Phil,
I'll send you a dimensioned drawing.
73,
Wayne
N6KR
> On Jun 23, 2019, at 6:42 PM, Phil Hystad via Elecraft
> wrote:
>
> I just ordered the AX-1 antenna Tripod Adapter but I am wondering if it fits
> the camera tripod that we have. I need about two inches of clearance (i.e.
>
Check the pins on the RJ-45 connector on the K3S. They can be damaged if you
accidentally insert something besides the RJ-45 plug. You may be able to
straighten them, but if that object was metal and the K3S was powered on at the
time there is probably going to be other damage.
I would remove
I just ordered the AX-1 antenna Tripod Adapter but I am wondering if it fits
the camera tripod that we have. I need about two inches of clearance (i.e.
radius from center of attachment screw) to clear the platform designed for the
camera. I am not sure that the AX-1 tripod adapter has that
See the ad5x.com website for both manual and automatic solutions.
Ed, k9ew
On Sun, Jun 23, 2019 at 2:16 AM Howard Orridge via Elecraft <
elecraft@mailman.qth.net> wrote:
> I have a bunch of Lipos from a different and less venerable hobby which
> can comfortably work between 13.2v and 15.4v, but
How does the basic K4 compare to the K3 when it comes to receiver specs?
Is the K4 SDR just as good as the superhetrodyne K3 or do you have to
upgrade to the superdooper K4?
Lee
__
Elecraft mailing list
Home:
Check RS-232 setting CONFIG menu. It should be USB.
Sent from my iPhone
...nr4c. bill
> On Jun 23, 2019, at 6:41 PM, Peter Dougherty wrote:
>
> Hi Bill,
> Yes, I did all of that. Device manager is clean. When the problem is
> occurring it still shows up normally, and as I mentioned, I can
Try this:
http://www.ad5x.com/images/Articles/LiPo%20Battery%20Reducer.pdf
Mike
AI4NS
>
> Message: 3
> Date: Sat, 22 Jun 2019 12:57:33 -0400
> From: Chris Waldrup
> To: elecraft@mailman.qth.net
> Subject: [Elecraft] KX3 won't go above 10W
> Message-ID:
> Content-Type: text/plain;
Peter, that is a connection/connector failure!
73,
Bill
K9YEQ
https://wrj-tech.com/
-Original Message-
From: Peter Dougherty
Sent: Sunday, June 23, 2019 6:35 PM
To: 'Jack Brindle'
Cc: 'Bill Johnson' ; Elecraft@mailman.qth.net
Subject: RE: [Elecraft] K3s USB failure?
Hmm. This is
Hmm. This is interesting. I never disconnected the P3, and it sat on my main
operating desk all weekend. It was just the K3s that went outside (sunny/dry
and less than 10 feet from my shack desk).
I disconnected all the cables from the back of the K3s inside, brought it out,
connected it to
Thanks for being so gracious with it. It was good to chat with you and
to see the new unit.
I sincerely appreciate you giving me a chance to play with it, and in
trying to help me find an op whose fist was slow enough I could copy
on 20m.
Hopefully next year I'll be up to it!
73
Tox
AD6YT
On
Make sure that BOTH DE9 connectors are firmly plugged onto the P3. I ran not
this situation myself over the weekend. The serial data needs to flow through
the P3 and back to the K3S where it is then used. If one of the DE9s is not
properly connected you won’t have a full path and the USB will
Hi Bill,
Yes, I did all of that. Device manager is clean. When the problem is
occurring it still shows up normally, and as I mentioned, I can get audio
into the PC from the radio and out from the radio (with PTT switching). It's
just CAT control that's wonky.
- pjd
-Original Message-
Did you disconnect USB devices, reboot the PC and then reconnect. Also look at
device manager to make sure there are no error icons. If there are remove,
then refresh.
73,
Bill
K9YEQ
https://wrj-tech.com/
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Peter
Yes, the ports are the same, and this happened whether the PC was plugged in
to the laptop, or any USB port on the desktop.
I've done a little bit more troubleshooting and it looks like a hardware
problem on the radio. When I plug the P3 interconnect into the P3 CAT stops
responding. With just
Would a backup reload help here?
Chuck Jack Hawley
KE9UW
Sent from my iPhone, cjack
> On Jun 23, 2019, at 2:32 PM, Peter Dougherty wrote:
>
> Hi guys,
> I hope this is a case of pilot error here, but I think my K3s might have
> suffered damage today and I need help in getting this back
That sounds like the virtual COM has been changed by the OS (Windows).
Have you checked the settings for CAT, PTT etc. in N1MM+ (Config >
Configure Ports...)
Is the Port for Radio the same like the one in the device manager?
73 de Chris, DL2MDU
Am 23.06.2019 um 21:32 schrieb Peter
Hi guys,
I hope this is a case of pilot error here, but I think my K3s might have
suffered damage today and I need help in getting this back alive.
After I moved the radio out to the deck for Field Day everything worked
fine. Moved it back inside and I have no USB connectivity to any software
app
On 6/23/2019 5:53 AM, Mark Wheeler via Elecraft wrote:
I've recently noticed that I have almost no waterfall displaying on my
24" monitor which makes using the SVGA feature almost useless. I
thought maybe it was because of poor band conditions, but now I'm
wondering if there is something that
Thanks!
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
4-40
elecraft.com
> On Jun 23, 2019, at 7:09 AM, MaverickNH wrote:
>
> My AX1 came with a nut embedded in the plate opposite of the BCN connectors.
> It seems the right place to add a knurled-head screw to affix the
> counterpoise(s) during use. I went to the hardware store and the clerk
It’s a 4-40 PEM nut. Early on people discussed that the thread size was
not documented anywhere.
On Sun, Jun 23, 2019 at 10:09 MaverickNH wrote:
> My AX1 came with a nut embedded in the plate opposite of the BCN
> connectors.
> It seems the right place to add a knurled-head screw to affix the
I have a similar issue, battery is at 16.7 when fully charged so I needed to
partially discharge it before use. Many of the programmable chargers have a
discharge function ( check the current limit in this mode and then derate it,
otherwise you may fry your charger). Then when you charge set
My AX1 came with a nut embedded in the plate opposite of the BCN connectors.
It seems the right place to add a knurled-head screw to affix the
counterpoise(s) during use. I went to the hardware store and the clerk and I
tried every screw that looked like it might fir but no-go. Does anyone know
I've recently noticed that I have almost no waterfall displaying on my 24" monitor
which makes using the SVGA feature almost useless. I thought maybe it was because of
poor band conditions, but now I'm wondering if there is something that needs to be
adjusted... I used to have a near exact
If you decide to nerd out, all you need is a series diode.
73,
Victor, 4X6GP
Rehovot, Israel
Formerly K2VCO
CWops no. 5
http://www.qsl.net/k2vco/
On 23/06/2019 10:15, Howard Orridge via Elecraft wrote:
I have a bunch of Lipos from a different and less venerable hobby which can
comfortably work
I have a bunch of Lipos from a different and less venerable hobby which can
comfortably work between 13.2v and 15.4v, but have avoided use with the KX3
because of the 9v to 15v range. Has anyone risked a visit from Puff the Magic
Dragon or should I nerd out and add a voltage limiter/ cut out
26 matches
Mail list logo
