[Elecraft] KX3 with Transverter

Has anyone used a KX3 with the Down East Microwave transverter for 432 ? Specifically the L432-28H Many thanks Phil G4UDU __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

[Elecraft] 4m for KX3

If I wanted both 2m 4m modules - how easy to swap out to change bands ? I know you will be using the SMA socket - so will there be a connection on the board or will the antenna cable be hard wired on ? I don’t think the change would be needed on a regular basis - but it would be good to have

[Elecraft] Re KX3 KPA100

I have just run a quick test on my setup here. Using a Bird 43P meter All is OK, carrier power at 100W when measured on 40m was better than 5% accuracy and that is all you will get on this test setup Also checked PEP power output on SSB, same result all OK Have you run the test with the

[Elecraft] KX3 Mic alternative

Reading the list with respect to adding an internal mic - there is an easier option. Take a 90 deg 4 pole mic plug and mount an electret insert inside. Method Open the plug cut the cable strain relief down to about 2.5mm 1/10 inch remaining from the end of the plug Mount the electret insert