Well at least they have one out of 2 new products introduced. Next up, the HF
packer amp. Saving that reveal for Dayton.
72
Myron
WV0H
Printed On Recycled Data
From: Greg
Sent: Friday, April 21, 2017 6:38 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] KPA1500
Eric/Wayne...thank you, thank
Wait a second, there's a big difference between a sound pressure wave and an
electromagnetic wave at 10-kHz...
Myron WVØHPrinted on Recycled Data Original message From: Ken
G Kopp Date: 3/23/2017 7:41 AM (GMT-07:00) To: wa9fvp
, elecraft@mailman.qth.net Subject: Re: [Elecraf
Yep, the Sunforce one switches on and off.
Myron WVØHPrinted on Recycled Data Original message From:
Harry Yingst Date: 3/17/2017 8:27 PM (GMT-07:00) To:
thelas...@gmail.com, Harry Yingst via Elecraft
Subject: Re: [Elecraft] Who sells a small RF quiet solar charge controlle
The ultimate quite charge controller, an ON/OFF type that turns on when the
battery voltages falls to 13.1v and turns off when it reaches 14.4V and no
switching noise.
I have one of these and a Genasun GV-4 for SLA battery chemistry.
https://www.amazon.com/Sunforce-7-Amp-Charge-Controller/dp/B
I was once a 2-way radio tech and have installed over 1000 business band
radios (yes, over one thousand) in my 15 or so years career. One thing we, the
companies I've worked for, was NEVER to run a dedicated ground wire to the
battery. We used a short ground wire from the radio and the local ve
Hi Bob,
Which tab is that under?
Myron WVØHPrinted on Recycled Data Original message From: Bob
N3MNT Date: 7/25/2016 3:05 PM (GMT-07:00) To:
elecraft@mailman.qth.net Subject: Re: [Elecraft] KX3 Antenna Tuner Settings
Connect the KX3 utility it will show you the exact values t
Hi Ed
I was up at a Red Feather Lakes, CO for FD and had strange propagation as well.
Since I was the only op and there was a hot tub, I missed some prime operating
hours...
Sunday morning produced an opening on 15 with skip so short I worked WY and SD.
On 15m! Had to have been something other
David,
Set the radio for 5W in the TUNE menu first. Then press the tune button. I make
all of my power measurements with my KX3 set to 5W and TUNE.
John and I use these DL1s extensively. Google KN5L DL1 and read up on the diode
characterization and further reading about its use.
72Myron WVØHPrint
I have not experienced any RFI from my 4A Genasun MPPT controller.
Myron WVØHPrinted on Recycled Data Original message From: Jim
Brown Date: 6/6/2016 4:20 AM (GMT-07:00) To:
elecraft@mailman.qth.net Subject: Re: [Elecraft] Field Day
On Sun,6/5/2016 7:50 PM, Howard Hoyt wrote:
I'll second this request.
Myron WVØHPrinted on Recycled Data Original message From: John
Oppenheimer Date: 5/31/2016 2:15 PM (GMT-06:00) To:
elecraft@mailman.qth.net Subject: Re: [Elecraft] Suggested KX3 "upgrade"
My general operating style is to use a CW memory REPEAT for se
All,
I found it convenient to program the PF2 key to toggle the ATU/THRU function
with one button push. I have the PF1 key programmed as DUAL WATCH during the
winter months for Fox hunts and programmed as RX Preamp in summer for Field ops.
Myron WVØHPrinted on Recycled Data Original me
No Batteryspace.com batteries are balanced unless you specifically request a
custom pack with balancing. But they call it equilibrium.
Myron WVØHPrinted on Recycled Data Original message From: TFJM
via Elecraft Date: 4/26/2016 12:18 PM (GMT-07:00)
To: elecraft@mailman.qth.ne
Test reply.
Myron WVØHPrinted on Recycled Data Original message From:
Terry Brown Date: 3/9/2016 11:18 PM (GMT-07:00) To:
elecraft@mailman.qth.net Subject: [Elecraft] BL-2 Balun Enclosure
I have just ordered a BL2 balun kit. I assume it is a voltage balun
switchable 1:1 to 4
13 matches
Mail list logo
