That's how it used to work, yes. Now it pushes all the way in but it just
won't stay there. The clicks are gone. I'll have to look at both sides of the
connector and compare with new ones.
Dave AD6A
>
> On Dec 21, 2020 at 9:43 PM, mailto:ht...@twofifty.com)>
> wr
Two clicks? You push it in and there's two clicks. Every problem I've
had (once) was I forgot the second click.
On Mon, 21 Dec 2020, AD6A wrote:
Hi Folks,
I just had a wierd DC connector failure on my KPA1500. The 75A power pole connector that feeds the back of the amplifier section just falls
Hi Folks,
I just had a wierd DC connector failure on my KPA1500. The 75A power pole
connector that feeds the back of the amplifier section just falls out. It
hasn't been hit/moved or anything for years. The failure seems to be due to the
weight of the DC cable continually pulling down on the co
All I want for Christmas is my K4. I know you are very very busy helping those
family's in need, especially this year for sure. Last year you did not send me
what I asked you for, and yes it was a K4. Something tells me I will be
bypassed again. All I ask is get those little Keebler Elves busy,
Best wishes to you and the other employees. Enjoy a restful holiday.
SNAFUs happen.
73 Bill AE6JV
On 12/21/20 at 8:41 PM, e...@elecraft.com (Eric Swartz) wrote:
> One last note - Elecraft will be closed for the holidays this Thursday and
> Friday (12/24-25) and New Years Day on Friday (1/1), w
Thanks Eric!
> On Dec 21, 2020, at 8:43 PM, Eric Swartz wrote:
>
> K4 Status Update - from deep inside Elecraft
>
> First I apologize for the delay getting this update out. I've been head
> down, along with the rest of our team and our suppliers, for a good part of
> this month working to solv
K4 Status Update - from deep inside Elecraft
First I apologize for the delay getting this update out. I've been head
down, along with the rest of our team and our suppliers, for a good part of
this month working to solve problems and get K4s flowing out to you faster.
We ran into delays in Decemb
Greetings all,
Doing some end of the year clearing out of Elecraft boards. These KSYN3 (
the original synth} were replaced by the new syth boards when they first
appear on the market in 2018. The KSYN3 boards are for sale for both at $210
or $108 each. I will pay for shipping, handling and
Sweet, Merry Christmas
-Original Message-
From: Wayne Burdick
Sent: Monday, December 21, 2020 21:14
To: gregg.w6i...@gmail.com
Cc: Elecraft Reflector
Subject: Re: [Elecraft] K4 CAT and audio over ethernet.
> On Dec 21, 2020, at 1:06 PM,
wrote:
>
> Will the K4 CAT interface be avail
Dave,
https://launchpad.net/gtkhtml
But just versions for Trusty and Precise. No updates after 2013
I have the same error on the help but never needed it. Also in the GUI
btw in KX3UtilityLINUX_1_19_9_6 which runs fine in 64bit Linux.
I found several "libwebkits" in Synaptic
Installed are Lib
> On Dec 21, 2020, at 1:06 PM,
> wrote:
>
> Will the K4 CAT interface be available over ethernet. If so, will the K4 act
> as a TCP server?
Yes.
> Will TX and RX audio be available over ethernet?
Yes.
73,
Wayne
N6KR
__
Elecra
Will the K4 CAT interface be available over ethernet. If so, will the K4 act as
a TCP server?
Will TX and RX audio be available over ethernet?
Thanks
Gregg W6IZT
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of kevinr
Sent: Sunday, December 20, 2020 23:41
To: Ele
Thanks to all checking-in and helping with relays. Signals were strong and
band noise low.
K1NW BRIAN RIK3
K8NU CARL OH K3S
NC0JW JIM CO KX3
NS7P PHIL OR K3
W9MNC MIKEFL K3S
WB9JNZ ERICILK3
AE6JV
Pat,
I do not believe they are interchangeable. Contact supp...@elecraft.com
and they can provide some test points to help analyze the problem.
73,
Don W3FPR
On 12/21/2020 11:36 AM, Ing. Pasquale Speranza wrote:
I have a problem on my K3S. Suddenly in SSB the radio started producing
splatte
I have a problem on my K3S. Suddenly in SSB the radio started producing
splatters. It is very evident when comparing with a K3. Trying with spectrum
analyzer in CW the wave is perfect, the phase noise also ok. The problem
persists excluding the KPA3A. The ALC control seems to be ok. It's likely a
f
Hi.
Decided to update the KX3. (Having also just updated the XG3Util
software, and found that device was up-to-date.)
Downloaded the current kx3util software (Linux x86 version) from the
Elecraft site, and got that "installed" such as it is.
Comm's established with the radio via genuine Elecraf
I'm looking for a P3txMon 2kw version
Email my offline
Thanks and 73 and Merry Christmas/Happy New Year... Happy Holidays!
Dean K2WW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth
TomMy K3s is serial number 11029. Factory built. I bought it in November of
2016.Hope that helps.73Mike KC8WHSent from my Verizon, Samsung Galaxy smartphone
Original message From: cx...@4email.net Date: 12/21/20 1:23
AM (GMT-05:00) To: elecraft@mailman.qth.net Subject: [Elecraf
18 matches
Mail list logo