__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
There are also taps inside the KPA500 that need to be set correctly, for
the voltage you wish to use. The assembly manual fully describes setting
the taps appropriately, for your desired voltage.
73 de,
Ian, NV4C
On Mon, Jun 5, 2023, 10:58 AM Irwin KD3TB wrote:
> Joe,
> On the back of the KPA
Regarding using USB mode, if you have any EQ or processing applied, it
will also be applied to the data signal on transmit. It is best to
use the Data/Packet mode on the radio because that mode automatically
negates any EQ or signal processing. Plus it is always generates the
signal in
When switching to Data/Packet be sure the radio RX BW is 2.7 kHz. The
BW info is stored by mode in the radio.
On WSJT-X Wide Graph, set the Bin/Pixel value to 4.
73
Bob, K4TAX
On 6/5/2023 9:58 AM, elecraft-requ...@mailman.qth.net wrote:
Message: 1
Date: Wed, 31 May 2023 12:53:32 -0400
Joe,
On the back of the KPA 500 you will find a fuse plug. You will switch this
between voltages using different fusses. Be careful to use the correct
fusses for the specific voltage. You can find the directions in the manual.
Irwin KD3TB
On Mon, Jun 5, 2023 at 7:03 AM Josep via Elecraft
wrote:
Hi guys,
just a question.I have recently bought a KPA500 (#0762) in the US.I have
another one at home that a friend of mine built for me in the US.I know the
amplifier works 100-120VAC and 200-240VAC so the question is if I need to
switch some kinda interruptor inside the amplifier.I need
6 matches
Mail list logo