Hi all. I recently put a remote antenna switch in my HF system. This
switch (a WA4MCM kit, RAAS-4a) is capable of reading band data from several
radios, including my Elecraft K3S. For several years I have had a KPA-500
amplifier in line, working seamlessly with my K3S, band switching
automatical
Hi Ray. Either I was unclear in my description, or it was mis-read. According
to the display of the amplifier, it is ALWAYS set for the 60 meter band,
regardless of what band I am actually operating.
73,
Ken, KJ9B
From: Ray
Sent: Tuesday, August 29, 2023 3:06 PM
To: ken.k...@gmail.co
Note: I originally sent this reply to K9YC only, forgetting that's how this
reflector is configured. Following is my reply, in case anyone is playing
along.
73,
Ken, KJ9B
-Original Message-
From: ken.k...@gmail.com
Sent: Tuesday, August 29, 2023 10:55 PM
To: j...@audiosystemsgroup.com
After the switch. Here's a crude diagram:
|-> LDG Tuner -> OCFD
K3S --> KPA500 --> Switch -|-> SteppIR
|-> Dummy Load
Ken
-Original Message-
From: elecraft-boun...
Hello. I recently bought a very nice K3 from a friend. It has the KAT3
auto-tuner installed. Due to the duty cycle of most digital modes, most, if
not all, external auto tuners are "de-rated" for digital modes. I haven't
been able to find any reference to this for the KAT3. Does anyone know th
Make sure your K3 didn't get put in "Test" mode, shown by a flashing "TX"
toward the right side of the display.
73,
Ken, KJ9B
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Jorge Diez - CX6VM
Sent: Friday, March 8, 2024 8:59 AM
To: Howard K6IA Elecraft Support ; E
All the preliminary stuff starting with the icloud URL is icloud
"protecting" you from opening what could be a suspect URL. Although in this
case, if you look at the end of all that, you will see "IMG_0716.pdf". That
is a PDF of what is in the package for sale.
73,
Ken, KJ9B
-Original Messa
I'm not sure where the voltage displayed on the K3 is sampled, but I have
found it to be consistently about a volt lower than the voltage present at
the Power Pole connector on the back of the radio, especially when in
transmit mode. I have found this to be the case on both the K3 I use for
portab
8 matches
Mail list logo