Hi again,
I see that I wasn't clear enough for some folks as a few here and private
email have said a similar thing. So here is the issue: SOMETIMES with v
1.23 firmware, when changing bands, the amp will not drop into standby mode.
This setting is to protect the station from operator brain fade
I have KPA500 with 1.23 and KAT500 at 1.18 with radio at 4.60 with no standby
issues with the amplifier.
73,
Bill
AK5X
On Jan 31, 2013, at 11:22 PM, Rick Bates wrote:
>
> Hello all,
>
>
>
> Today I upgraded the KPA500 from V 1.18 to V 1.23. I now note the following
> problem: The amp
Rick,
I am running KPA500, F/W Ver 1.23. Oper/Stby is working fine here. Have you
checked if KPA500 Menu item "Band Chg" is set to "STBY"?
In STBY either band changes on the K3 or KPA500 work fine, putting the 500
from OPER to STBY. If Band Chg is set to "NOR", the 500 stays in OPER with
either
3 matches
Mail list logo