With all the hubub about the new rig I hope someone reads this :-)
I would like to operate 15m but my 4 band K1 is wired for 17m.
Should I build another 4 band module or is there a better or simpler way ?
72 and Thanks,
Jim / W1FMR
__
After changing bands and while adjusting the antenna tuner for a low SWR
the K1 transmit power level may drop to a watt or so.
But the power does not come back after the adjustment is complete.
Then if the K1 is turned off, then back on, the output comes back up
to the original value.
Is t
K3 - UP THE WAZZOO! (Not the Yaesu)
W1FMR
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
One dangerous (electrical) mistake was at 9 years old.
Sent away to Johnson Smith & Co. for plans and parts
to make a
radio the ad said, used no batteries or electrical
power.
It turned out to be a crystal set complete with
cat-whisker, crystal, terminals, coil form, and wire.
I followed the
.
Subject: DMM Minimum Capacitance Measurements ?
To: Elecraft List
Please,
What is the lowest capacitance value you can measure with the popular DMMs ?
(in picoFarads ?) DMM specs do not spell out what the minimum capacitance is..
Jim - W1FMR
.
Best Regards,
Jim
AMERICA;
Hello to all that I worked yesterday in the QRP Afield contest.
The K1 performed flawlessly in the field this Saturday.
The only regret was that 80m was not on the bandswitch.
.
Jim - W1FMR
Best Regards,
Jim
I Don't eat snails...I prefer fast food.
Hi Mike KK5F,
Yes, I copied your message from the K1 archives yesterday, and used it to
further my understanding of how the offset works.
I re-calibrated the VFO frequencies, re-set C13, all at midnight last night
and as I was adjusting my antenna tuner on 20m a station from Seattle was
ca
Nice to be on the list..
..
My K1 - 4 bander has a transmit offset problem(Or I do !)
On transmit the frequency should increase by about +700 Hz.
It decreases about -100Hz on 20m, to about -900Hz on 17m.
Each band is different.
The RIT/XIT function is off, and the knob does not change
8 matches
Mail list logo