Running latest 5.09
When pushing PRE to have it OFF the pre/dial will flash and
preamp is not off. I have to push it twice to have it off.
Is it new? normal?
73, Claude VE2FK
__
Elecraft mailing list
Home:
Irwin, I ran mine at 500W for 20 hrs. 1268 QSO fan speed fixe at 4
and no problem. 60% of the time in RUN/CQ mode.
73, Claude VE2FK
From: KD3TB
Sent: Monday, September 30, 2013 11:35 AM
To: 'Elecraft Reflector'
Subject: [Elecraft] KPA500 in the RTTY Contest
For General Information -
I ran
Are the latest KPA-500 now sent with the POP repaired?
73, Claude VE2FK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This
Pactor is AFSK, hope you are not using FSK mode.
73 and GL
Claude VE2FK
From: ussv dharma
Sent: Thursday, February 17, 2011 12:14 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3/Pactor IIe help
My k3 has worked great, however, now it will not do pactor...it is great on
rtty, cw, ssb,
And have been told the KPA-500 capable of 500w RTTY.
I dont have choice I need one. Dreaming of my next RSGB IOTA
expedition on NA-128
73 de Claude VE2FK
From: Wayne Burdick
Sent: Monday, January 24, 2011 1:04 PM
To: W5UXH
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KPA-500 vs THP
What will be the usable power on RTTY?
73, Claude VE2FK
- Original Message -
From: Dick Dievendorff
To: 'Ron Gould' ; elecraft@mailman.qth.net
Sent: Tuesday, December 21, 2010 10:58 AM
Subject: Re: [Elecraft] New Elecraft Amplifier
Ron:
The KPA500 also requires an
I could not even think to use a FT5K in my RV or portable.
My K3 is just perfect for that.
Are we many using K3 or K2 in RVing?
73 de Claude VE2FK
- Original Message -
From: GREG FICHER
To: Lee Buller
Cc: Elecraft Reflector
Sent: Thursday, December 02, 2010 10:21 AM
Hello group
Is it normal while turning the Main VFO Knob I hear
some noise like friction? no there is not too much friction.
I dont hear such noise on my old IC-746
73, Claude VE2FK
__
Elecraft mailing list
Home:
Bargmann
To: elecraft@mailman.qth.net
Sent: Wednesday, November 24, 2010 3:48 PM
Subject: Re: [Elecraft] K3 VFO converter/Knob
* On 2010 24 Nov 12:37 -0600, Claude Du Berger wrote:
Hello group
Is it normal while turning the Main VFO Knob I hear
some noise like friction
Thanks for your info Erik.
Here, even after removing the knob and felt washer, turning
the shaft with my fingers make the same noise. Maybe I am not lucky
and will have to change the converter ?..
73 de VE2FK
- Original Message -
From: Erik Basilier
To: Elecraft@mailman.qth.net
Hello Group
I want to calibrate my K3, presently about 10Hz off.
I want to use method 2 in page 50
I can not find CONFIG:REF CAL in the menu...
Thanks,
73, Claude VE2FK
K3# 3889
__
Elecraft mailing list
Home:
Great, done, thanks.
73
Claude VE2FK
- Original Message -
From: Don Wilhelm
To: Claude Du Berger
Cc: elecraft@mailman.qth.net
Sent: Monday, November 22, 2010 10:15 AM
Subject: Re: [Elecraft] Ref Osc Calibration
Claude,
Turn TECH MD on in the CONFIG menu first
Thanks Lyle and Joe.
I am all set. Tested this morning with a friend, 75 baud.
400Hz filter plus Dual PB at this end and all was working well
even with low signal in the noise.
73, Claude
- Original Message -
From: Joe Subich, W4TV
To: Claude Du Berger ; Elecraft Reflector
Sent
Hello Group.
June 12 is the Bartg Sprint 75 (test) Contest.
At this speed, what is the best filter to use and can we
still use the so sharp Dual PB?
Claude Du Berger VE2FK
ve...@arrl.net
http://www.contestgroupduquebec.com/
http://sites.google.com/site/va2upcontesting/Home
I am using CW-REV on my K3 with N1MM.
On N1MM: Config/mode Control = Select Use Radio Mode (Default)
73
- Original Message -
From: Rich - K1HTV
To: supp...@elecraft.com
Cc: elecraft@mailman.qth.net
Sent: Thursday, April 29, 2010 5:42 PM
Subject: [Elecraft] CW/CW-REV
I am going to UNSUBCRIBE after sending this message.
Too much Knobs, Junk and Confusion on the Elecraft site.
Sorry guys.
Claude VE2FK K3 # 3889
- Original Message -
From: Terry Schieler
To: 'George Dubovsky' ; leoli...@seidkr.com
Cc: 'Elecraft Reflector'
Sent: Friday,
Yes, Yes, Yes...
73, Claude VE2FK
- Original Message -
From: Craig D. Smith
To: elecraft@mailman.qth.net
Sent: Saturday, April 17, 2010 3:13 PM
Subject: Re: [Elecraft] News from Visalia! (:-))
Only room for so much stuff in a K3 sized box. I like the built-in Power
Lyle, could we use the P3 as a X-Y Scope to monitor RTTY signal
as on MMTTY?
73 de VE2FK
- Original Message -
From: Lyle Johnson
To: elecraft@mailman.qth.net
Sent: Monday, March 29, 2010 2:40 PM
Subject: [Elecraft] P3 and Digital Mode Operation
I've been testing the P3
Yes, and still prefered over waterfall by many RTTY contesters.
73, Claude VE2FK - K3# 3889
- Original Message -
From: Alan Bloom
To: Claude Du Berger
Cc: Lyle Johnson ; elecraft@mailman.qth.net
Sent: Monday, March 29, 2010 7:57 PM
Subject: Re: [Elecraft] P3 and Digital
that in the BARTG contest.
One thing for sure, I could feel the improment using a K3 in RTTY.
Claude Du Berger VE2FK
ve...@arrl.net
http://www.contestgroupduquebec.com/
http://sites.google.com/site/va2upcontesting/Home
- Original Message -
From: r...@aol.com
To: elecraft@mailman.qth.net
Is that Cantennas made by Elecraft?
Do I have to read all this... to get news about K3?
73 de Claude VE2FK
- Original Message -
From: Dave New, N8SBE
To: Jim Wiley
Cc: elecraft@mailman.qth.net
Sent: Tuesday, March 02, 2010 6:15 PM
Subject: Re: [Elecraft] Need to select a
Normally I dont need the DPB.
But when in RUN-CQ mode with QRM in the last NAQP
I was very happy to have it.
73
Claude Du Berger VE2FK
ve...@arrl.net
http://www.contestgroupduquebec.com/
http://sites.google.com/site/va2upcontesting/Home
- Original Message -
From: Dave Hachadorian
Hello Group
I am a new owner of a K3.
I was testing RTTY FSK before WPX and found
that it will only transmit on 10, 20 and 80m.
On other bands only have the red led...
Is there anything I should program?
Thanks
Claude VE2FK
__
Elecraft
Thanks Don and all the group.
Yes I am using FSK with a MK-II.
I had not FSK-D setted on all band. Will remember.
All is working nicely now.
Thanks, 73
Claude VE2FK
ve...@arrl.net
K3 #3889
- Original Message -
From: Don Wilhelm
To: Claude Du Berger
Cc: elecraft
24 matches
Mail list logo