)
73, Markus HB9BRJ
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list h
t; antenna offered
by SOTAbeams <http://www.sotabeams.co.uk/bandspringerMidi40m30m20m/> .
73, Markus HB9BRJ
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Good-length-for-portable-antenna-tp7630402p7630403.html
Sent from the Elecraft mailing
roll down on the page)
and free all those blocked COM ports!
73, Markus HB9BRJ
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Help-with-KX3-Utility-tp7629219p7629249.html
Sent from the Elecraft mailing list
chance to
find the root cause.
Markus HB9BRJ
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-Audio-Drops-tp7622169p7624819.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Quite some time ago I did some tests using FSQCALL v0.24.6 and my K3 TRX.
I used the "Use CAT commands from file" option. In a text file, you have to
define the relevant COM port and CAT parameters. See the help text for
details.
Markus HB9BRJ
--
View this message in context:
http:
Ai4PF wrote
> everything works fine on WSP 2 except I never see any of my numerous TX's
> in the database.
Do you receive (decode) other WSPR stations? If yes, frequency and PC time
are ok.
During TX, does your ALC show 4-5 bars?
73, Markus HB9BRJ
--
View this message in con
rrent pulses). In total, only 25% of the total Ri comes from the
8 cells. Battery holder and wiring are responsible for 75%.
73, Markus HB9BRJ
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KX3-internal-battery-problems-tp7617201p7617307.html
Sent from the Elecraft ma
/2013/05/usb-to-serial-prolific-2303-device.html
Works great! No need to throw away your old Prolific PL2303 device!
73, Markus HB9BRJ
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Prolific-driver-windows-10-tp7605939p7615294.html
Sent from the Elecraft mailing list archiv
Same PS here, but a RigRunner 4005 in between PS and K3.
RX 13.5V @ 1.26A
TX (100W CW) 12.0V @ 17A
This yields a resistance of 95mOhms which I consider ok.
73, Markus HB9BRJ
--
View this message in context:
http://elecraft.365791.n2.nabble.com/normal-K3-voltage-drop-on-TX
) SHIFT control is inactive
(3) LO CUT and HI CUT both act as WIDTH control
Am not sure if these limitations are a logical consequence of SYNC DATA ON
or an unwanted side-effect.
73, Markus HB9BRJ
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-SHIFT-WIDTH-in-DATA-A-mode
both indicating a LO/HI cut, but what effectively happens is a width
variation. Verification is easy: Acoustically or on the P3 display.
73, Markus HB9BRJ
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-SHIFT-WIDTH-in-DATA-A-mode-tp7601016.html
Sent from the Elecraft ma
encoder's
response is immediate. Could it be that in addition to defective encoder
components, CPU load is another cause?
Markus HB9BRJ
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Re-Sluggish-Encoders-tp7600168p7600208.html
Sent from the Elecraft mailing list archive
Two things I would check:
(1) polarity ok (center positive)?
(2) measure battery voltage while it delivers 0.5A or more to any available
load.
Markus HB9BRJ
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KX3-Does-Not-Power-On-with-External-Power-Supply-tp7593605p7593607
resistance (measured
with a 4-connector battery DC resistance meter forcing current pulses thru
the cell under test).
My conclusion: 25% of the 1.15 Ohms are due to the 8 cells, 75% originate in
the battery holder and additional wiring.
Markus HB9BRJ
--
View this message in context:
http
witched on when carried around in a soft case?
Markus HB9BRJ
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Ultimate-compact-KX3-carrying-case-received-perfect-match-for-radio-accessories-tp7557886p7591118.html
Sent from the Elecraft mailing list archiv
o to
power the KX3.
Chuck N6CAP is using it in his “KX3 Portable Lipo Power Solution” project:
http://chuckprice.wordpress.com/2014/04/06/kx3-portable-lipo-power-solution/
Markus HB9BRJ
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KX3-LiPol-battery-pack-and-KX3
-Port Manager:
http://www.uwe-sieber.de/comportman_e.html
COM Name Arbiter Tool:
http://www.uwe-sieber.de/misc_tools_e.html
(scroll down on the page)
73, Markus HB9BRJ
--
View this message in context:
http://elecraft.365791.n2.nabble.com/COM-port-not-working-tp7568905p7568961.html
Sent from
eout warnings " enabled
- "Dual VFO tracking" disabled
- "Refresh interval" 200ms
These settings were probably inherited from HRD 5.0 when upgrading to HRD
5.1.
No issues at all (so far)...
73, Markus HB9BRJ
--
View this message in context:
http://elecraft.365791.
Nate,
Take a look at a similar problem (and its solution) I had some time ago:
http://elecraft.365791.n2.nabble.com/K3-Rf-gain-tracking-main-vs-sub-tp5668917p5676134.html
73, Markus HB9BRJ
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-RF-Gain-control-reduced-range
3552.00
(3) tap CLR:
--> same as (1) above
73, Markus HB9BRJ
--
View this message in context:
http://elecraft.365791.n2.nabble.com/P3-Know-bug-tp6949119p6953190.html
Sent from the Elecraft mailing list archive at Nabble.com.
ction (e.g., by holding PF1 ),
then exit the menu.
73, Markus HB9BRJ / AE6MG
--
View this message in context:
http://elecraft.365791.n2.nabble.com/pactor-on-k3-tp6852177p6852859.html
Sent from the Elecraft mailing list archive at Nabbl
Had the same problem in October 2010: RF gain tracking error between main and
sub RX.
Lyle then sent me a beta K3 Utility which performs the RF gain calibration
at 2 different power levels (-73 dBm and -33 dBm). Of course you need an RF
source capable of providing these power levels. This solved m
out
PTC PTT output (pin3) to K3 PTT in
PTC GND (pin2) to K3 GND ;-)
73, Markus HB9BRJ
--
View this message in context:
http://elecraft.365791.n2.nabble.com/SCS-Pactor-3-modem-with-K3-tp5803075p5803495.html
Sent from the Elecraft mailing list archive at Nabble.com.
___
After reading all comments, I performed an RF calibration using a -73dBm
source and the K3 Utility 1.3.10.15. First run with factory defaults, second
run using my signal source. A picture tells more than a lot of numbers:
http://home.datacomm.ch/hb9brj/RFgain.jpg
X axis = RF gain position angle
I always experienced a significant difference when comparing main/sub signal
levels.
Mike's message triggered me to search for the cause.
Step 1: Changed RF/AF controls back to independent:
SQ MAIN = 0; SQ SUB = 0; SUB AF = nor.
No luck, the sub signal level was still much lower than main.
Step
Take a look at Faros by VE3NEA: http://www.dxatlas.com/Faros/
Faros decodes even very weak signals.
Some beacons are off target, so use sufficient RX bandwidth.
73, Markus HB9BRJ
--
View this message in context:
http://elecraft.365791.n2.nabble.com/NCDXF-IARU-Beacons-tp5510562p5511829.html
Martin,
Your eyes are better than mine! I could not find any APP vendor in
Friedrichshafen. My original stock mail-ordered in the U.S. is nearly
depleted. Please let the many European readers of this list know who is
selling APPs in Europe. Thank you!
73, Markus HB9BRJ
--
View this message in
Don Rasmussen wrote:
>
> This code is fresh off the java mill, enhanced K3 operation at your
> fingertips.
>
... but it requires the outdated VBRUN300.DLL in order to run SETUP.EXE.
If the app is programmed in Java, why not distribute it as Java archive?
73, Markus
--
View this message in
Doug Phillips wrote:
>
> Like all endeavors RTFM applies here, very good pdf file instructions.
>
Non-WSPR users, take a special look at the excellent Appendix C "Frequency
Calibration".
Just measured my K3 and found A = -0.5 Hz, B = 0.33 ppm. Very good, isn't
it?
Did 3 measurements at 6, 10
eter keeps oscillating between 50...100% of
requested power.
73, Markus HB9BRJ
--
View this message in context:
http://n2.nabble.com/K3-and-Beta-3-44-tp3859857p3863691.html
Sent from the [K3] mailing list archive at Nabble.com.
__
Elecraft ma
HRD creates quite some RS232 tfc. You see this when spinning the VFO knob and
watching how fast the HRD screen is following. So I guess that RS232 speed
could be an issue. K3 default is 4800bps. I'm using 38400bps and do not have
any keying problems.
73, Markus HB9BRJ
--
View this messa
workaround:
Set PWR = 15W, then define actual TX power using MIC gain.
73, Markus HB9BRJ
--
View this message in context:
http://n2.nabble.com/K3-Power-Output-tp3563445p3566192.html
Sent from the [K3] mailing list archive at Nabble.com.
___
at 5W the KPA3
is bypassed.
Will run a test at higher power to see whether or not it makes a difference.
73, Markus HB9BRJ
--
View this message in context:
http://n2.nabble.com/K3-Power-Output-tp3563445p3565519.html
Sent from
o Notch is gone in 3.25.
73, Markus HB9BRJ
--
View this message in context:
http://n2.nabble.com/Auto-Notch-Broken-in-3.25-%28I-probably-missed-this%29-tp3454576p3454621.html
Sent from the Elecraft mailing list archive at Nabble.com.
_
cy
of the KPA3.
73, Markus HB9BRJ
--
View this message in context:
http://n2.nabble.com/K3-voltage-under-load-tp3010557p3019971.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home:
Is there a command to put both main and sub in both ears?
(I've wanted this from day one.)
Try this:
!bedb;
Thanks Barry!
This leads to the following conclusion:
In the command !bexx; 4 bits of the 2nd byte xx are responsible for the audio
routing:
bit0 (LSB) = Main Left
bit1 = Main Right
Guys, i just completed the initial test and calibration.
I hear no sound from the speaker or headphone, the rx shows no s-meter
action when i transmit a signal with an other tx.
There are no ERR-Messages.
The radio ist equipped with the Transverter-Interface, I still have to
install the Sub-RX a
I have recently become interested in the WSPR beacon mode
(http://physics.princeton.edu/pulsar/K1JT), which involves transmitting a
continuous signal for periods of 2 minutes. At a level of 5W the underside of
the K3 gets uncomfortably hot. Since this is the sort of thing you want to
leave ru
For the past several days I have been seeing a couple of powerful digital
signals, S9+, between 14.018 to 14.032MHz. They seem to be comprised of 4
or 5 discrete frequencies rapidly moving around in a bandwidth of about
2Khz. Can anyone let me know what this might be?
The latest IARU Region 1
Please let us know how the new features are working. Meanwhile, Lyle
(KK7P) and I are working on the next round
Thank you Elecraft, this is a big step forward!
I found 2 uses for my independent sub-RX:
- monitoring IARU beacons on 2 bands simultaneously
- listening shortwave broadcast sta
No need to use a 3rd party software.
Have configured Win XP's time service as described in
http://support.microsoft.com/kb/314054
http://support.microsoft.com/kb/314054 .
Have chosen a time server which is closer to my location and reduced the
update interval to 30min = 1800s.
Markus
--
View
Lyle Johnson wrote:
>
>> While on the subject of time, where is the oscillator that is used by
>> the built-in clock on the K3?
>
> Front panel board.
>> Is it adjustable?
> No. Sorry...
>
U16 is the RTC (real-time clock) chip:
http://www.nxp.com/acrobat_download/datasheets/PCF8563_6.pdf P
Ralph Tyrrell wrote:
>
>
> Wayne gave us a way to read out what the ATU settings.
>
> Does anyone have the formula or formulae for using "CT or CA and the L
> and C values to determine the impedance presented to the ATU?
>
>
Had the same idea: Using my K3's ATU settings to determine the im
ab2tc wrote:
>
> Also using Firefox 3.07. No such problem here. Maybe it's a localization
> problem; with US-English settings everything is fine.
>
Found the culprit: Firefox add-on "NoScript" was blocking some of the code
of the Nabble page.
After allowing all scripts on this page to run, eve
I am accessing Nabble with Firefox 3.07.
Since a couple of days the page is totally unreadable.
All topics titles are shown as "Nabble", and none of the links works.
Any workarounds (except using another browser)?
Markus
--
View this message in context:
http://n2.nabble.com/Nabble%3A-new-look-a
I had an RF feedback problem when transmitting in digimodes (TX audio via
LINE IN).
On some bands and at power levels above 20W, my TX audio was distorted.
BTW, my previous TRX did not show this problem in the very same setup.
Similar to MIC, also LINE IN has an RFC in its GND line (L5 on the KIO
46 matches
Mail list logo