Dave,
I have a K3 (#7360) with ATU and 347 ft. long wire 30 ft height. It
tunes up ok but performance is questionable. This same antenna performs
better with my external MFJ tuner.
Larry W7IN
On 10/17/2014 20:45, david beckwith wrote:
Just moved and my K3 needs a new antenna. My only option
K3:7360 P3:3112
Ant1 is a 3 el SteppIR
Ant2 is a 347 ft. longwire
Tuning either antenna through the K3 ATU measures 3:1 or higher on the
K3 display. Bypassing the ATU and using an external SWR meter measures
1.3:1 for the SteppIR after tuning the SDA100.
It used to work great 100% of the
I have a K3 / P3 / SteppIR SDA100. Everything is set to 38400 baud. I
have connected a Y-cable to the RS232 connection on the K3. One side of
the Y is connected to the SteppIR controller with a null modem inserted
(as directed by SteppIR instructions). The other side is connected to
the
can find some help in this similar situation.
http://elecraft.365791.n2.nabble.com/K3-Edgeport-Adapter-with-K3-and-SteppIR-td4819889.html
David K0LUM
On Apr 2, 2014, at 3:52 PM, Larry Gerhardstein w...@montana.com wrote:
I have a K3 / P3 / SteppIR SDA100. Everything is set to 38400 baud. I
the XCVR connection on the P3 and
the RS232 connection on the K3.
73,
Mike K2MK
Larry Gerhardstein wrote
I have a K3 / P3 / SteppIR SDA100. Everything is set to 38400 baud. I
have connected a Y-cable to the RS232 connection on the K3. One side of
the Y is connected to the SteppIR controller
I am having difficulty meshing the SVGA board to the I/O board. Any
suggestions?
73, Larry W7IN
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Correction, meant to say the P3 I/O and SVGA boards. Sorry
On 3/30/2014 20:05, Larry Gerhardstein wrote:
I am having difficulty meshing the SVGA board to the I/O board. Any
suggestions?
73, Larry W7IN
__
Elecraft mailing list
Please disregard post. I finally got the boards to fully mesh. Tnx
73 all, Larry W7IN
On 3/30/2014 20:10, Larry Gerhardstein wrote:
Correction, meant to say the P3 I/O and SVGA boards. Sorry
On 3/30/2014 20:05, Larry Gerhardstein wrote:
I am having difficulty meshing the SVGA board
8 matches
Mail list logo