Yep. And I keep the K3 on all the time.N2TK, Tony
-Original Message-
From: Larry Boekeloo
To: elecraft@mailman.qth.net
Sent: Mon, Jan 3, 2022 11:30 am
Subject: [Elecraft] KPA-1500 Power Supply
Do most of you leave your KPA-1500 Power Supply powered up all the time
even with the RF Deck
Firmware versions 2.05 and 1.75 do not necessarily support all the same macro
commands. If you were loading a macro under v1.75, be aware that it may not be
supported with v2.05.
Alternatively, you may need to add a macro under v2.05 depending on tune power
level.
Just a thought.
73
Lyn, W0L
On 1/3/2022 8:30 AM, Larry Boekeloo wrote:
Do most of you leave your KPA-1500 Power Supply powered up all the time
even with the RF Deck off?
Yes
73, Jim K9YC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elec
Oh I intended to add, I run 20 watts as my TUNE power.
Also my other wire antenna, 240 ft center fed with 85 ft of 400 ohm
window line terminating to a hybrid 4:1 Guanella current balun and 1:1
Guanella current balun will match every frequency between 160M and 10M.
On 6M I bypass the tuner a
Yes.
On Mon, Jan 3, 2022 at 8:30 AM Larry Boekeloo wrote:
> Do most of you leave your KPA-1500 Power Supply powered up all the time
> even with the RF Deck off?
>
> Thanks.
>
> Larry, KN8N
> Kalamazoo, Michigan
> __
> Elecraft mailing l
I don't find that to be the case with my KAT500. Upgraded to 2.05 a
couple of weeks ago. I just ran 80M every 25 kHz from 3.525 to 3.975.
The original memories and a few added show 1.0:1 on my K3S at all
points. The external SWR/PWR meter between the radio and tuner input
agrees. The anten
Same here. I’m too old to continue reaching under the bench to turn it off 😆.
73,
Bill WE5P
Comfortably Numb
> On Jan 3, 2022, at 11:45, Charles K0MV wrote:
>
> Mine is powered all the time, but the RF deck is not.
>
>
>> On 1/3/22 9:30 AM, Larry Boekeloo wrote:
>> Do most of you leave your
Sure..at the place I worked we ran all the populated boards after
wave solder through a commercial dishwasher with hot water. The flux was
a petroleum based product as I recall.
73
Bob, K4TAX
On 1/2/2022 7:43 PM, elecraft-requ...@mailman.qth.net wrote:
Message: 10
Date: Sun, 2 Jan 2022
Mine is powered all the time, but the RF deck is not.
On 1/3/22 9:30 AM, Larry Boekeloo wrote:
Do most of you leave your KPA-1500 Power Supply powered up all the time
even with the RF Deck off?
Thanks.
Larry, KN8N
Kalamazoo, Michigan
___
A recently completed, aligned, and tested K2 transceiver is available for
donation. It has a KAF2 audio filter, KAT2 ATU, KIO2 serial interface, and
a W8FGU T-R Relay for an amp key line. It does not have the SSB option or
the internal battery option.
The donation must be made to an IRS "qu
Do most of you leave your KPA-1500 Power Supply powered up all the time
even with the RF Deck off?
Thanks.
Larry, KN8N
Kalamazoo, Michigan
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailm
11 matches
Mail list logo