I'm considering adding a KXPA100-AT to my KX3 so I can take it to Field
Day, etc. Is the KX3 as good as the K3 was in those situations, with
multiple radios and antennas in close proximity to each other?
Guidance from anyone who has used them in a similar environment would be
appreciated!
73 de
It's selectivity and filtering are very solid. For an event like field
day, many clubs (mine included) use bandpass filters for each operating
station to avoid causing issues with their neighbors. Assuming that you
follow that same type of setup, you shouldn't have issues.
73
-- Matt N3AR
O
The Bumbles have flown. Now it's time for Skeeters to take wing. Hopefully,
like me, you thoroughly enjoyed the 2024 Flight of the Bumblebees. And that
is in no small part due to the diligence and dedication of the ARS FOBB
Managers. A big, hardy round of applause for them and a big "Thank You" as
I have a mini-pc running latest version of W11Pro - K3S connecting to it
via USB.
The PC will not boot with the radio USB cable plugged in; even if the
radio is off.
With the PC booted up, plug the radio USB in and all works normally.
Any advice appreciated - TIA
73
Terry
G4AMT
_
Turn off boot by USB in the BIOS?
Rick nk7i
> On Aug 4, 2024, at 8:18 AM, Terry _George wrote:
>
> I have a mini-pc running latest version of W11Pro - K3S connecting to it
> via USB.
> The PC will not boot with the radio USB cable plugged in; even if the
> radio is off.
> With the PC booted u
Or move the Boot by USD below the HDD
Will Shattuck
KN6TZK
On Sun, Aug 4, 2024 at 8:26 AM Rick NK7I wrote:
> Turn off boot by USB in the BIOS?
>
> Rick nk7i
>
>
> > On Aug 4, 2024, at 8:18 AM, Terry _George wrote:
> >
> > I have a mini-pc running latest version of W11Pro - K3S connecting t
It might be good enough, but it won’t be as good as a K3. The K3 is a superhet,
so the design is naturally more resistant to off frequency signals when
compared to a direct conversion receiver.
You will want to enable the ISO preamp (isolation). Without that, the KX3 will
leak RF at the VFO fre
Thanks Both - tried moving the boot order (no facility to delete); not
resolved the issue.
The PC boots up fine with the USB cable to the K3S disconnected.
Connect the USB cable to the radio - even if powered off - and the PC
will fail to boot up.
PC is Geekom MiniAir 12 running W11Pro 23H2. Wor
On 8/4/2024 9:46 AM, Walter Underwood wrote:
> It might be good enough, but it won’t be as good as a K3. The K3 is a
> superhet, so the design is naturally more resistant to off frequency
> signals when compared to a direct conversion receiver.
And the K3 includes bandpass filters for each band (
Do not allow boot from USB.
Disable USB boot option.
-- Исходное сообщение --
От "Terry _George"
Кому "Will Shattuck" ; "Rick NK7I"
Копия Elecraft@mailman.qth.net
Дата 4.8.2024, 20:54:49
Тема Re: [Elecraft] K3S + W11 ... boot USB issue.
Thanks Both - tried moving the boot order (n
Please join us on 3803kHz plus (not minus) QRM (see the Netlogger
discussion, below), 9PM ET Sunday (0100Z Monday). Note that the net
stays on the same local time, when we switch back and forth to/from
Daylight time, so the UTC time changes, but not the local time.
As daylight persists more in
3803 kHz, 9PM ET Sunday (0100Z Monday).
Thanks to the following check ins (w) and relays (rel):
Call State Radio/Amp Name
1 N8SBE MIK4D/KPA500Dave (w),(op)
2 K8NU OHK4D/KPA1500 Carl (c/o),(w)
3 WM6P GAK4D/KPA1500 Steve
Good Evening,
Conditions were passable to poor. QSB from S1 to S5 or ESP to S6 on
both bands. Storm noise was higher on 40 meters.
On 14050.5 kHz at 2200z:
W0CZ - Ken - ND
K0DTJ - Brian - CA
AB9V - Mike - IN
On 7047.5 kHz at z:
K0DTJ - Brian - CA
WM5F - Dwight - ID
K6PJV
13 matches
Mail list logo