OK all. I'm installing a 6m rotating beam and feeding it with LMR400. Would you
connect the LMR to the antenna and allow it to move with the rotation, or run a
short length of something much more flexible between the antenna and LMR? I
have my concerns that the solid heavy inner conductor of
This sounds like a great project for an Arduino. The problem I see is an "easy"
way for the end user to be able to let the Arduino know what command each
pushbutton represented. Maybe a file on an SD card that held those variables?
The op would only have to populate the file on the SD card
I have a K2 top panel with speaker and aux/IO board I no longer need. Someone
willing to pay shipping, it's yours. Contact me off list.
HsherriffATreaganDOTcom
Sent from my Verizon Wireless 4G LTE smartphone
__
Elecraft
Panel is gone..
Sent from my Verizon Wireless 4G LTE smartphone
Original message
From: hsherriff <hsherr...@reagan.com>
Date: 01/28/2016 5:07 PM (GMT-05:00)
To: Elecraft Email <elecraft@mailman.qth.net>
Subject: [Elecraft] K2 enclosure top
Is there an effort to update the P3 programmer's manual to cover the xmtr
monitor?
Harlan NC3C
Sent from my Verizon Wireless 4G LTE smartphone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
I'm the supervisor of a metrology lab and that is one of the first things I
ensure a new technician understands. And many times it isn't the test equipment
that is at fault, nor the unit under test, but the methodology of using that
test equipment. Not using the equipment "guard"
I have the same unit with the tracking gen. Great setup.
Sent from my Verizon Wireless 4G LTE smartphone
Original message
From: Alan
Date: 10/30/2015 6:21 PM (GMT-05:00)
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] The Technical Side of Ham
I think it's a great idea.
Harlan NC3C
Sent from my Verizon Wireless 4G LTE smartphone
Original message
From: Phil Hystad
Date: 09/21/2015 5:58 PM (GMT-05:00)
To: Elecraft Reflector
Subject: [Elecraft] KX3 (or, K3)
Bruce,Check out K2 and PSK31 QA and PSK31 with the K2 here:
www.elecraft.com/Apps/application_notes.htm#PSK31
Top left of page
HTHHarlan NC3C
Sent from my Verizon Wireless 4G LTE smartphone
Original message
From: Bruce Rattray ratt...@accesscomm.ca
Date: 08/08/2015
Ok. Got mine in the mail and able to work with it today. Downloaded and
installed P3 firmware... no problem. Connected HF sensor...FBConnected UHF/VHF
sensor. Bad news. The P3 display looks like the rig transmit is cyclic at about
1 sec intervals. Screen goes front normal receive to
Received mine yesterday. Was thinking of making a switching box to switch
between sensors. Looking at the manual, looks like you need to tell the P3 the
span of the current sensor. Could do this via a arduino but the programmer's
manual hasn't been updated for the TXmonitor. Anyone know
Got a call. mine is on the way
Sent from my Verizon Wireless 4G LTE smartphone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
I purchased this before I found out I didn't need it for the K3. Hooked it up
but never used it. Comes with K3 cable
If interested, contact me off list at:hsherr...@reagan.com
Sent from my Verizon Wireless 4G LTE smartphone
__
Jimjust order one,twice. Hi hi
Harlan NC3C
Sent from my Verizon Wireless 4G LTE smartphone
Original message
From: James Wilson w4rk...@gmail.com
Date: 07/02/2015 4:03 PM (GMT-05:00)
To: Elecraft elecraft@mailman.qth.net
Subject: [Elecraft] K3 Mod Kit Shipping
Brian,A configuration file can only be sent to the same radio. Part of the file
is the radio serial number. The only way I know to do what you want is to
manually set it up, or possibly use a third party software program. Win4K3
software may be your solution. You should be able to save
Just a few more days and we'll get to see the new P3 power monitor. Hope they
open up Internet Sales at the same time can't wait to add this to my K-line.
HarlanNC3C
Sent from my Verizon Wireless 4G LTE smartphone
__
Ok those that are at the hamfest... what NEW thing has Elecraft shown at the
fest?
Sent from my Verizon Wireless 4G LTE smartphone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
I finally figured out why the reflector isn't working. Something BIG is going
to be announced this weekend and the reflector has been hijacked so if we
aren't at the event we won't get to know about it. .
Harlan
NC3C
Sent from my Verizon Wireless 4G LTE smartphone
But at least Intergalactic Buisness Mail
(IBM) delivers 24/7 and 365.
Harlan
NC3C
Sent from my Verizon Wireless 4G LTE smartphone
div Original message /divdivFrom: Matt VK2RQ
matt.vk...@gmail.com /divdivDate:04/04/2015 2:33 AM (GMT-05:00)
/divdivTo: Richard Jubinville
Wouldn't that be great. ...
Harlan
NC3C
Sent from my Verizon Wireless 4G LTE smartphone
div Original message /divdivFrom: Scott Manthe
scott.man...@gmail.com /divdivDate:03/31/2015 11:18 PM (GMT-05:00)
/divdivTo: elecraft@mailman.qth.net /divdivCc: /divdivSubject: Re:
John
Check out Win4K3 by Tom. Find it at va2fsg.com
Harlan
NC3C
Sent from my Verizon Wireless 4G LTE smartphone
div Original message /divdivFrom: John Reilly
reill...@comcast.net /divdivDate:03/30/2015 6:19 PM (GMT-05:00)
/divdivTo: elecraft@mailman.qth.net /divdivCc:
There is a set of 17 pages pdf that can be downloaded from www.mods.dk
No idea how old it is ...
Harlan
NC3C
Sent from my Verizon Wireless 4G LTE smartphone
div Original message /divdivFrom: Gary Gregory
vk1zzg...@gmail.com /divdivDate:03/28/2015 10:06 PM (GMT-05:00)
:-)
Gary
Vk1ZZ
K3, KX3, KPA500-FT, KAT500-FT,P3.
On 15/03/2015 8:26 AM, hsherriff hsherr...@reagan.com wrote:
Gary
They have been working on that for how many years now?
Harlan
NC3C
Sent from my Verizon Wireless 4G LTE smartphone
Original message
From: Gary Gregory vk1zzg
Gary
They have been working on that for how many years now?
Harlan
NC3C
Sent from my Verizon Wireless 4G LTE smartphone
div Original message /divdivFrom: Gary Gregory
vk1zzg...@gmail.com /divdivDate:03/14/2015 5:14 PM (GMT-05:00)
/divdivTo: Vic K2VCO k2vco@gmail.com
Phil
Don't forget the microwave oven
Sent from my Verizon Wireless 4G LTE smartphone
div Original message /divdivFrom: Phil Hystad
phys...@mac.com /divdivDate:03/11/2015 4:47 PM (GMT-05:00)
/divdivTo: Phil Wheeler w...@socal.rr.com /divdivCc:
elecraft@mailman.qth.net
I would be interested as well
Harlan
NC3C
Sent from my Verizon Wireless 4G LTE smartphone
div Original message /divdivFrom: Harry Yingst via
Elecraft elecraft@mailman.qth.net /divdivDate:02/15/2015 4:23 PM
(GMT-05:00) /divdivTo: brian als...@nc.rr.com,
Yesplease Wayne.
Sent from my Verizon Wireless 4G LTE smartphone
div Original message /divdivFrom: Ken wa8...@gmail.com
/divdivDate:01/27/2015 5:53 PM (GMT-05:00) /divdivTo: Wayne Burdick
n...@elecraft.com /divdivCc: Elecraft Reflector
elecraft@mailman.qth.net
Well... actually it depends on a couple of factors. Temperature, humidity, and
medium it is traveling through.
343.2 m/sec in dry air at 20C.
1484 m/sec in water
5120 m/sec in iron
Crap.that is more than I need to know
Harlan
NC3C
Sent from my Verizon Wireless 4G LTE smartphone
Don't think you will find the KPA500 schematics there nor the KAT500
Sent from my Verizon Wireless 4G LTE smartphone
div Original message /divdivFrom: Nr4c
n...@widomaker.com /divdivDate:12/30/2014 2:10 PM (GMT-05:00)
/divdivTo: elecraft elecraft@mailman.qth.net
Maybe just some good scotch. ...why ruin it with eggnog
Sent from my Verizon Wireless 4G LTE smartphone
div Original message /divdivFrom: Byron N6NUL
by...@n6nul.org /divdivDate:12/24/2014 1:02 PM (GMT-05:00)
/divdivTo: Eric Swartz - WA6HHQ, Elecraft e...@elecraft.com
This sure would be a nice Christmas present I could get for myself. .if it
were only available by then.
Sent from my Verizon Wireless 4G LTE smartphone
div Original message /divdivFrom: Eric Swartz - WA6HHQ,
Elecraft e...@elecraft.com /divdivDate:12/09/2014
Alright. .
Sent from my Verizon Wireless 4G LTE smartphone
div Original message /divdivFrom: Eric Swartz - WA6HHQ,
Elecraft e...@elecraft.com /divdivDate:12/09/2014 3:14 PM (GMT-05:00)
/divdivTo: d...@w3fpr.com,Harry Yingst hlyin...@yahoo.com,Elecraft
Well said Mel
Harlan
NC3C
Sent from my Verizon Wireless 4G LTE smartphone
null
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
I second that emotion (sic).
Sent from my Verizon Wireless 4G LTE smartphone
div Original message /divdivFrom: zumbr...@comcast.net
/divdivDate:12/04/2014 11:52 AM (GMT-05:00) /divdivTo: Elecraft
Reflector elecraft@mailman.qth.net /divdivSubject: [Elecraft] P3 UPDATE
There is an Android app that will read text files out in code...
Harlan
NC3C
Sent from my Verizon Wireless 4G LTE smartphone
div Original message /divdivFrom: Phil Wheeler
w...@socal.rr.com /divdivDate:12/02/2014 6:06 PM (GMT-05:00)
/divdivTo: Elecraft Reflector
Jim
You should be able to get the drivers from the download section of the Elecraft
site
Harlan
NC3C
Sent from my Verizon Wireless 4G LTE smartphone
div Original message /divdivFrom: Jim - KE8G
k...@cox.net /divdivDate:11/18/2014 7:50 PM (GMT-05:00) /divdivTo:
Elecraft
Same here
Harlan
NC3C
Sent from my Verizon Wireless 4G LTE smartphone
Original message
K3, KPA500, KAT500, and P3 are on 24/7 most of the time unless we're
leaving for a day or two. Works for me.
73,
Fred K6DGW
- Northern California Contest Club
- CU in the 50th Running
Thanks Harry. I just thought it was strange that it changed right where the
crystal boundaries are. Still not sure I don't have a bum 2m module. I haven't
looked at the actual signal to see how it looks.
Sent from my Verizon Wireless 4G LTE smartphone
div Original message
Wes
I'm assuming you are referring to connecting the KAT power supply up to the K3
12v auxiliary output. You are correct, the KAT should not be connected to
that. The KAT draws up to 1.5A but the K3 12v aux is only good for 1A. ..if it
has the mod.
I really don't see this as being a
to me is that there is a timing issue, which if the case, is poor
integration. IMHO, of course.
Wes N7WS
On 10/4/2014 2:36 PM, hsherriff wrote:
Wes
I'm assuming you are referring to connecting the KAT power supply up to the
K3 12v auxiliary output. You are correct, the KAT should
Finally got around to installing this in my K3.
There seems to be a large difference in output power vs input power when
transitioning across the 146.000 threshold.
Below 146, 0.5mW drive gives 6 out. Above 146 it only gives 2 out. And swr does
not change. Ideas?
Harlan
NC3C
Sent from my
Just hope the sensor will work with the KPA500 and not just the K3
-Original Message-
From: Alan n...@sonic.net
Sent: Saturday, August 16, 2014 9:08pm
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Rf sensor
Right, the sensor is an optional module that plugs into the rear-panel
I received an off list responce that said my thinking was ok
OK. Then why am I getting 0.2 volts out?
And with 1dB selected, I should be getting 0.8928.but I get 0.9936 with
either 1dB switch selected. YET, all of the resistors are installed
correctly and the suggested
Well Love my K2 (5XXX) but since I have my K3 and want to go mobile HF,
have been looking for a TS480HX. Willing to trade K2-100, SSB from a
non-smoking home. Contact me off list if interested.
Harlan
NC3C
__
Elecraft mailing list
working on an app to clone K3. Almost finished.
Need help with the xmlwriter and xmlreader functions. Please contact me
off line.
hsherriff at reagan (dot) com
Thanks
Harlan
NC3C
__
Elecraft mailing list
Home: http://mailman.qth.net
I can't find it on the Best Buy website, but here is a description at the acer
website.
http://us.acer.com/ac/en/US/content/model/NU.SGYAA.003
-Original Message-
From: Joe Subich, W4TV li...@subich.com
Sent: Tuesday, March 19, 2013 10:02am
To: Harlan hsherr...@reagan.com
Cc:
I'm sure there is a wealth of info here on the reflector. I am
planning on putting up a loop antenna around the eves of my house. I
am running the K2 without external amplifier. Two questions:
1. Do I need to run the antenna wire using insulators, or can I just
use insulated staples and staple
Ok, I had just graduated electronics trade school. You know, 20
months of intense training in everything from component identification
to superhet receiver theory, to radar fundamentals. It was in 1970
just before I entered the military.
I was visiting my parents home in Florida on a humid
Dick,
Not an expert here, but I believe your audio is not working as it
should. I was able to get the following S+N and N readings with my K2
(5115) using the XG2 at 1uV out.
1.45 Vrms and 34mVrms which is MDS of -139.
I think your MDS is within reason, but you should be getting a much
OK, here were my symtoms:
Just completed Assembly Part II.
Performing the VCO alignment... all is well (all voltages well in
range)until I get to the 10m band. The Low freq. reading is 3.046...
ok so far. But as I tune towards 28,800 I lose lock at about 28,400 or
so voltage ramps up to
In the K102 Programmer's Reference manual, it states that for those
who want to try their hand at programming the K2, to look on the site
for source code examples. Well, I've searched all over the site and
can't find any I will be using VB6 and sure would like a couple of
examples for
Well, today I took the plunge.
I'm a fairly new No-Code Tech (Dec last year). I am working on my
code, slowly but surely. Had wanted to get my ticket since my cousin
(K8CCJ) showed me his shack MANY years ago and finely did...
Have been working 2m since getting my ticket, but wanted to go
52 matches
Mail list logo