Dear Reflector gurus, Using my internal K3 soundcard, I can receive RTTY OK, but cannot transmit using MITTY.
I am using the internal K3 soundcard (ugraded my K3 with the K3S parts). The MITTY Option(O) has the proper Input and Output device selected (the internal K3 soundcard codecs). Asking MITTY to trasmit my callsign doesn't key the K3. The MITTY Options > Soundcard tab has the correct Reception and Transmission settings (the K3 codecs). I changed the Windows output device from the K3 internal codec to my headphones, and can hear MITTY transmit into my headphones. So I'm guessing this is a K3 setting, and I'm baffled. I have the K3 set to Data mode, with VOX on. The DATA MD setting is AFSK A, 45 BPS. The K3 CONFIG settings: RS-232 set to USB PTT-KEY set to OFF-OFF (I've tried all the settings) AFSK TX set to FIL OFF The MENU settings: AFX MD is DELAY 5 MIC SEL is set to LINE IN VOX GN is set to 000 Panel settings (lower left knob): The Mic gain is set to LINE 25. Vox delay set to 0.5. On the MENU settings, I ramped up the VOX GN from 000 to 050. Then when I transmitted with MITTY, it silenced the K3 during MITTY transmission, but no power generated. The red TX LED didn't light either. If anyone has suggestions, I'd appreciate it. Thanks, Tyler N4TY ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com