All:
I noticed that he AGC-F setting on my K3S seems to have no effect when
in CW mode yet it works in SSB mode. When switching between AGC-F and
AGC-S the decay is slow so it appears to be "stuck" in the AGC-S setting
when in CW mode.
The AGC settings are:
AGC DCY = SOFT
AGC HLD = 0
AGC PL
Good Evening,
After two weeks a new sunspot has appeared. We are also in a stream
of solar wind. Our ionosphere is being refreshed. The auroral oval is
strong at the moment. Hopefully things will settle down a bit for
tomorrow. Noise levels are still fairly low maybe the signals will p
I'm in the ARRL CW contest this weekend and the KPA1500 has been working
fine. However, a few minutes ago I noticed I was getting about half the
output power on 20 meters that I typically get with around 30 watts drive
(about 600w vs 1200w). PA current is less than normal, around 30a.
Similar pro
Even though your s/n is 21, it was not the first K3 kit shipped. I have the
first K3 kit shipped, as I assembled the very first one, outside of the
beta testers. I also have the original knob and encoder.
Ed K1EP s/n 66
On Wed, Feb 17, 2021, 20:46 K9ZTV wrote:
> K3 serial number 21 (kit no. 1)
All:
I have an Elecraft KX1 for sale. It has the built-in tuner and paddles.
Covers 40/30/20 meters. It was aligned and given a once over by Dave,
W8FGU. He found a problem with one of the traces on the main board which
was repaired. I have the documentation showing the work that was done.
T
FS – KX2 Loaded Bundle
This was my travel QRP radio kit – but I’m not traveling! It is fully
functional and in excellent condition.
Price: $1000 (PayPal, includes free shipping CONUS)
Bret/N4SRN
KX2 80-10 M Transceiver
KXIO2 Real-Time Clock
KXAT2 Internal, Wide-Range 20-W ATU
KXPD2 KXPD2 Preci
As a side note
This problem usually is caused by the Windows updates. The update will
change the audio codecs in your Windows Sound system.
So check the settings after an update to make sure Windows did not
change them again.
It has happened to me more than times than I care to re
It was a Windows 10 problem after all.
I did a complete new WIN10 install on a 3rd PC, just to be sure I was not
taken things for granted.
Presto. All was working OK now.
Two instances of MSHV are both running, while on a separate USB audio
channel.
I clearly see the spectrum differences of
I found out that I lost the audio of the MAIN RX on the USB port of
my K3s
Thank Microsoft!
In Windows Sound Control Panel (You may need to access it via
Settings -> System -> Sound -> Related Settings)
Select the Recording tab
Select (double click) Line for USB Audio CODEC in the K3
Select
Hello Elecraft K4 design team. Looking for spec defining requirements 10MHz
Reference level for K4. Not in documentation??
Ben W4SC
Sent from Mail for Windows 10
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listin
Hi Elecrafters,
I found out that I lost the audio of the MAIN RX on the USB port of my K3s
(with SUB RX installed)
On all other audio outputs (speaker, headphone, line-out) MAIN and SUB audio
are present.
On the USB port the Right and Left audio stream are identical. (so both L
and R is MAIN
11 matches
Mail list logo