Floyd,
I just did some snooping around their site and found this under "contact
us", http://www.unpcbs.com/us/#contact.
Hope you find one. I built my K2 with both the unpcbs Rework Eliminator and
the IMA. Makes life a lot easier.
Gary
On Sun, Jul 26, 2015 at 5:35 AM, Floyd Sense wrote:
> I
Whatever you want. I put in my name and call. It will scroll by when you
turn on the rig.
On Wednesday, May 29, 2013, Russ Pakulski wrote:
> I see Edit Power On Banner, in the configuration menu. What is this banner
> thing going to do? What do I put in it?
> Thanks Russ K9VON KX3 # 4049
>
>
>
I took this opportunity to install ribbons on mine, too. Was certain it was
only a matter of time until I gouged a battery case. I'm also convinced the
problem is more that the screw holes are not countersunk than screw length.
Gary
On Saturday, January 19, 2013, Phil Hystad wrote:
> Rich,
>
> G
,
Gary KJ7RT
Sun City, AZ
Fists #14460 NAQCC #3709
On Thu, Nov 29, 2012 at 2:06 PM, Gary Marklund wrote:
> I just installed the KXBC3 in my KX3 SN 460. The batteries are Sanyo
> Eneloop XX 2400 mAH rechargeable NiMH batteries. I had charged them one
> time before installing on a NiMH
I just installed the KXBC3 in my KX3 SN 460. The batteries are Sanyo
Eneloop XX 2400 mAH rechargeable NiMH batteries. I had charged them one
time before installing on a NiMH specific charger. There was maybe a few
hours of use on them. They were run down to the point where the rig shut
down. As soo
Me too!
Gary KJ7RT
Sent from my iPad
On Aug 12, 2012, at 10:55, "Erik Basilier" wrote:
> I too support the request to add Ultimatic to Elecraft rigs. I don't have
> the fine motor control of my fingers required to make use of iambic
> features. I treat the dual paddles the same as a single pad
3EDP antenna length - as I recall, it is 86 feet
> for the radiator and 17 feet for the counterpoise wire. 80 through 10 meters
> is good, and the KX3 tuner will match it easily.
>
> 73,
> Don W3FPR
>
> On 6/27/2012 7:33 PM, Gary Marklund wrote:
>> I think it was Eric who
I think it was Eric who wrote a bit ago that an 84 foot wire could be matched
on 160 to 10 meters. If I select that length for my KX3 kit, will I need a
separate Counterpoise for each of these bands?
73
Gary
KJ7RT
Sent from my iPad
On Jun 27, 2012, at 13:10, Mike WA8BXN wrote:
> Hi Scott --
Wayne,
How high is that antenna?
73
Gary
KJ7RT
Sent from my iPad
On Apr 17, 2012, at 13:08, Wayne Burdick wrote:
> Hi Ron,
>
> If an SSB station is strong, it's likely they'll hear you with lower
> power. Consider an S-9 SSB signal with low band noise, from a station
> running 100 W. If
I just reported the listing to eBay. Don't expect it to be there long.
73,
Gary KJ7RT
Sun City, AZ
Fists #14460 NAQCC #3709
On Tue, Feb 28, 2012 at 4:10 PM, Robert Dorchuck W6VY wrote:
> Beware of item #170792771430 on eBay. Same old scam of
> contact me direct. It is a K3 (ser 5144), P3 a
Try www.samash.com
They have them for $44.95. Don't know if they ship to the UK. Good company.
I bought my second CM500 from them.
Gary
--
73
KJ7RT
Sent from Gmail iPAD2
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/l
The listings both say the photographs are stock images.
73,
Gary KJ7RT
Sun City, AZ
Fists #14460 NAQCC #3709
On Wed, Nov 9, 2011 at 9:58 PM, Merv Schweigert wrote:
> Looking at Ebay just now and there are two "new" K2 radios,
> both listed with the same serial number and both with almost
>
OOPs, that should have read K60XV.
Gary
KJ7RT
Sun City, AZ
Fists #14460 NAQCC #3709
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth
I have installed the KXV60 into my K2 and am able to receive with it. I have
placed the five 60 meter channels into memory locations 1 through 5. When I
follow the instructions for setting up channel hopping I'm unable to bring
up the channel scan option in the rates parameter of the secondary menu
Thank you for your comments. You have convinced me to go with the RCAs.
73,
Gary
KJ7RT
Sun City, AZ
Fists #14460 NAQCC #3709
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.ne
I am about to install the KXV60 in my K2 (10W) and need to make the
connector decision. My preference would be the BNC connectors, but would
like to know if there are any considerations beyond personal preference.
Thank you,
Gary
KJ7RT
Sun City, AZ
Fists #14460 NAQCC #3709
__
16 matches
Mail list logo