[Elecraft] P3 Panadapter Cable Connections

Gentlemen: I recently purchased a P3 and connected it to my K3. The installation shares the RS232 connection with a Microham USB interface III for digital operation. I used a Y cable to connect both of these units simultaneously. I find I cannot run both at the same time. If I do, the P3 doe

[Elecraft] Elecraft part KXV3 A or B?

Does anyone have an extra part number KXV3 A or B? I am upgrading my K3 transceiver and could use one of these parts. Thank you for your response. Michael Smith K0CCM __ Elecraft mailing list Home: http://mailman.qth.net/mailman

Re: [Elecraft] K-3 goes into bypass on 6 meters

; the PA Amp temp menu does not show overheating on the unit. I am driving the KPA-500 with 20 watts or less input. Even with the duty cycle, I don't see that causing any over-heating. Baldeagle 535 Michael Smith __ Elecraft ma

[Elecraft] K-3 goes into bypass

This condition has been seen on my K-3 when operating on 6 meters in FT8 mode. The K-3 will run for about 45-60 minutes in continuous contact mode, then all of a sudden will shutdown and only transmit 5 watts to the KPA500 amp.The PA temp menu shows the amp at 35 degrees C. The FT8 mode us