This is rather interesting. Last year my local borough contacted me about
my antenna support. It is 30 feet high and is my end support for my EFHW. I
was asked when did I install the pipe? I said 15 years ago, why? I was
promptly told that the boroughs 1.2 GHz comm link between the pump house
and w
Check out MPJA.com as they have LM358p, ten for 2.95.
On Mon, Oct 18, 2021, 5:55 PM Lou Mecseri wrote:
> My friend's refrigerator fan died. No replacement or substitute (one
> they tried was 80dB loud) available. Replacement cost, and he is lucky,
> $2,000 fir a new one.
>
> Super efficiency is
Reminds me of the time, way, way back going up on MT. Diablo with a two
meter lunch box and a simple J pole antenna. Man, what a blast that was!
On Mon, Sep 13, 2021, 2:38 PM Hank via Elecraft
wrote:
> Great story!!!
>
> I remember in 2019 making a cool contact like that. I was running the KX3
>
I am reducing my asking price of the K2, SN: 7954 and hard rock 50 amp. I
will split them up if necessary. Neither have ATU's. K2 has the k2I/O and
KFIL, asking $650. The HR50 asking $200.
You pay shipping.
Contact me off the reflector, please.
Thanks.
__
Greetings, I have available a K2/10, SN 7954, built July 2020. Installed
are the K2 I/O board and the K2 AFIL. With the K2, also including the hard
rock 50 amplifier. The K2 was tested and aligned by Elecraft in October.
Asking $1100 for the package. Shipping is negotiable. Please contact me off
th
Sent: 11/21/2020 9:53:35 AM
> Subject: Re: [Elecraft] K2 purchase considered
>
> >
> >Me neither. #586.
> >
> >John K7FD
> >
> >> On Nov 20, 2020, at 10:13 PM, Vic Rosenthal
> wrote:
> >>
> >> Strange. I have K2 #725, which received
I will throw my two cents in on this. Quite frankly, I do not see how a K2
got the reviews it did over the years. I put one together in July to do
something during lock down. After assembly, which was really a pleasure,
and in two or three weeks after, I noticed a disturbing pop when tuning
around
Greetings folks. My K2 has a snapping sound when tuning the band regardless
of mode and it seems to happen when I am close to a signal...within 4 khz
or so. The snapping sound can be very strong sending the s meter soaring.
Not only does the s meter go soaring, so do my ears!
At this point I am not
Anyone have a KRC2 in working condx willing to sell, built or unbuilt?
Contact me off the forum please.
Thx
Barry
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Any surplus KAF2 audio filters anyone would want to part with, built or
unbuilt?
Barry
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth
Greetings. Since selling my Kx3, I have an interface cable set for Kx3/2 to
a hardrock 50 amp. This has never been used and includes two cables and a
pcb to db9 connector. Asking $25 which includes shipping. I also have a
West mountain radio 15 watt power speaker for anything that needs extra
audio
I currently have a new, never used, hardrock 50 cable set for the kx3/2
radios. This is the two interface cables and the db9 pcb with the jacks for
easy hookup. Asking $25 includes shipping.
Contact me off line kthre...@gmail.com if interested.
Thanks for reading
Barry
K3bo
___
Greetings. I just completed my K2 build and the RX works great. Wish I
would have done this years ago. One issue I noticed with the transmitter is
that when I press the tune button, the output power will either be above or
below the power control setting. I found this during the transmitter
alignme
Murry, in rf bag 2 should be that 15k.
Barry
On Thu, Jul 16, 2020, 11:16 AM Harlan Sherriff via Elecraft <
elecraft@mailman.qth.net> wrote:
> Not trying to be a smarty, but take a quick look at list of components in
> each “accessory” building guide.
>
> Sent from my iPhone
>
> > On Jul 16, 2020,
I too am building a K2, sn 7954. They are using a LED bar for the back
light with a spacer instead of the cut off pcb material. The diffuser ends
have cutouts that sit on the LED bars. Wonder where Elecraft found these
gems
Barry
On Sun, Jul 12, 2020, 1:23 PM Don Wilhelm wrote:
> Murray,
>
>
grades in
> the KPA100 shield. The latest has a 1/4 inch wide slot above the SO239
> jack and has spring clips that ground the shield to the sides of the
> base K2. For other than the Field Test KPA100s, the board has not been
> changed.
>
> 73,
> Don W3FPR
>
> On 6/25/
Could someone tell me main differences between the version A and B for the
K2?
Is the version B being shipped now if ordered?
Thanks
Barry
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman
Thanks for allowing me to post on this group, the K3s, Kx3 and K1 have been
sold!
Barry
K3bo
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailm
I sold the Kx3 and Px3, however I still need a good home for the K3s. It is
very clean, none smoker, and has extra filters BUT no ATU or DVR.
Serious inquiries only.
Thanks for reading
Barry
K3bo
__
Elecraft mailing list
Home: http://mailm
This is a classic case of CRE or Cosmic Ray Effect. No reason, just happens.
On Sun, Jun 7, 2020, 1:51 PM Ian Kahn, NV4C wrote:
> Ray,
>
> By any chance did your first computer receive any updates from Microsoft
> recently? MS updates are well-known to completely bugger custom
> settings, includ
Check out qrp-shop.biz. They have a knock off of the kat100
On Wed, May 27, 2020, 5:58 PM Matt Maguire wrote:
> The KXPA100 and associated ATU is well integrated with KX3, and it
> also works very nicely with the K2 if you make up the keying circuit
> mod. It's sad to hear they've stopped produc
Guys, the Panadapter PX3, has been sold.
I did not mention that the KX3 has the KXPD3 paddle too.
Barry
K3bo
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mail
Hello! This is my first time posting on this reflector so I hope I am not
doing anything I should not be doing.
I have a K3s/100 and Kx3/Px3 for sale.
If anyone is interested please contact me for the particulars.
Both radios are in excellent shape. I had the K3s listed on qrz but little
interest.
23 matches
Mail list logo