Thanks.
-Original Message-
From: Mark E. Musick [mailto:markmus...@sbcglobal.net]
Sent: Sunday, July 17, 2016 5:58 AM
To: Dick Lindzen; 'Reflector Elecraft'
Subject: RE: [Elecraft] Did calibration
With the firmware upgrade the VFO linking was moved from the sub receiver
button
The power issue was solved with a calibration. Any suggestions for the
inability in link vfo's?
73, Dick, WO1I K3 911
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
I had not updated the firmware on my K3 in a while, so I went to the Elecraft
site, downloaded the new K3 utility, found the new firmware, and proceeded to
download it to the K3. I have suddenly lost the 100 w amp in the K3, and I can
no longer link the two vfo's. I'm not sure what else is
is the cure.
Dave Hachadorian, K6LL
Yuma, AZ
-Original Message-
From: Dick Lindzen
Sent: Tuesday, February 16, 2016 7:45 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Receive drops about 6 s-units
I'm having a problem with my K3 (with 2 receivers and a P3).
While listening for a few
I'm having a problem with my K3 (with 2 receivers and a P3). While listening
for a few minutes, signals drop about 6 s-units. Original strength returns
when I push the PTT, but the drop returns after a minute or two. None of this
impacts transmit. It seems like a bad relay. Has anyone else
There used to be a program that allowed for more convenient adjustment of audio
equalization. Is this still available? Also, can equalization be done
separately for the sub-receiver?
Thanks and 73, Dick WO1I K3#911
__
Elecraft
Try
KLH-970A Indoor/ Outdoor 3-way Speakers at
overstock. They're no longer manufactured, but
typically sell for about $30/pair, and sound just
fine with the K3 -- especially if the equalizer is set to your needs.
73, Dick WO1I K3#911
At 11:55 PM 8/28/2014, Mike Flowers wrote:
Hi Gang,
All these antennas are easy to model with EZNEC. You may find some
of the results surprising.
73, Dick WO1I
At 11:55 PM 10/8/2013, Rick Dettinger wrote:
I scaled the 44 feet up 4 times to 176 feet to get a reasonable
match on 160 meters with my poor ground system.
Its 55 feet high with the
The PC in my shack crashed badly, and I had to start again from
scratch. Does anyone, off hand, know the settings for Ham Radio
Deluxe (5) for controlling the radio in DM780. I receive fine, but I
don't key the K3 when I want to transmit.
Thanks in advance,
73, Dick WO1I
@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Dick Lindzen, WO1I
301 Lake Avenue
Newton, MA 02461 USA
1-617-332-4342
Paris: F4WBK
103 Avenue de la Republique
75011 Paris FRANCE
33 (0)1 43 14 93 79
33 (0)9 63 57 86 75
Are there updates to Fred's book? If so, how does one get them?
73, Dick WO1I
At 04:40 PM 8/8/2012, Thomas Horsten wrote:
Hi Dale,
Sure about the code? I get:
The code you entered is not valid
Tried both upper and lower case. Seems like a dud to me.
73, Thomas M0TRN
On 8 August 2012 18:58,
Ditto for me. The KX3 with a high stability
oscillator would be ideal for JT-65.
73,
Dick
WO1I
At 11:45 AM 7/18/2012, Barry LaZar wrote:
Wayne,
I only use 2 meters as a local intercom. If I want to reach out and
touch people, I use HF. Giving up 2 meters on my KX3 for a high
stability
Do you really mean a 5 power lens? The ones I see listed only go to
2.75 power.
Dick WO1I
At 09:20 PM 4/17/2012, WILLIS COOKE wrote:
Bob, I use an Optovisor with a 5 power lens. I sent my Dad one
about 35 years ago. About 20 years ago I got one for myself. 16
years ago, I inherited my
Slight confusion. But the KX3 sounded great.
Dick WO1I MA K3#911
At 11:13 AM 4/2/2012, Dale Putnam wrote:
With the following checkins and a KX3 to talk to, then another KX3
arrives, to do a KX3 # 5 to KX3 # 24 production board to production
board Q... we had a great net.
Thanks to
What is the URL for Kreiger?
73, Dick WO1I
At 10:34 PM 2/10/2012, Byron Servies wrote:
I have purchased boxes of type 31 from Kreiger. They are fast, and
their web site was recently re-done to be much easier to navigate.
73, Byron N6NUL
On Fri, Feb 10, 2012 at 11:01 AM, Jim Brown
Will the P3 monitor adaptor make it possible to use CW Skimmer
(except in the 3 khz mode)?
73, Dick WO1I
At 04:24 PM 12/28/2011, k...@cox.net wrote:
Eric/Wayne,
Now that the KX-3 has been released to the QRP/trail folks, is the
P3 monitor adaptor still on schedule for ordering sometime later
As a compromise, you might look at some of the larger Tamrac Ultra
Pro bags that hold a huge amount of camera gear plus a laptop
computer. To my surprise, this is always accepted as my personal
effects bag. I can then pack quite a lot of radio gear in my carryon
roller board.
73, Dick
Will one need a dedicated monitor or can it be shared with a pc?
Dick, WO1I
At 02:48 AM 12/16/2011, W0MU Mike Fatchett wrote:
That sounds like K400!
Mike W0MU
W0MU-1 CC Cluster w0mu.net
On 12/15/2011 6:41 PM, DOUGLAS ZWIEBEL wrote:
I trust that the K4 will have the same form factor as
Actually, it seems to me that an antenna tuner is needed because SWR
is high, and if SWR is high, there are extra losses in the
feedline. The lowest cost low loss feeder is open line, and a
balanced input to the tuner would be useful.
Dick, WO1I
At 10:48 PM 12/8/2011, Arie Kleingeld PA3A
I've been having the same problem since getting the P3 and I also use
HRD. I'll try LP-Bridge, but there really ought to be a better solution.
73, Dick WO1I
At 07:38 AM 6/19/2011, Stephen Prior wrote:
Since I stopped using HRD and turned Mac only, I have never once had the AGC
turning off
20 matches
Mail list logo
