Re: [Elecraft] K3/0 Remote setup and Brainboxes

Thanks for your information, John. This morning I went on the Brainboxes web site and took advantage of their support page. All is set up and fine now. 73, Paul K9NU __ Elecraft mailing list Home:

[Elecraft] K3/0 Remote setup and Brainboxes

As part of my remote setup, I purchased a Brainboxes ES-257 2 Port RS232 ethernet to serial adapter to control a couple of serial port accessories. I can control the ES-257 and the attached equipment using their Boost.LAN Manager software over my LAN but cannot get the device configured to accept

[Elecraft] K3/0 local site software

Prior to purchasing a K3/0 with the remote rig boxes, I had been using HRD. My accessory equipment (Alpha 87A, 2 rotor controllers, power meter, etc.) were handled by using the HRD Serial Port Client in conjunction with the 3rd party N8VB vCOM Virtual Serial Port Driver software. Unfortunately,

[Elecraft] K3/0 tx audio problem

Hi Doug, Just wanted to let you know that I'm up and running. I called Elecraft on Monday and Brandon helped me. What a pleasure to work with the Elecraft staff. Main problem was that I need to remove JMP1 (default is bias on) in the control RRC-1258. I did not realize that some mics that don't

[Elecraft] K3/0 tx audio problem

Just received my K3/0 and in the process of setting it up. RX, dual RX and CW are working great. I can't get any audio on SSB. I have the remote (K3/100) MIC SEL set to rP.L and the local K3/0 MIC SET set to fP.L . The mic plugged into the front connector of the K3/0. PTT is working but no ALC

Re: [Elecraft] RS-232 over WiFi

I purchased a refurbished NETGEAR WNCE2001-100NAR from Newegg.com. Works great. 73, Paul K9NU __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

[Elecraft] P3 -P3SVGA Split Op Problem

This is probably a cockpit problem. All is just fine I set up for split operation (TX on VFO B and set the span for a desired width) and press and hold center and adjust the center so that the VFO A cursor is on the far left on both displays. If I happen to bump or make a fine adjustment to VFO

[Elecraft] K3 default RTTY baud rate

What am I doing wrong? I use FSK D and it seems like the default baud rate is 75 bps when I check the setting in MD DATA. How can I set the K3 up so 45 bps is the default? 73, Paul K9NU __ Elecraft mailing list Home:

Re: [Elecraft] K3 - Help Needed in Chicago Area

Chuck, Let me know if you need any help. I'm in Somonauk but I get over to Joliet at least once a week. 73, Paul K9NU __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: