FT817ND, however I'm finding that
work and family commitments leave me little to no time for the hobby. I also
recently obtained a KX2 which also streamlines my QRP a
Running into what I'm sure is a simple matter of menu settings, but...
My K3 is set for PTT with a "normal" TX delay of 008 (I presume 8 ms.),
driving a KPA-1500. I am getting persistent reports of clipping one
dash worth at the beginning of each transmission, so my casll becomes
"E4ZR", for e
S/N 4321
has sub receiver and ATU installed
6 filters
main rx 6 khz AM, 2.7 SSB, 2.1 SSB 500 hz CW
sub rx 2.7 SSB, 500 hz CW
has the new synthesizer boards upgrade in both RX
KXV3B interface/preamp board installed (adds rx port, if out,
transverter in, 2nd preamp for 12/10/6)
K312MDKT hi
I don't know what you are missing but, when I was investigating the QSK keying
characteristics of the TS-590S, I found a digital storage scope to be very
useful. Traces showing key input to rig, amplifier keying output, RF
envelope, and RX audio were very informative.
At 30 wpm the first elem
14 matches
Mail list logo
