I was thinking to plug in a USB powered WiFi bridge into the back of my
K4D. The unit requires 1Amp. How much 5v current can the K4 USB ports
supply? I couldn't seem to find that in the documentation.
__
Elecraft mailing list
Home:
When I got my K4D a month ago, I unplugged my Yamaha CM-500 mic and
headphones from my K3, and plugged them into the back of my K4. I set the
mic input to rear, and mic bias on. I expected the mic to perform
like it had in the K3.
I attempted to get 3-5 bars of ALC by turning up the mic gain
I always use a headset with my K3 at home. I have the Mon level at 1 or 2
so I can hear the DVR output.
As I'm preparing for Field day, I remembered last year we tried to use the
DVR while running external powered speakers on the K3. Unless the Mon
level was turned down to 0, we would get audio
Normal Operation. See note on page 11. This one got me too, Tom. The
KAT500 must be powered up first, then the K3.
Oscar, WB5GCX
On Tue, Jan 29, 2013 at 10:41 AM, Thomas Lindner dl2...@t-online.de wrote:
Hi,
my KAT500 works fine without any problems. It is connected to the K3 via
the
Was just thinking similar thoughts: KAT500 on top makes the k-line
non-symetrical in height. Another KAT500 sized box would even it up. I was
wondering about such a box with a set of good quality speakers (for
stereo).
Of course, this then begs the question of what to stack on top of the P3 :)
Well, maybe some KX3s react a bit differently. I, also, noticed the
phenomenon Jim described. With the KX3, and either the MH3 or my Yamaha
CM500 I couldn't seem to talk at a volume to get 5 bars ALC (or 4, or 3) by
raising and lowing my voice volume level even with mic gain up near 40 (and
comp
Bob,
Not sure why you'd need a boost regulator. The K3 is one of the very few
HF transceivers that specifies it will work fine down to 11v. I've used
mine for years from a 12v SLA with no problems at all. Use 100AH
SLA(wheelchair battery) at home (use Powergate to charge/control voltage),
so
Paul,
The fix works great on my 27 Asus VK728Q monitor. Works fine in both
full screen and picture in picture. Prior to this, I was having to use
1440 x 900. Good work!
The only slight complaint I have is waterfall part of the display on the
large monitor. The waterfall
I occasionally take my K3 portable and operate on 12v battery power (no
computer or monitor). I was also planning to sometimes take my P3. After
I install my P3SVGA board, will my P3 battery current usage go up at all
times, or can the P3SVGA be disabled/turned off, so the P3 has only the
older,
The plug that comes on the microphone works just fine on the rear K3 plug.
Plug and play...
Oscar, WB5GCX
On Thu, Feb 16, 2012 at 1:24 PM, Keith Hamilton tu...@zoominternet.netwrote:
Just one thing I wanted to check on. The microphone plug on the
CM500 is a stereo 1/8 plug. The mic-in jack
Although I'm not very good with antenna theory, I've enjoyed reading the
discussions of where what type balun should go, or not go, etc. in the
KAT500 discussions. I still don't know how I would go about connecting my
current antenna to a KPA500, so I thought perhaps some of you would have
some
I'm wondering if the unit will offer all features remotely (far end of 100'
coax) if I can enclose it in something weatherproof. Will it require
additional power/control cable(s)?
thanks,
Oscar, WB5GCX
On Mon, Aug 29, 2011 at 7:14 PM, Wayne Burdick n...@elecraft.com wrote:
There's serious
Good summary, Jeff.
I'd like to also emphasize that there are a good number of us out here with
deed restriction/covenant situations that have to use a single HF antenna
(175' inverted L here) with an external, outdoor tuner. We are all waiting
for an external option or version of the KAT-500.
Rose,
I'll buy one when I get the amp. However, because my SGC-230 autotuner
can't handle the power, I probably won't buy the amp until Elecraft releases
the new autotuner and I have one of those.
Oscar, WB5GCX
On Thu, Mar 3, 2011 at 11:26 AM, Rose elecraftcov...@gmail.com wrote:
I'm about
When P3 is turned off, I start the K3 Utility, and I will see my text decode
data (both CW and PSK) in the VFO B window, and in the K3 Utility Terminal
window. However, when the P3 is turned on, the data is still shown in the
VFO B window, but does not show up on the K3 Utility Terminal screen.
Posting for a friend (Sam, W5CU) who's at work right now. New, factory
built K3 - about a week old. Situation description:
--
I was running a CW net tonight and experienced two separate incidences of
the power going from the normal 100w down to 10w. In both cases, I turned
the radio
This might work for you: You can set the TUNE function to always work at a
separate fixed power level (I use 8 watts) that is not dependent on what
power level you have dialed in for normal ops. Configuration Menu: TUN PWR
Page 60 in my user manual.
This is perfect to let my antenna
Probably lots of them out there. One very nice package (if you're a Mac
person) is MacloggerDX. Not only does it show the station on a map, but
will turn your beam to the correct heading, etc.
http://www.dogparksoftware.com/MacLoggerDX.html
Oscar
On Mon, Jun 8, 2009 at 8:08 PM, dw
Maybe I'm being a little paranoid, but since everything else in the
instructions is SO precise, I wanted to ensure a slight part variation was
intended. - L9 (4.7uH) is specified as a micro size -- the smaller size -
in both the instruction text (page 31) and the parts inventory
- The only
19 matches
Mail list logo
