I have seen general definitions about motors for driving a capacitor in Mag
Loop. But I have not seen a recommendation of a specific type to look for
on Amazon or Ebay. For starters I am looking for a 12vdc reversible motor.
I would like to start with a simple push button system for tuning.
I could use some help with a MagLoop. I constructed a 48" loop from 3.8"
copper pipe. I have a 51 pf capacitor across the open end of the loop. I
am feeding the loop with a 4 turn coil around the copper pipe opposite of
the capacitor. Before checking the loop I tested a carbon resistor on the
A person recently provided a link to a clean Wall Wart power supply he
bought for his KX3. I have searched for it and cannot find it. Could
someone please repost the link?
John Pierce
__
Elecraft mailing list
Home:
My kitchen, under cabinet lights, are LEDs. With those lights turned on my
noise floor changes from -128db to -102db. If the circuit is changed to a
different phase the noise improves by 6db. All of this at 7mhz and other
higher bands. Needless to say the AM broadcast band is highly affected
I have several dimmers around my house that generate 20db of noise on the HF
bands. I have seen some recommendations for ferrite beads that can be used
for filtering. However, I cannot find that info. Some were snap on beads.
I am assuming that locating them in the power feed lines to the
Has anyone used the K3 EZ software on a windows computer with the K3s? Is
it compatible?
John, AD2F
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
I am new to Elecraft and have a K3s. What are the advantages of K3 EZ?
John, AD2F
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Does anyone have information about how to use an ICOM AH4 antenna tuner with
a K3s. I have one that is in a remote location, so getting the K3s ATU will
not help me.
John, AD2F
__
Elecraft mailing list
Home:
8 matches
Mail list logo