Good Day. Does the length of the data cable between the W-2 meter and
its sensor matter? I would like to use substantially shorter cable
than came with the kit. Thanks. K8JHR
__
Elecraft mailing list
Home: http://mailman.qth.net/m
On 5/16/2023 6:40 PM, Alan Geller via Elecraft wrote:
Is what Elecraft calls mike “bias” in the K3 and K3s Owners handbooks
Equivalent to the “48 volt ghost voltage” required for condenser mikes et al
In the broadcast and music industry ?
Yes, both provide power for active electronics that boos
The mic bias is +3.3 V on the tip. On the KX3, there is also a logic level DC
voltage on the ring. This is not as clean as the mic bias and can cause some
noise on mics that short those. You can split out those signals with a TRS plug
or a stereo-to-mono splitter. See this blog post (from me) fo
Bias is a much lower voltage than phantom power.
John KK9A
Alan Geller K6ADG
Is what Elecraft calls mike "bias" in the K3 and K3s Owners handbooks
Equivalent to the "48 volt ghost voltage" required for condenser mikes et al
In the broadcast and music industry ?
It is mentioned that "mike bias"
No. "Elecraft bias" is a low voltage applied to electret mics.
73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County
Alan Geller via Elecraft wrote on 5/16/2023 6:40 PM:
Is what Elecraft calls mike “bias” in the K3 and K3s Owners handbooks
Equivalent to the “48 volt ghost voltage” required fo
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: h
Is what Elecraft calls mike “bias” in the K3 and K3s Owners handbooks
Equivalent to the “48 volt ghost voltage” required for condenser mikes et al
In the broadcast and music industry ?
It is mentioned that “mike bias” needs to to be turned on for condenser type
mikes
But off for dynamic types wh
"The issue: The fan comes on in a very short time - less than 20 seconds - and
the temp display runs up to 50+ degrees. If I start calling CQ or get into a
QSO, it doesn’t take long for the temp to show over 60 degrees and the fan is
running at max."
Max fan speed of a KPA500 is setting 6. Wit
Howdy all,
I have a spare K3 that I am considering using it in remote from my second QTH,
with much better location to the west.! I guess I need the K3/0 mini remote to
make it go so, the question is if anybody out there have one of those systems
that due to a change in his configuration doesn’
9 matches
Mail list logo