My K3 does this sort of unexpected leap to next band up/down at tuning
breaks with linked or unlinked main/sub. I assumed this was because I
had the general coverage filter in the main but not the sub. Firmware 2.82.
No 'zipper' noise here except that little bit at the bottom end of 6m.
73
Joe Subich, W4TV wrote:
Absolutely not! When conventional rigs are generating ALC
their final amplifiers are ALREADY in compression and they
are generating IMD in the PSK31 signal.
A bit sweeping, Joe. Surely any sane engineer would put the onset of
system ALC at a level *before* the
Joe Subich, W4TV wrote:
If you want to be able to click to tune
without manually adjusting power levels get a Flex-5000 or
a transmitter that uses on frequency RF generation.
Would a possible solution be 'split' operation using VFOA to 'read' an
ssb passband via the sound card while
Don Nesbitt wrote:
I’ve posted a few photos of the modifications that I made at the same
time I installed the KDVR3.
Thank you, Don. I'm about to do the same on #900 and those pics are a
great help.
Pete, F5VNB
___
Elecraft mailing list
Post to:
That's the right site. Try 'Support', 'X-keys Support' and then 'X-keys
Macroworks II (for PC)' for lots of information. The Mac link probably
does the same, in pastel colours ;-)
These look to be useful units but it seems to me that all they do is
generate macros that can be programmed into
Joe
Thank you for pointing out the difficulties in setting average power
across a range of modulation types.
Whatever the peak/average ratio of the modulation, the output power from
the PA is peak limited - so wouldn't the answer be a K3 power meter and
power control that shows/sets peak
David Ferrington, M0XDF wrote:
Could someone enlighten me as to what a 'grader' is please?
Googling it gave me a selection of photographs. Wonderful thing, this
internet ;-)
73, Pete F5VNB
___
Elecraft mailing list
Post to:
Just received notification of KDVR3 shipping for K3 #900 ordered 26 Nov
2007.
Pete Connors F5VNB/G4PLZ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub
Down the years I have found that flashing a new BIOS on computer
motherboards can also occasionally generate a surprise change or two.
Why this should be I have never discovered but, eg, having your boot
media priority changed can cause a distraught hour or two for the unwary.
73, Pete
Bill Maddock wrote:
I am considering getting the N8LP LP pan - My K3 already
has the transverter board - what is everyone running
for a sound card - N8LP list several - sure would like some
input! Also how long does it take to assemble the LP-Pan
kit
Thanks and 73,
Bill N4ZI k
K3 #1059
Are
The KRX3 for #900, ordered 16 Nov last year, left Aptos for the UK on
the 8th.
Pete G4PLZ/F5VNB
LB3SA wrote:
It's been a while since I last saw anyone report a KRX3 arrival. Does anyone
know what the current status is?
I ordered mine along with my K3 March this year. The K3 arrived in
And by deliberately transmitting a higher pitch you could make your
voice sound really deep and butch for when you tell someone their signal
is as wide as a barn door. ;-)
Pete, F5VNB
O. Johns wrote:
One way to solve this may seem a joke, but it isn't. Everyone should
buy a little 440 Hz
To avoid any possible doping scandal and reduce any inflammatory
outcomes perhaps they should use a catabolic chamber.
73, Pete F5VNB
Bob wrote:
Is it a chamber lined with well known high priced and overpaid athletes?
73,
Bob
K2TK
Bill NY9H wrote:
Brian
Try a current choke 'balun' instead of the BL2.
As a temporary antenna I have 25m of twin speaker wire run out from the
shack under the roof tiles - that's about 7m - and then the remaining
18m split as a doublet. It hangs at an average height of 5m from a
couple of trees. The 'feeder'
Don
I agree that the BL2 is a true current balun using a balanced design
that chokes common mode currents while also transforming impedances to
ease a conjugate match - albeit one of the ratios is 1:1 - but my
coax-through-ferrite-beads unbalanced common mode choke *only* does what
it says
Factory built ordered 16 November.
Katiegram 22 April, 1.8kHz filter and KRX3 on back order.
Arrived Samazan 10.33 this morning via Santa Cruz, San Jose, Louisville
KY, Köln (Cologne), Marseille, Bordeaux and Carbon Blanc.
Another K3 in France - and I'm a bit closer to WAUPS...
73, Pete
16 matches
Mail list logo