Re: [Elecraft] elecraft,RJ45 Standard

Close. There are 4 pair. On Monday, May 9, 2016 11:42 AM, David Robertson wrote: David Robertson 9:55 AM (1 hour ago) to kenin.stover, Elecraft Kevin, Thanks for the information on the RJ45 standards. what confuses me is there are 6 pair of

Re: [Elecraft] K2/10 to K2/100

The original battery is a sealed Powersonic 2.9AH, mounting flat to the lid about the width of the K2 and 3 or so inches deep. It fits in front of the antenna tuner and just behind the speaker. On Monday, September 8, 2014 2:50 PM, Don Wilhelm w3...@embarqmail.com wrote: John, The

Re: [Elecraft] off topic

I think I have it home, I will look tonight.  I believe I have it in pdf. If so I can forward it to you. On Wednesday, August 6, 2014 4:31 AM, Evert Bakker ev...@pa2kw.com wrote: Just a short question, Anyone around here who has got the manual of the  G800SDX Yeasu Rotor? PLease

Re: [Elecraft] OT GENERAC generators

I would also recommend that.  Very little trouble. On Thursday, July 24, 2014 6:30 AM, John Scott sco...@sandycove-ns.ca wrote: We are considering the installation of a generator here for times when, for one reason or another, commercial power is unavailable.Our electrician has

Re: [Elecraft] Fake FTDI chips

Real serial ports are available on the Dell D810. This will also run W7 32 bit without problems (at least none that I have found). I have used it to program Motorola, Icom and Yaesu radios so far. __ Elecraft mailing list Home:

Re: [Elecraft] K3 suddenly dies

Discharge the cap BEFORE trying to tighten or loosen the screws. From: Vic K2VCO k2vco@gmail.com To: elecraft@mailman.qth.net Sent: Thursday, October 17, 2013 3:37 PM Subject: Re: [Elecraft] K3 suddenly dies Sometimes the screws holding the board to

Re: [Elecraft] FT-5000

Some people will always prefer the Yeacomwood appliance. If they didn't it would be a somewhat limited market -- Phil Carter, WD8QWR QRPARCI #9986, CQRP #3 Fists #6514, FP #262 QCWA #32302, NAQCC #3451 __ Elecraft mailing list Home:

Re: [Elecraft] KPA100 v1.10 vs v1.09

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 I couldn't see anywhere in the 60M manual any mention of firmware above 1.09. So the question remains, what is the difference between these 2 versions of firmware? If I have 1.09, what do I gain by upgrading the firmware. - -- Phil Carter, WD8QWR

[Elecraft] KPA100 v1.10 vs v1.09

Hi there What is the difference between these 2 versions of the firmware? besides $29.00. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.):