Bob,
I guess you missed my post!!
Yeasu Does NOT have the overshoot issue!!
K2QMF
On 9/21/2021 2:14:12 PM, Bob McGraw wrote:
As to the attenuator, a 6 dB attenuator rated at 100 watts is no big
deal. The challenge is to switch the attenuator in and out between TX
and RX modes.
A better solutio
I have a Yeasu FTdx5000 and an FTdx101MP.
Both are driving Elecraft KPA1500's.
The driver power is reduced to about 35 Watts on both! I have no over shoot
with either rig!
Do not use ALC!! Lower the drive power.
No issues! Works Great...
K2QMF
On 9/21/2021 9:38:49 AM, jerry wrote:
On 2021-09
Groups.IO.
email: b...@wjschmidt.com
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Salvatore ["Ted"] K2QMF
Sent: Saturday, July 25, 2020 12:39 PM
To: Elecraft Support ; elecraft@mailman.qth.net
Subject: [Ele
Hello,
I was in the IOTA Contest and a got a Fault message"FAULT: 50V Supply
0.0Volts"!!!
I can't reset this Fault!!
And the HV/Supply Light on the PS is RED!
I tried turning the PS off and back on but no change!!
Any help or suggestions much appreciate...
73,
Ted K2QMF
__
Hello All,
How do you remove the PowerPoll P/S connector from the back of the KPA1500??
Any help much appreciated!
I don't want to force them out!
Thanks,
Sal K2QMF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/e
Hello All,
Does anyone have a clear picture of the KPA1500 "PA Input Board"?? Or a
schematic??
Many Thanks in advance for any info...
73,
Sal K2QMF
Sponsored by
https://www.newser.com/?utm_source=part&utm_medium=uol&utm_campaign=rss
Practice!!
On 4/20/2020 2:21:53 PM, ae...@carolinaheli.com wrote:
What's the best method to send high speed CW with a K3S via Computer?
Serial adapter to the Key port or software via USB or ??
73
Jerry D. Moore
..
__
Elecraft mailing l
Please disregard
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support
From the Power Supply or KPA1500?? Or Both??
On 4/5/2020 5:03:51 PM, Carl Yaffey wrote:
Hum is in the shack.
On Apr 5, 2020, at 4:58 PM, Salvatore Ted K2QMF mailto:k2...@juno.com]> wrote:
Hum on your Transmit Signal??
Or hum in the shack??
Where is the hum coming from??
On 4/5/2020 4:51
Hello All,
Does anyone know if there are any issues with the KPA 1500 when used in a multi
transmitter contest environment??
Thanks in advance for any info of input on this!!
73,
Ted K2QMF
Meghan Markle Confirms Unfortunate News
track.v
Hello All,
Received my new KPA1500 a few days ago!
I love the Amp but I have an issue maybe someone can help with!!
The KPA1500 does NOT play well with other rigs!!
I am driving it with a Yaesu FTdx5000! There is a very big difference in drive
levels for different Bands!! For instance on 160 the
Hello All,
Just received my KPA1500!! Wow what a great Amplifier...
One Question- 160, 80, and 40 seem to require much less drive than 20, 15, and
10!!!
That means I have to readjust drive when changing bands!
Kind of a bummer!! Is there any way around this???
I am driving the amp with a Yaesu F
closet and I hardly ever touch it. It just keeps making watts.
Ken K6MR
From: Salvatore Ted K2QMF [mailto:k2...@juno.com]
Sent: Saturday, November 30, 2019 14:47
To: elecraft@mailman.qth.net [mailto:elecraft@mailman.qth.net]
Subject: [Elecraft] KPA1500
Hello to all.
I just ordered a new
Hello to all.
I just ordered a new KPA1500 and can't wait to receive it.
Was just wondering if anyone on here has used the 1500
in a multi TX contest environment??
If so, how did it perform??
Many Thanks for any info one this beautiful amp..
73,
Ted K2QMF
_
14 matches
Mail list logo
