Hi all,
Have just recorded 2 messages using my KX3. Both played back well. However, I
wanted to chain message 1 and 2 but have not been successful. When playing
message 1 in repeat mode and then pressing #2 button the display shows “Chain”
but messages stop altogether.
All help appreciated
Hi all,
Would like to see the addition for (40m and 30m) of APRS and GPS for mobile use
for the KX3 when 2m digipeaters are not reachable.
Gerard VK2JNG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Quote:
Bug reports will get a different response than those requests for
changed operation. If bug reports are proven valid and repeatable, they
will be attended to promptly.
73,
Don W3FPR
Try this. Reported a bug almost 2 years ago. When the charger is operating in
the KX3
Hi all,
First wishing everyone a prosperous 2017.
About 18 months ago I reported a problem to Elecraft.
The problem is that whilst the internal batteries in my KX3 are charging
overnight and at the same time the alarm has been set to turn the radio on the
next morning then the radio will never
Hi all,
Using the Kx3 utility Command tester Revision 1.16.6.25 on my MacBook Pro I
noticed the following:
Issued command PC001; results in 1W
Issued command PC005; results in 5W
Issued command PC010; results in 10W
Issued command PC015; results in 15W
Issued command PC011; ALSO results in 15W.
Hi all,
Just been playing with commands for the KX3 and found that when using the KX3
Utility on my MacBook Pro, that some commands don’t get a return.
For example: PO; always returns P despite that the power has been set at
10W.
There are others as well which do not return anything after
Feature 1 for me. Would be very nice as I use the KX3 from my RV.
Thanks
Gerard VK2JNG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Hi all,
Just started using the scan function. This is what I got in memory location 1,
2 and 3.
1. 7.028
2. 7.032
3. 7.050
These three frequencies I am scanning using RCL, select memory location and
press and hold scan for unmuted that is AF = on.
What I did notice is that the screen on the
Hi all,
I have been asked to give a demo / presentation of the KX3 and PX3 at my local
amateur radio club.
Can anyone perhaps help if they have already done a presentation using Power
Point or a PDF format.
Would really appreciate a copy.
73
Gerard VK2JNG
Hi all,
I would like to create 2 macros which operate as follows:
Macro 1:
Turn power to 10W
Play CW message 1
Macro 2:
Turn power to 1W
Play CW message 2
Setting power is easy with the “PC010; and PC001; command.
However I can’t find a command to play a stored CW message in the KX3.
Anyone?
I was in contact with a CW station recently and his signal had 3 peaks on my
PX3.
Can anyone explain. The other station was using an ICOM 7410.
Submitted this also on the KX3 Yahoo forum and had 1 reply. Thanks for that.
Thought I might post it here in the hope to get an explanation. Have
Hi all,
Just wondering about the accuracy of the CW Words/Minute setting. How accurate
is it?
People tell me that it seems faster then it is set to.
Using the KX3 Utility on a MacBook Pro with all the latest firmware and OS X.
Anyone knows or comments appreciated,
73
Gerard
vk2jng at
Hi all,
First post here.
Can the KX3 RX I/Q output be used with the CW Skimmer program?
Anyone any experience with this…love to hear.
Gerard VK2JNG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
13 matches
Mail list logo