Re: [Elecraft] Best Portable Wire

I have had very good luck with this stranded Tefzel in 22 AWG: https://www.ebay.com/itm/262473900779 <https://www.ebay.com/itm/262473900779> It is super slick. I typically have it on a winder with a strap or hair tie to keep it together. 72 de Bryan,

Re: [Elecraft] Internal battery options for K1 & K2

Let me just put this out there: Custom LiFePO4 18650 Battery: 12.8V 4500 mAh ( 57.6Wh, 7A rate ) w PCB and connector (batteryspace.com) There is a wiring option to select for the K2 as well. 72 de Bryan, k0emt On Friday, January 29, 2021, 04:36:47 PM EST, Louandzip via Elecraft wrote

[Elecraft] K3s tx LED issue, need help

the K3 the LED in not lit, but if I touch the headset the LED lights. With the mic jack unplugged the LED does not light. I've examined all jacks and lines Seems like some sort of capacitance issue maybe. Any help would be appreciated. Thanks 7

[Elecraft] Change log / Release notes for K2 firmware?

I'm trying to locate the change log or release notes for the various K2 firmware. For example: what feature/improvements are in version X of the (ATU/IO/MCU) firmware? Is all the firmware stand alone, or should certain versions be upgraded at the same time or not mixed? 72 de Bryan,

[Elecraft] KX2 battery issue

Elecraft. Could the Tenergy battery be developing a higher than normal internal resistance? 73, AI6B *Bryan B. Brauer* __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm

[Elecraft] AX1 and AXE1

S7 to S8. I am a bit concerned that the long lever arm of the antenna combination may be introducing some strain on the KX2 BNC connector, so I try very hard to keep the rig vertical and not allow the whip to move around too much. This might be an issue in windy conditions. 73, AI6B *Bryan B

Re: [Elecraft] AXE1

I once again failed to add my call sign. Sorry. AI6B *Bryan B. Brauer, PE* *Consulting Engineer* br...@bbbrauer.com On Thu, Sep 12, 2019 at 12:25 PM Bryan Brauer wrote: > I received my new AXE1 yesterday, and today deployed the antenna with the > AX1, connected directly to my KX2 a

[Elecraft] AXE1

sitting on my deck at my Sea Ranch QTH I was able to check into the Jefferson Noon SSB Net 7204KHz with 10 watts, getting a good signal report. Much better performance than I expected! *Bryan B. Brauer, PE* *Consulting Engineer* br...@bbbrauer.com

[Elecraft] KX3 Yahoo User group

I just tried to sign on to the Yahoo KX3 user group after not having done so for some time. It is requesting an AT&T account. Is this something new? I don't want an AT&T account. AI6B *Bryan B. Brauer, PE* *Consulting Engineer* br...

[Elecraft] K4

will likely have an i9 processor with 2 TB or larger SSD, and my KX3 will still be comparable. Am I making sense? *Bryan B. Brauer, PE* *Consulting Engineer* br...@bbbrauer.com __ Elecraft mailing list Home: http://mailman.qth.net/ma

[Elecraft] K4

of a transceiver/radio hybrid? If Elecraft produces a K4 I will be interested, but if I am spending north of $4K for a radio, I want it to be in my shack longer than the next Intel microprocessor release. Am I making sense? AI6B *Bryan B. Brauer, PE* *Consulting Engineer* br...@bbbraue

[Elecraft] K2 to the field

her people have transported their K2 to the field?Just throw it in the pack?  Dry bag?  Padded bag or case?  Use something commercial off the shelf or fabricate a carrier? 72 de Bryan, k0emt __ Elecraft mailing list Home: http://mailman.

Re: [Elecraft] PROPOSAL: K2/10 Battery LiPO / 8AA carrier option

Specs say the K2 operates on 10-15V, page 2 of the K2 manual online. Here are my notes for 3S LiPO and 8AA NiMH packs: Type      Vmin Warn Vnom Vmax Vstorage  3S LiPO  9.0  9.6 11.1 12.6 11.55  4S LiPO 12.0 12.8 14.8 16.8 15.4 8AA NiMH  6.4  7.2  9.6 12.010AA NiMH  8.0  9.0 12.0 15.0 So, a 3S LiP

[Elecraft] PROPOSAL: K2/10 Battery LiPO / 8AA carrier option

ging. This approach should be both lighter and have higher capacity than current SLAB option. What do y'all think? 72 de Bryan, k0emt __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://

Re: [Elecraft] KX1 Replacement?

-HAM-RADIO-with-ATU/182773034445?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2055119.m1438.l2649  But, I don't want a knock-off and I want it as a kit.   Configured with the same screen and menus/controls as a KX2/3 (where it makes sense) and adding a KX2/3 becomes that much easier. 72 de Bry

[Elecraft] OT Re: New radio , new display -- mcHF

Also, last known to be infringing on the rights of the original developer. http://www.m0nka.co.uk/?p=5258 <http://www.m0nka.co.uk/?p=5258> > Here is a new one for ya in the QRP class > > http://www.dxzone.com/rs-918ssb-hf-sdr-transceiver/ 73,

Re: [Elecraft] Future KX3/KX2 accessories?

As for the calls for Bluetooth, it's not clear who wants it for wireless mic/headset, and who wants it for digital comms. For digital comms, I think the problem will be audio codecs adding artifacts. The A2DP[1] mandatory codecs are all lossy, and are targeted for human audio perception, not digit

Re: [Elecraft] RE/KX3 Future Accessories KX2

I have one of these, which is experimental. It's definitely an improvement over the stock KX2 VFO knob: https://gemsproducts.com/product/kx2-vfo-a-knob-beta/ Paul, VA7CDB -Original Message- Date: Thu, 30 Mar 2017 13:06:13 -0500 Subject: Re: [Elecraft] RE/KX3 Future Accessories KX2 To: el

[Elecraft] KX2 pins

Does anyone know what the pins exposed on the back of the KX2 are for? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list

[Elecraft] Lightweight Windows Laptop/Tablet for Portable work

uses a very small wall wart with 12V DC output, so should meet your power needs.   BRYAN BENNO BRAUER, PEKI6GGH __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm

[Elecraft] K2 SSB PTT Switch

Thanks for your input guys, I'll be looking into all or your suggestions. 73, Bryan VE6HBS __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Ele

[Elecraft] K2 SSB PTT Switch

Can anyone recommend an appropriate PTT switch for my Heil Proset and K2? 73, Bryan VE6HBS __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft

[Elecraft] freq counter probe ?

Thanks for the clarification guys, The probe is about to be removed from my K2/10 to be "stored" elsewhere until needed! 73, Bryan VE6HBS __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft

[Elecraft] freq counter probe ?

So, apparantly I should remove the probe from my K2/10 for normal operation ??? The manual is clear that it should be replaced after installing the KSB2. What's the recommendation here? 73, Bryan VE6HBS __ Elecraft mailing list

[Elecraft] Input to K2

I've just finished, calibrated and installed the KSB2 in my K2. My question is, can I have both the key jack and the mic plug in at the same time without frying something? (Assuming my key and mic are not activated at the same time!) 73, Bryan V

[Elecraft] K2 / Buddistick Tuning

enna tuner. Can anyone clarify the correct procedure, given that the first recommended method didn't work but the second seems to have? 73, Bryan VE6HBS __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/el

[Elecraft] K3 High Current Warning on 10m

and for as long as I like and nothing bad happens. Rig indicates a low and stable SWR putting out 100W. This seems to suggest something related to the K3. Has anyone else experienced this? Bryan, ZL1NI __ Elecraft mailing list Home

[Elecraft] no led on rf out put

Have no led's on transmit on 100 watts an only one after pa is off , also just 15 amp draw on 20m to 10m , full 20 amp draw on 40m to 160m 0n dumpy load , kta100 locks up on dumpy load what's up with this also there was some close by lighting hits the other night?  __

elecraft@mailman.qth.net

Look at the seller "radiomart" this guy has problem with telling the true about the things that he sells. message39. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mm

Re: [Elecraft] Man Hospitalized

I Enjoyed that. (Maybe you should consider giving up the day job.) Bryan, Zl1NI > -Original Message- > From: elecraft-boun...@mailman.qth.net [mailto:elecraft- > boun...@mailman.qth.net] On Behalf Of Al Lorona > > MAN HOSPITALIZED WITH ANXIETY

Re: [Elecraft] K3 needs survey -- firmware and application software

Yes! I don't use the K3 internal keyer for exactly that reason. Bryan, Zl1NI > .. > The K3 built-in keyer is very good as it is, but I miss the > automatic > character spacing of my favorite external keyers (CMOS Super Keyer, > Logikey

Re: [Elecraft] Spurious

I do, all the time. I would be surprised if I was the only K3 owner that does. Bryan, Zl1NI > > I mean, who uses the built in speaker anyway. > > phil, K7PEH __ Elecraft mailing list Home: http://mai

Re: [Elecraft] Noisy K3 receiver

factory defaults. This is true for the several other late model rigs of different makes I own and operate. I find the K3 very noisy and fatiguing in comparison to any of the other rigs I have when tuning around a relatively quite band. I Rarely use the preamp mostly have the attenuator in. Bryan, Zl1NI

Re: [Elecraft] K3 Rev C DSP with Low Freq Enhancement ship date info; New swap out option on parts order page. CORRECTION

I am confused about the Rev C DSP board. Is there more to it than the extended low end audio frequency response h/w enhancement? If so can someone point me to where I can see more information please? Bryan, Zl1NI Eric wrote: .. > Any K3 DSP board

Re: [Elecraft] Need K3 firmware testers (extended AF bass, "live" memory recall, flat data-mode EQ, etc.)

Was the root cause for the reported audio blasts found? Bryan, Zl1NI > > Hi all, > > We're getting very close to a long-awaited K3 beta firmware release. > Since the changes are extensive, we'd like to send the code to a new > group of "pre-testers" in

[Elecraft] FW: K3 firmware preview: Much-improved receive AF bassresponse

Thanks for all the helpful responses to this. I am running Rev. 2.78 here. It is good to know, given the way I operate, there will be no difference should I upgrade to an official release in the future that has the better bass response. Bryan, Zl1NI > > Will this be optional? > Per

Re: [Elecraft] K3 firmware preview: Much-improved receive AF bassresponse

Will this be optional? Personally I don't want it. I have impaired hearing and bass response seriously degrades intelligibility for me. Bryan, Zl1NI > > The next K3 beta firmware release will include dramatically better > bass response in receive mode (50-200 Hz). The result is fu

Re: [Elecraft] Some P3 Details

Does anyone know of a Dummies Guide to Panadaptors that covers: What is a Panadaptor? What is it used for? Why a ham might want one? Bryan, Zl1NI __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft

Re: [Elecraft] KPA-800 & KPA 1500

I have the 1.5FX, indeed an excellent companion to the K3, and the physical interface is made to measure. Bryan, Zl1NI > > > With the exception of 6m, you have essentially that capability > available in > the Tokyo Hy-Power HL-2.5KFX which, thanks to Elecraft's loan of a >

Re: [Elecraft] L1 vs W1 Power Reading

Thanks Don. The only calibration I did for the W1 was the procedure in the manual. Bryan, Zl1NI > Brian, > > Unless you used a very accurate wattmeter to calibrate the W1, I > would > believe the DL1. > HOWEVER: The formula in the DL1 manual is not correct. 8.97 volts &

Re: [Elecraft] Keeping Powerpoles Together

Has anyone found a practical way to secure the Powerpole connection to the K3? I manage to dislodge mine all too frequently. Bryan, Zl1NI __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http

Re: [Elecraft] My K3's hissy and noisy audio

Using Heil ProSet here and very satisfied with the K3's audio for communications use. Bryan, Zl1NI > > On the other hand, plug a Heil ProSet with its 200 Ohm elements > into an unmodified K3 and the -3dB point is 80 Hz ... low enough > for communications use without being ov

[Elecraft] Some Info Please

Name is Bryan,I have Just joined the mailing list. Just wanted some info on the K1. Is this difficult to build. I am not an experience builder. But have built some kits in the past. NOT LIKE THIS ONE, What test gear do I need.Merry Christmas to all

[Elecraft] k2/100

I have question about the filters when I change from fl2.2 on 14321.15 an switch to fl 1.60 to tune the voice I have to change vfo to 14320.30. I traded a kenwood ts 2000 straight across for k2/100 with all the bells&whisles Is something wrong with the rig ? Also it didn't come with any of the p

[Elecraft]Import duties on amateur items

Ken, Yes they are duty free, however 17.5% VAT is charge on the value plus shipping in the UK 73 Bryan GM3AKF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub

Re:[Elecraft]K3:7.2 pound tuning knob

Using HRD and a PC you can directly select bands, and many other functions. Simon hasn't gotten around to adding 6m to the list, but then he is a very busy man 73 Bryan GM3AKF K3 s/n 0181 ___ Elecraft mailing list Post to: Elecraft@mailman.qt

Re:[Elecraft]K3 SSB Operation Question

Hi Tom, and Buck, If all else fails, read the manual ! I'll try and remember that, thanks 73 Bryan GM3AKF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change

Re:[Elecraft]IK3 SSB Operation Question

Hi Don, Where do you get FP.Lbias from ? I only see three settings in MIC SEL, none of them show FP.Lbias. 73 Bryan GM3AKF K3 s/n 0181 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list

[Elecraft]K3 SSB Operation Queston

worked ok. Hope this helps. 73 Bryan GM3AKF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help

Re:[Elecraft]KUSB

Dick, I am sure you are right about the PCI card. But you did say earlier that you used the KUSB ok with Vista. I am not able to get to the situation where a driver is available via Windows Update 73 Bryan GM3AKF ___ Elecraft mailing list Post to

Re:[Elecraft]KUSB

Don, My Vista pc is a desktop, however the KUSB works fine on my other pc which is using XP. My concern is that the instructions with the KUSB includes Vista as being ok. 73 Bryan GM3AKF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net

Re:[elecraft]KUSB to serial

It says in the prolific website that "Prolific will not be providing Vista drivers for end users. Please contact the vendor ... etc. I want to use KUSB with a Vista pc. What do I do Elecraft ! 73 Bryan GM3AKF ___ Elecraft mailing list Po

RE;[elecraft]KUSB

This device works ok with WIN-XP but is reported as incompatible with VISTA Home premium. Has anyone else noted this problem ? 73Bryan GM3AKF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list

[Elecraft]K3 XMIT in SSB modes

The Heil desk mike has always been that way. Pushing XMIT toggles TX on and off on my K3 s/n 181, always has 73 Bryan GM3AKF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info

Re:[elecraft]No messages

Hi Messages back for last 10 mins Thanks 73 Bryan GM3AKF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman

Re:[Elecraft]No messages

Hi I have received no messages on here since 1522 utc on the 26th. All others seem ok 73 Bryan GM3AKF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub

[Elecraft] Re:K3 S-meter calibration

off, using my XG1. I seem to have been puzzled when I built my K2, s/n 4421 as well. Whats the correct method ? 73 Bryan GM3AKF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info

[elecraft]K3 0181 err TXF

Can someone help please ? I get this error message when I go to xmit-tune. I am sure there has been an answer on here, but I can't find it 73 Bryan GM3AKF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to po

[Elecraft] Re:Nil received past 15 hours

Must have been a hitch somewhere, postings ok since 1603 utc 73 Bryan GM3AKF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http

Re:[elecraft]Nil received past 15 hours

Nil received on here for past 15 hours, whereas I get other e-mails ok. Is the trouble my end ? 73 Bryan GM3AKF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change

Re:[elecraft] Eric WA6hhq and shipping status

Hi Eric, I endorse Rob's remarks. Be assured that we aren't all whinging limeys. Keep up the good work I understand your problems with launching a new product 73 Bryan GM3AKF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You

[Elecraft]KAT100 will it work with the K3

Hi Allan, It is not compatibloe with the K3 73 Bryan GM3AKF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman

Re:[Elecraft]K3 Serial number 37

It is Kilometres/k3 serial number 73 Bryan GMK3AKF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo

[Elecraft]K3 missing serial numbers

Hi Rowland, Congrats on sn 036. Can you tell me how much the shipping charge was via UPS ? 73 Bryan GM3AKF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub

Re:[Elecraft]US Postal Service Express Mail to the UK -Rubbish!

Hi, My experience has been that any delay has always been here in the UK, either Customs or ParcelForce. Bryan GM3AKF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr

[Elecraft] Re:Elecraft K2 Two problems

Hi, Both problems resolved, thanks to all who responded, 73 Bryan GM3AKF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net

[Elecraft] Re:Elecraft K2 Two problems

Hi 1. I have lost sidetone. I know there is a simple fix, but I can't remember it 2. Why when I remove the KDSP2 does the audio disappear ? Thanks for your help 73 Bryan GM3AKF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You mu

Re:[Elecraft]K2 Problem and new elecraft,ki.propasal

Hi John He [Sam] has a problem there, I have a K3 on order, maybe that will work, Sam is only twice the weight of the K3. 73 Bryan GM3AKF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list

[Elecraft]K2 Problem and new elecraft.kit.proposal

Dom, My cat keeps them all out 73 Bryan GM3AKF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft

Re:[Elecraft]solution to sliding paddles

Blu-tack works fine Bryan GM3AKF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http

[Elecraft]Elecraft Shipping time to UK

Hi David, Shipping times vary, but Elecraft give you a tracking number that is useful. Usually less than a week in my experience to clear Pacelforce etc. 73 Bryan GM3AKF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a

Re:[elecraft]K3 - Cost of importing into the UK

d buy. 73 Bryan GM3AKF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailm

Re:[elecraft]External reference freq

Hi Wayne, If you use the external 10Mhz signal, does this mean that you don't need the TCXO ? Congrats to the Elecraft crew for a fine job 73 Bryan GM3AKF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscrib

Re:[elecraft]Alignment and Test, part 1

Hi Don, Problem fixed, I had omitted R64..works fine now ! Thanks, 73 Bryan GM3AKF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http

Re:[elecraft] Alignment and test, part 1

ntrol board. Has anyone seen this problem before. 73, Bryan GM3AKF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/ma

Re:[elecraft]135 ft top etc

expensive. 73 Bryan GM3AKF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http

Re:[elecraft]135 ft top etc

mode psu's, and don't cause any tvi/rfi myself. Not the cheapest solution as I say, but solves a lot of problems. ATU's should be close to the antenna, not in the shack or tranceiver. 73 Bryan GM3AKF ___ Elecraft mailing li

Re:[elecraft]cw recognition etc

, practice and yet more practice. I use to spell out in my head anything I saw on a billboard, etc. All it needs is dedication. 73 de Bryan GM3AKF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list

[Elecraft] Re:Elecraft cords

Or was that chords ? Bryan GM3AKF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help

[Elecraft] Re cord etc

Wasn't it Snozzle Durante who found the lost cord ? 73 all de GM3AKF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/

[Elecraft] Location Change

Hi, I have now changed my location to Scotland. My callsign prefix has changed to GM3AKF 73 Bryan GM3AKF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub

Re: [Elecraft] Change of QTH

Hi All, Just to say I've qsyed to Bonny Scotland, and I am now GM3AKF. Hope it won't be too long before I am back on the bands. 73, Bryan GM3AKF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post t

Re[elecraft] K2 current drain

Hi All, Can anyone tell me what your current drain measured by the K2 is when you press "Tune" Thanks Bryan G3AKF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Ad

Re[elecraft] K2/KPA100 problem

em Thanks 73 Bryan G3AKF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailm

[elecraft]Order your KX1 now

with emergency communication facilities like the KX1 ? 73 Bryan G3AKF (to be GM3AKF after April 7, 2005) ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.):

[Elecraft] Re:Puffing to keeping up with the nF..

I remember the Royal Navy used Jars for condensers Bryan G3AKF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman

Re:[elecraft] K160RX problem

Hi Don Thanks for that. 73 Bryan G3AKF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help

Re[Elecraft]K160RX problem

Hi All Tryng to do 160 Meter Alignment page 9. CALL PLL display shows 06917.1 and then Info 232. Any ideas will be appreciated. 73 Bryan G3AKF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list

Re:[elecraft]K2 sn 4421

Gary, Found the problem. My solid 6A psu was current limiting at 2.5A ! 73 Bryan G3AKF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http

Re:[elecraft] two problems K2 sn 4421

Hi All Have two problems with my new K2 1) Current limit operates at 2.5A where-ever I set the limit 2) Filter 4 always sets at approx 1kHz bandwidth, using Spectrogram. Set up okay initially, but now faulty Grateful for any suggestions 73 Bryan G3AKF

[Elecraft]K2 FM-ing and AM-ing on 80Meters problem solved

Hi Don, Can't find D12 or D14 on the T-R switch. Are these numbers correct ? 73 Bryan G3AKF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.):

Re[elecraft]s/n 4421

Hi Bob, Found the problem, a short on the 5volt line, solder bridge between pin 5v and gnd on the microfone selector Thanks for your assistance. I'll be back no doubt ! 73 Bryan G3AKF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.ne

Re:[Elecraft]K2s/n 4421

Hi Bob, There are no shorts on Q7C or Q8C. Presume you mean page 71 Q7C 5M reducing to 2K. Fixed 265R with DVM leads reversed i.e red lead to GND Q6B 180R Q7B 2K734 U11-8 1K085 U10-8 4k01 U12-1 246R 73 Bryan G3AKF ___ Elecraft mailing list Post

[Elecraft] Re:K2 s/n 4421

have a short on their collectors. Can anyone make some useful suggestions on where I should look ? 73 Bryan G3AKF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub

Re:[elecraft]CRT Images K2

Hi Bob, Sorry my mistake, it's U4 on the control board. I'm on page 63 of the manual though I've done the VFO Linearization ok. I've changed Q9 on the control board, at Gary's suggestion 73 Bryan G3AKF #4421(under construction) ___

Re:[elecraft]CRT Images for K2

Hi Dan Yes my Tektronix 2225 probe is compensated ok. I see different waveforms on U4P15, non of them square. 73 Bryan G3AKF K2 #4421 (under construction) ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to

Re:[Elecraft]CRT Images for K2

ing K2 s/n 4421 73 Bryan G3AKF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://

[Elecraft] Re:CRT Images for K2

Hi All I have seen some scope waveforms somewhere, but can't remember where. Can anyone help ? 73 Bryan G3AKF ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. C

[Elecraft] Re swift delivery

Hi New boy here, ordered k2 last Tuesday afternoon, postman knocked at noon today Friday, with the box. Now I have to clear the bench so I can build #4421. Thanks for a great delivery 73 Bryan G3AKF ___ Elecraft mailing list Post to: Elecraft