I have a CHA-250B antenna, but it is not currently up. This antenna is only
rated for 250W SSB which is probably 100W on CW or a digital mode. I think
this antenna has a matching network and at higher powers will saturate the
cores causing SWR to rise out of control. Same thing happens for me with
James I had the 270 V Err message on my KPA500 as well, S/N 3406. It turned
out to be R16 on the PS board had opened (S/B 100 ohms). This resistor
feeds the voltage multiplier circuit to get to 270V. Don't know if this is
your problem or not but does not hurt to check. It is an SMD resistor and I
circuit for the 270V line.
Bottom line is my KPA500 is back in service.
Bruce, WB6IZG
On Sun, Jul 25, 2021 at 2:30 AM Bruce Forsberg
wrote:
> Today when using my KPA500 I switched it into operate mode from standby
> and received an error message of 270V ERR. This is the first time I have
> Moderator – North American QRO Group at Groups.IO.
>
> email: b...@wjschmidt.com
>
>
> -Original Message-
> From: Dr. William J. Schmidt
> Sent: Saturday, July 24, 2021 10:35 PM
> To: 'Bruce Forsberg' ; 'elecraft@mailman.qth.net
> '
>
> Subject: RE: [Elecra
Today when using my KPA500 I switched it into operate mode from standby and
received an error message of 270V ERR. This is the first time I have seen
this error. I partially disassembled the amplifier and measured the 270V
voltage and it is 70V, which is close to what the HV voltage measured on
I resoldered the LED backlight devices by applying a small amount of
pressure and resoldering each pin to make sure they were flush. This made
the pins of the LCD flush with the PCB holes. I soldered it this way and it
has worked. The LCD is working fine for my K2.
Bruce, WB6IZG
On Sat, Apr 10,
Just completed building a K2 kit. They had an SR1503 diode for D10 on the
RF board.
Bruce, WB6IZG
On Sat, Mar 20, 2021 at 4:43 PM Geert Jan de Groot wrote:
> The high-current low-drop diode 95SQ015, used in the K2 (it replaced
> D10, SB530, because of it's favorable voltage drop) seems to be
The lastest shipping status of all Elecraft items is at:
https://elecraft.com/pages/shipping-status
Just got my K2 kit that I ordered in November.
Bruce, WB6IZG
>
> On 2/8/21 8:45 PM, Dick Bingham wrote:
> > Has anyone received anything from Elecraft lately ? I have been
> > waiting for the
OK, this is my second attempt to get this message through the mail list.
I purchased a K2 kit (SN 7973) in November 2020 and just received it a week
ago or so. I am trying to install the LCD and backlight and am having
problems. The LCD sits too high and the pins sit just above the top solder
9 matches
Mail list logo