Thanks Kevin!
I tried to answer. But the signal was buried pretty deep. I think we are
just too close to one another.
It also seems like the QRM starts up as soon as the net begins, that didn't
help.
I like trying to pull you out of the noise with APF on the KX3. Pretty cool
I know this doesn't have the non-gold pin problem but I would remove and replace
the KPAIO3A and KPA just to scrub the pins and to make sure everything is seated
properly.
Wes N7WS
On 2/3/2020 3:34 PM, Carl Yaffey wrote:
When I get my K4 (hopefully May . . .), I currently plan to send in my
Carl,
Unless you are OK with operating at the 11 watt level and below, I would
ask for an RSA and send in the K3S as soon as you get it. Turn around
times on repairs are typically 2 to 3 weeks depending on the backlog.
The K4 is not likely to ship until late April or early May, and I don't
When I get my K4 (hopefully May . . .), I currently plan to send in my K3S for
repair. I have already talked with support.
The symptoms are:
1) In transmit mode, no power when raising the power above 11 watts. This
happens about 90% of the time. So the 100w amp is not totally gone.
2) In receive
Olaf,
Your best answer will come from Elecraft support.
73,
Don W3FPR
On 2/3/2020 4:10 PM, dl7...@darc.de wrote:
We have a KPA500 in our station setup of HU1DL.
After some days of operation (and changing of bands, filters, antennas),
the T/R pin diodes are blown (D8/ D9).
We have a KPA500 in our station setup of HU1DL.
After some days of operation (and changing of bands, filters, antennas),
the T/R pin diodes are blown (D8/ D9).
- amplificaton of the RF-input signal works well
- receive level/ noise level in standby is normal
- receive level/ noise level in
For those who have sold-off the beloved K3s to make room for the new K4, I
wonder if anyone has the Elecraft K3S Mini-Manual you no longer need or want?
N1BBR
__
Elecraft mailing list
Home:
But that would preclude allowing receive on the SubRX while transmitting
- in other words SOTR operation.
73,
Don W3FPR
On 2/3/2020 5:58 AM, Dave B via Elecraft wrote:
I'm somewhat surprised Elecraft don't just flip that relay into the
"protect" position whenever the radio Transmits.
Or at
I'm somewhat surprised Elecraft don't just flip that relay into the
"protect" position whenever the radio Transmits.
Or at least have a menu option for that relay's behaviour, that defaults
to the "Safe" situation (RX made "Safe" during TX.) But if you really
do need to, able to be set so the RX
A possibility is an ionospheric sounder ...
In the past there were many hundreds of 'em operated by "everyone".
Used to be plagued by one a few miles north of Denver. Another was located
behind the NBS in Boulder.
Give Google a peek
73
K0PP
On Sun, Feb 2, 2020, 15:14 Tox wrote:
>
Dany,
it looks like the RX-FES (KD9SV) and AS-RXFEP (Array Solution) protection
units combined together... isn't it ? :)
Are you using it in SO2R or Multi-Multi config?
Ref:
AS-RXFEP Limiter:
https://www.arraysolutions.com/surge-and-rf-protection/as-rxfep
RX-FESSS (KD9SV):
11 matches
Mail list logo