W4ZV wrote:
Zoli Pitman HA1AG-2 wrote:
>
> If I select SUB-RX Ant source Main instead of AUX, it does not rx anyting.
> When I select AUX it works fine from the AUX. According to the manual The
> K1 relay should be engaged then sharing the Main ant between the two RXs
> (lat
Hello,
If I select SUB-RX Ant source Main instead of AUX, it does not rx anyting. When
I select AUX it works fine from the AUX. According to the manual The K1 relay
should be engaged then sharing the Main ant between the two RXs (latest manual
page 42 fig 2). When I change it to Aux it receive
Hi Ruben,
I use samlex 1223's for many years, mainly on my expeditions and also
with K3. You have to know that there are PS's made in BY which look
exactly like the original 1223 but they have no output filtering and
they have a different 12V connector. They do have a noise issue,
particularl
- Original Message
From: Dick Dievendorff
Barry asked for the ability to display AGC parameters. These values are
currently read by accessing menus and reading them from the VFO A display
area. During that menu access, another application might send an UP or DN
command, which could
This is not a solution. It is a workaround. :)
73, zoli ha1ag
- Original Message
Yes, a well known issue for a LONG time...with a SUPER EASY solution.
It is indeed due to the internal speaker.
A year or so ago, I got a call from a local (a couple miles away) that
he had a "spurious
Hello,
I just received my K3 2 weeks before the WW CW so it was a rough transition
taking this rig in use. Steve K6AW helped me a lot, spending lots of time with
me on Skype explaining and giving tips about how to use the K3 in contesting
optimally. (TNX!!) I took the K3 to Portugal where I ha
6 matches
Mail list logo