The 6KHz (or 13 KHz FM) filter will do an indicated 4 KHz width
with 2200 Hz center for a bandpass of 200-4200 Hz. I do it all
the time.
The reason I do not use 2000 Hz center is that the K3/K3S DSP
rolls off at 200 Hz (there is an option to set the LF response
lower but I prefer the 200 Hz
Jorg, you can have your K3S repaired by Lutz Electronics in Switzerland. He
supports all Elecraft radios and has a comprehensive workshop.
That would save you some shipping costs and hopefully some time.
https://lutz-electronics.ch
https://lutz-electronics.ch
73,
Alan - G4GNX
South Coast UK
I recently got a K3S with a 6 Khz filter. Previously had just a 2.8 for
DATA which would go to 3.20 Width and 2.60 Freq Center. With the 2.8
deselected in the Config menu and only the the 6 KHz selected for Data I
can still only go to 3.20 Khz Width and 2.60 width. On AM I can go to 5
Khz
Good. If you don't get a response, please forward your email message copy to
me and I will gladly call them on your behalf.
Bill
K9YEQ
From: Jorge Diez - CX6VM
Sent: Thursday, June 6, 2024 12:53:56 PM
To: Bill Johnson
Cc: Robert Bajuk ;
thanks Bill
my original post 2 months ago have a cc to k3support but no answer from
Elecraft
i sent them again an email
73,
Jorge
El jue, 6 jun 2024 a las 16:48, Bill Johnson () escribió:
> Jorge, email elecraft support to get good guidance.
>
> Bill
> K9YEQ
>
> Bill
> K9YEQ
>
Jorge, email elecraft support to get good guidance.
Bill
K9YEQ
Bill
K9YEQ
From: elecraft-boun...@mailman.qth.net on
behalf of Jorge Diez - CX6VM
Sent: Thursday, June 6, 2024 12:41:26 PM
To: Robert Bajuk
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3
hello to all
finally a local friend, couldn´t fix the TX problem with my K3
He follow all instructions that Robert gave me to check the LPA, but all
was OK, but the K3 go to TX but no RF output
He is sending the K3 to my house again.
Don´t know what else to test?, but it seems I will need to
7 matches
Mail list logo
