Joe,
I have the same problem with my AGC and when I replaced the 5.068MHz X1
the problem remained. I wonder if both crystals are bad or if there is
some other cause? In my case, when I turn off the AGC, the s-meter gets
pegged at +40 and the audio is muted. Did you change any other
components or
I seem to be having a problem with the AGC control on my K2. With no
signal input, when I turn off the AGC the s-meter reads +40 and stays
there regardless of rf gain setting whereas the K2 manual indicates that
the s-meter should increase when turning the rf gain ccw. Also, I can
hear the 1uV
Leigh,
I found the advice from Jerry below very useful and the solution to my
WTCPT problem.
Jeff
-Original Message-
From: Jeremiah McCarthy
Sent: 1/11/2006 11:33:11 AM
To: [EMAIL PROTECTED]
Subject: Re: Weller
Jeff:
I use the same 700 degree tips and they last for YEARS!!!...I am
Jerry,
Thanks for that advice. I did notice that the tip seemed to be glowing
and that the charing is consistent with the tip being hotter than it
should (ie always on). I checked the magnetic slug and is may have
seized. I also noticed that there was no clicking sound when the problem
charring
I have recently completed building my K2 Transceiver (Dec. 20, 2005) and
am now looking for suggestions on a good value/performance desk
microphone. This is the first SSB rig I have owned and am very pleased
with it so far. I am currently preparing to take the General Class
license exam and
5 matches
Mail list logo