Re: [Elecraft] elecraft K3/100 F/S in Germany /Europe: SOLD

Hi, my elecraft K3 is sold. Thank you for all your requests. vy 73, Michael, DC0ZO > Hi, > my elecraft K3 Serial number 61xx is for sale. It has the following > configuration KPA100, KAT3, P3, KBPF-3, KXV3A, KFL3A-2.8k, KFL3A-6k. This > Radio is from December 2011 and comes from a NON smoker sh

[Elecraft] elecraft K3/100 F/S in Germany /Europe

Hi, my elecraft K3 Serial number 61xx is for sale. It has the following configuration KPA100, KAT3, P3, KBPF-3, KXV3A, KFL3A-2.8k, KFL3A-6k. This Radio is from December 2011 and comes from a NON smoker shack. Price is Euro 3.200,-- plus shipping __

[Elecraft] testmail only! please delete

>From dc0zo __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help supp

[Elecraft] K3 #6118 ist on air!

Since this morning 1/1/2012, K3 #6118 is on air in Germany. Happy new K3 and a happy new Year to all! vy 73 de DC0ZO, Michael __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmf

[Elecraft] FS :elecraft K2 with KPA100 and KAT100 in EC2

Complete Elecraft Radio Station including: Elecraft K2/ SN 5348 including KSB2, KNB2, KDSP2, K160m, KIO, K2BAT, K2ATU for use as a QRP station -- and-- the KPA100 and the KAT100 are in a separate EC2 case. So you can easily upgrade to 100W by connecting the K2 to the EC2 box including the 100W amp

[Elecraft] FS: elecraft XG2 SOLD!

Thank you. Item is sold I too have an XG2 that is surplus to my needs. I will ship in Germany for Euro 50,00 plus 7.00 shipping. Paypal is fine for payment.Shipping to other countries on request. If interested please correspond via qrz.com email address. Thanks in advance, Michael DC0ZO ___

[Elecraft] FS: elecraft XG2

I too have an XG2 that is surplus to my needs. I will ship in Germany for Euro 50,00 plus 7.00 shipping. Paypal is fine for payment.Shipping to other countries on request. If interested please correspond via qrz.com email address. Thanks in advance, Michael DC0ZO ___

[Elecraft] K2 screen saver

Hi, i would like to download a K2 screensaver for my new PC. But the link on the elecraft webpage does not work. Any ideas where i can download the K2 screensaver? vy 73, Michael, DC0ZO __ Elecraft mailing list Home: http://mailman.qth.

[Elecraft] K2 KPA100 Adjusting R26 and R27

Hi elecrafters i am building up my 2nd KPA100 and i got some problems when i had to adjust R26 and R27 to 43 ohms.(see page 48 ). in the manual This was not possible. I could only reach 38 ohms. Adjusting the swr in the next step was no problem and i could easily reach 1.0 to 1. Is there a probl

Re: [Elecraft] Using the P3 jumpy when tuning

a good solution (for me ) could be to freeze the averaged signal for the seconds of tuning and moving the frozen signal on the screen. So you could see moving your determined signal to the filter section. 73, Michael Am 28.12.2010 um 18:23 schrieb Guy Olinger K2AV: > Averaging is clunky when

[Elecraft] WTB: K2 with KPA100/KAT100

Hi elecrafters, im looking for a K2 QRP version and additional KPA100 / KAT100 in an EC2. Serial number of the K2 should be >5000. Offers from Europe preferred. vy 73, Michael, DC0ZO __ Elecraft mailing list Home: http://mailman.qth.net

[Elecraft] P3 Relay clicking , diplayed curve while tuning

Hello elecrafters, my new P3 works fine. Very often i hear a relay clicking inside the P3. Is there anything not adjusted? Is it possible to stabilize the displayed signal curve during tuning? During Tuning the display shows like average is set to the lowest level. I'am not abel to detect signal

[Elecraft] P3 feature wish list: Decoded morse code displayed on P3

it would be a great advantage to show decoded CW and Rtty text on the P3 display instead of the very small K3. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

[Elecraft] K3: keyboard problems

Hi Elecrafters, my new K3 #4739 is ready and works fine. Only one problem is the band switch. Switching the bands up by pressing the right side of the bandswitch works very well. But for switching the bands down you need a lot of pressure, so much that the K3 moves backwards on the table. Any so

[Elecraft] ( K2 ) FS K2dsp

Hi elecrafters, i have for sale a Elecraft K2DSP module. 100% ok and ready for use. It comes with manual, standoff and screw. The only missing parts are the 3-pin and the 2-pin connectors. Firmware is the latest version. 150,00 Euro inclusive shipping to European locations. For Non-EU please ask

[Elecraft] ( K2 ) K2dsp for sale in Europe

Hi elecrafters, i have for sale a Elecraft K2DSP module. 100% ok and ready for use. It comes with manual, standoff and screw. The only missing parts are the 3-pin and the 2-pin connectors. Firmware is the latest version. 160,00 Euro inclusive shipping to European locations. I accept paypal. vy 7

[Elecraft] [K2] has the k2 a future?

Dear elecraft -team, during the last 2 years all new modules and software updates had been designed for the K3. Is the K2 out of the focus or is there a chance for all the K2 users to get new modules and upgrades in the future ? vy 73 Michael, DC0ZO __

[Elecraft] K2 Ripple in SSB Filter

Hello elecrafters, after rechecking all my filters with sprectrogram, i noticed that there is a ripple of about 10 db in all SSB filter settings without the OP1 settings. Is this normal for this kind of filters. Is it possible to reduce the ripple? vy 73 Michael, DC0ZO k2# 6614, k3#1999 __

[Elecraft] Fw: V. 3.25 Firmware - Noise Reduction

Yes, the new software is a real improvement. Lyle, please make this mod availiable to the KDSP2, which is miles away from K3 DSP. Michael, DC0ZO - Original Message - From: "Roy Morris" To: Sent: Thursday, August 13, 2009 5:16 AM Subject: [Elecraft] V. 3.25 Firmware - Noise Reduction

Re: [Elecraft] LP PAN

Perhaps elecraft is developing its own pandapter for the K3? This will bring the K3 in front of IC-7800 and the SDRs - Original Message - From: "N1IX" To: Sent: Wednesday, July 22, 2009 7:20 AM Subject: [Elecraft] LP PAN >I have noticed a lot of LP Panadaapters for sale. I am wonde

[Elecraft] K2: Q6 very hot in TX without mod, Normal?

Hi, today i did a recalibration of my K2. I recognized, that Q6 became very hot after a short time pressing TX at the mic in SSB mode, even without modulation. All voltages at the related transistors are equal to the manual. The current goes from 300mA in RX to 680mA in TX without mod. Any idea

[Elecraft] K1 actual serial number critical when buying a used k1

hello folks, i plan to buy a used k1. Are there some main revisisons or changes on the mainbord or firmware? is there a difference between older and newer serial numbers? what is the actual serial number rangeß withe the K2 we have actually the range 67xx. 73 de DC0ZO, Michael

Re: [Elecraft] Sneak Preview: New Elecraft products

To Wayne Yes, i agree with Jan. All that information we need asap. HAMRADIO fair is in June and all suppliers will have special offers. Michael, DC0ZO - Original Message - From: "SM6TUW" To: Sent: Tuesday, May 19, 2009 9:07 AM Subject: Re: [Elecraft] Sneak Preview: New Elecraft produ

[Elecraft] K2: firmware mix?

Hello guys, is it possible to install a KAT2 with older firmware 1.06 (actual is 1.07) into a new k2 with firmware 2.04? Are there any problems comming up? Also i can get a KDSP2 with 3.0 (actual is 3.1). Where is the differece ? I did'nt find any firmare revisison tables in the net or on the

[Elecraft] K2: Sound when switching off k2 after installing KIO2

I installed a KIO in my new k2. All works well, all tests with the KIO installed passed without any problem. But: everytime when switching off the K2 i hear a short sound (sounds like "tscherp") in the speaker. With KIO removed, there is only a short klick at power down. Is there a problem or i

[Elecraft] K2: AGC Problem

With my new K2 i have a strange AGC behavior. I cannot detect a difference between AGC on and off. The voltage at pin 5 U2 is exactly 3.8v after changing the 8V regulator to a better one. All my earlier k2's had a large increase in AF when switching off AGC. I possibly made a short between pin

Re: [Elecraft] K2 vs K3 ?

yes guys, the K3 is a great rigg, with all the features we knew from oher great riggs. But the K2 is classic and puristic. It is the same when you compare motorbikes: the K3 is like a Honda Goldwing and the K2 is like a older Harley. I for myself prefer riding a old Harley. I built 4 K2's and so

[Elecraft] K3: Problem with KPA3 #1999

Hi Folks, thank you for all your help. Gary adviced me to check all the toroids. L6 on KPA3 had a bad solder point. The enamel was not in contact wit the board. After soldering this,the rigg works with more than 100W. 73 de DC0ZO Michael___ Elecraft mai

[Elecraft] K3:Problem with KPA3

hi Folks, my K3 works fine in the Low power mode. But when setting power to more than 12W, i hear the relay switching but i get no output power, the dc power goes to 20A What happens? In the menue, KPA3 is set to nor. Do i have a short in the KPA3 or ist the problem a Menue setting? Thanks for

[Elecraft] K3 #1999

K3 #1999 arrived in Germany. Shipped October 20, arrived October 22 Where is K3 #2000 ? 73 de DC0ZO Michael___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub

[Elecraft] K3 configuration question

Hello elecrafters, i ordered a K3 with the additional KBPF3 module for general Coverage. Do i need the additional AM Filter for listening to AM radiostations? or ist this AM Filter only neccessary for AM TX? Thanks for your configuration support. Michael, DC0ZO K2# 5619

[Elecraft] K2 Transmit problem

Hello, doing the 40m transmitter alignment, i saw that my new K2 (#6454) has no rf out and Q6 becomes hot. The built in meter goes to 0.1 W. I checked and rewound T2 and T3 but there is no other result, The problem exists on all bands. With the power setting at 2 Watt, power consumptio

[Elecraft] KPA100 Output not adjustable

Hi elecrafters, since this morning i have a problem with my KPA100. I cannot adjust t rf output. In the high mode, i always have more than 100W with a dummy load. In QRP mode, i can adjust .5 to 10w. When i reach the 10w, the power goes directly (jumps) to the maximum power of about 100w.

[Elecraft] K2 Filter Abnormality :Alignment with Spectrogram

When doing the filter alignment with spectrogram i see a filtercurve going up to -30db for approx 5 seconds. Then the signal goes down to -40db. Alway when switching to another band or to another mode this happens. This effect is independent from the operation mode (LSB, USB, CW). First t

[Elecraft] (K2) PROBLEM WITH SSB

Dear all, currently i work on my third K2 #5619. I have problems with the KSB2 after the ssb mod: The modulation is bad and it sounds as if there is RF in the microphone line (the voice sounds modulated in it self). I use a dynamic peiker mike and i have tested some other dynamic mics (

[Elecraft] k2/100 for 380 Euros on ebay?

hi guys, i believe that this offer is a fake from China. Please look for the votings before you give your offer. http://cgi.ebay.de/Elecraft-K2-Tranceiver_W0QQitemZ320017226999QQihZ011QQcategoryZ177QQssPageNameZWD2VQQrdZ1QQcmdZViewItem or item-nr. 320017226999 Michael, DC0ZO K2 #4691 _

[Elecraft] Speech-extractor inside K2?

Hallo all, is it possible to bring this powerfull speech-extractor into the k2 and control it with the function-keys PF1 or PF2 ? Thanks for anwers. This is the link to the speech-extractor: http://home2.vr-web.de/~michels/speech_extracter.htm Michael, DC0ZO K2 #4691 ___

[Elecraft] Birdies on 20m

Hello all, my new k2 (4691)is ready and i had some qso,s with it. I have some birdies on the 20m-band, at 14030, 14151, 14211, 14272 and a very strong with s6 at 14363 . What is to do, to avoid them or to bring them in a range " out of band"? Thanks for your ideas! Michael, DC0ZO _

[Elecraft] AGC-Preset

Dear All, Page 47 in the (error) manual says: Adjust R1 on the control-board to 3.8 V. I can only reach 3.6V at pin 1 of U2 ( R1 is fully turned counter clockwise). With no signal at the antenna (IF-Gain MAX) i have 3.58 V at pin 1 of U2. With iF-Gain at MIN i have the 4.6V. This seems ok. But the

[Elecraft] Alignment an Test Part2 problem with PLL reference

Hello togehter, today i run into a problem with K2 #4691. When running CAL FCTR to align the 4 MHZ i always get a frequency reading of about 12014 instead of 12090. In the next step, the pll-range is only 9.04 mhz. What could be wrong? Is this a problem with X1? Thank you for your help. Michael, D

[Elecraft] AGC-function

Hello, after some tuning my k2 works very well. I do not know when i shall use AGC LOW and when the position FAST. Can anyone give me a lection? Thanks Michael, DC0ZO K2#3607 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a su

[Elecraft] SSB-TX-Signal is too bassy

Hi, my SSB signal is a little bit too bassy after i have modified my ssb-modul from 2.0 to 2.5khz. The filter setting for TRX is OP1 in receive mode with lsb and seems with spectrogram full in range between 0.2 and 2.5khz. What is to adjust? tnx for your help Michael, DC0ZO

[Elecraft] KPA100 +Kat100 in a EC2 enclosure

dear all, i plan to built up a 2nd box for the KAT100 and the KPA100 in the same case. So i can use the k2 for qrp or togehter with the power-box for high-power. what is to order? one EC2, one KPA100, one KAT100-2? do I need a 2 nd KIO or ist the one which comes with the KPA100 enough? Where can